Description: Name:Refrigeration Air Compressor Item Number:HX-ZH25G Interchange Number :ZH25G Condition:New Number Of Piece:1 Set(As you see in the picture) Pins:8 Pins Application:LBP Displacement (cm³):2.5 Refrigerant:R134a Power Supply:12V / 24V Power Supply Type:DC Voltage:DC 10.9～17V, 22.7～31.5V C.O.P.:1.25 W/W Cooling type: FC Lubricating Oil:POE Oil Charge:160 ML Compressor Weight:3 (kg) Controller Weight:0.4 (kg) Motor Type:BLDCM Throttle Type:Cappilary 12V 24V DC Car Refrigeration Air Compressor Fridge Freezer Marine Solar QDZH25G12V 24V DC Car Refrigeration Air Compressor Fridge Freezer Marine Solar QDZH25G R134a We hope you can get correct goods.You must meet the following conditions:1.please must make sure your car type same one type of our product link.2.please must check our product photos in the link if same your old part.3.please kindly find your part of number depend our photo.then confirm same number on our web or contact us.(The number will appear anywhere in the part) Product InformationName:Refrigeration Air CompressorItem Number:HX-ZH25GInterchange Number :ZH25GCondition:NewNumber Of Piece:1 Set(As you see in the picture)Pins:8 Pins Performance ParameterApplication:LBPDisplacement (cm³):2.5Refrigerant:R134aPower Supply:12V / 24VPower Supply Type:DCVoltage:DC 10.9～17V, 22.7～31.5VC.O.P.:1.25 W/WCooling type: FCLubricating Oil:POEOil Charge:160 MLCompressor Weight:3 (kg)Controller Weight:0.4 (kg)Motor Type:BLDCMThrottle Type:CappilaryTest ConditionEvap. Temp.: -23.3Suction Temp.: 32.2Cond. Temp.: 54.4Subcooling Temp.: 32.2Ambient Temp.: 32.2Test Voltage: 12V DCNote:When 24V DC power inputs, the current is half of the above.RPM is 2000, Cooling Capacity is 45W ,Input Power is 36W, 38.7 Kcal/h ,153.5btu/h,Efficiency COP is 1.25 w/w,Electric Current is 2.9/1.4ARPM is 2500, Cooling Capacity is 55W ,Input Power is 44W, 47.3 Kcal/h ,187.7 btu/h,Efficiency COP is 1.25 w/w,Electric Current is 3.5/1.7ARPM is 3000, Cooling Capacity is 64W ,Input Power is 51W, 55 Kcal/h ,218.4 btu/h,Efficiency COP is 1.25 w/w,Electric Current is 4.1/2.0ARPM is 3500, Cooling Capacity is 74W ,Input Power is 59W, 63.6 Kcal/h ,252.5 btu/h,Efficiency COP is 1.25 w/w,Electric Current is 4.9/2.4ARefrigeration Temperature Scope: -35~10Shape: Cabinet Type (Open Outward)Type: Compressor Car RefrigeratorCertification: CE1) QDZH25G, DC series, use R134A refrigerant;2) Voltage application 12V and 24V;3) Cooling type: FC;4) Application: Low Back Pressure, Middle Back Pressure;5) Max cooling capacity 74W6) Power consumption in watt is 45 to 74w depends on rpm setting and back-pressure inside systemMaterial: Plastic And MetalColor: BlackInstallation:1:1 ReplacementPacking:Box Or EnvelopeFitment: For Danfoss BD25 DC compressorsFor water dispenser, small refrigerator, small freezer, wine cellar and other small cooling appliances used for car, ship and camping. ControllerLDCM is used for this compressor, please check the wiring diagram as below and connect thecompressors correctly. : 1) Controller must be connected with DC power terminal ①. Reversed connection will result in off work.2) To protect the controller, fuse protector ② must be connected at positive pole terminal. And it should be nearthe power supply as possible as you can. We recommend to use 15A fuse (12V DC) or 7.5A fuse (24V DC).3) If you add a main power switch ③, the rated current should not be less than 20A.4) Do not add any other circuit to avoid controller protect duo to overload voltage.5) Add a 10mA luminous diode between “+”and D. The error during compressor operation will be indicated bythe flicker times, every flicker will last 1/4 second, each error will repeat every 4 seconds. If failed to start,another start will be tried after 60 seconds, till starts successfully. Please see below for reference:6) Cooling fan is connected between F+ and F-. 12V DC cooling fan must be used for both 12V DC coolingsystem and 24V DC cooling system because the voltage between F+ and F- is permanent 12V DC. Thecurrent protection is 1A, we suggest use cooling fan of smaller than 5W.7) Temperature control ⑥ is connected between C and T, it will control the compressor to start or stop.8) Resistance for speed adjustment ⑦ is connected between C and T. The compressor rotary speed can bechanged by adjusting the resistance value. The rotary speed can be adjusted at the range of 2000rpm～3500rpm. Resistance ⑦ and the rotary speed is corresponding as below:9) Power supply protection resistance ⑧ is connected between C and P. Different resistance value will changethe protection set of the battery voltage. The protection set of the battery voltage is corresponding with theresistance ⑧ as below.10) Compressor controller can adjust to suitable voltage automatically, when voltage is lower than 17V,controller regards it working in 12V DC cooling system; when voltage is higher than 17V, the controllerregards it working in 24V DC cooling system. If you add a 220KΩ resistance between C and T, then thecompressor can work at the voltage of 9.6V～31.5V. Instruction of transportation and storage1） Keep vertical during transportation, do not reverse, avoiding big shake and shock.2） Store the compressor in the place of dry and good ventilation, avoid damped.3） 2 layer piled up is the limit for the carton packed compressor, turn over is forbidden during transportation.4） Stock date should not be longer than 6 month since come out from factory. Announcements1） Compressor must be driven by the compressor controller, work voltage is 12V/24V, do not allow toconnect AC power directly.2） Install the compressor promptly after the rubber plug is removed.3） The working ambient temperature should not be higher than 43℃, when working in the Max. ambienttemperature, the Max. condensing pressure should not be higher than 1.75MPa, the Max. peak condensingpressure should not be higher than 2.17MPa.4） Pressure balance（43℃）When starting, there should not be pressure of 0.5MPa or above inside thecompressor body.5） The next start should be delayed 5 minutes or above after the compressor stops.6） Do not use compressor for vacuum purpose, do not power the compressor in vacuum condition.7） Keep the cooling system clean, avoid chlorine ion, paraffins, etc.8） To start and operate the compressor regularly, the wiring of the power supply and controller must apply tothe following sheet: WarrantyWithin 12 months after come out from factory. In the condition that customers apply to this instruction, our company is responsible for the damaged compressors result from production.If the damage is caused by improper use of the customer or the customer's reason, the buyer needs to bear the return shipping cost for warranty repair. Exterior drawings PaymentDelivery detailsWarrantyAbout usContact usPaymentPAYMENTWe accept Credit Card, Debit Card and eCheck payments through PayPal.Buyers are required to arrange a payment within 72 hours of auction closing.eCheck payments take 3 to 7 business days to clear through PayPal.PLEASE NOTE: Our Price DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.Please list your special requests (color, packages, etc.) in the EBAY NOTES SECTION when you make payment.Delivery detailsSHIPPING We ship items to your EBAY confirmed address only. Please make sure your address in Ebay is matched with your shipping address before you pay.We are unable to take any responsibility for wrong address, any custom delay or tax. Transit time is highly depended and provided by Postal Service.All items will be dispatched within 1 business day after receipt of payment.It may take longer to other countries or remote areas.If you have not received your shipment within 30 WORKING days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is 100% customer satisfaction.We are not responsible for any custom duty or import tax.Customs duties are stipulated by the laws and policies of the recipient country, and tax payment is the responsibility and obligation of citizens. If the package is returned or destroyed because the buyer does not bear customs duties, we will not bear the return cost, freight and compensation for the goods WarrantyWARRANTYWe offer with a 60-DAY SATISFACTION GUARANTEE! Customers should inspect item(s) and notify us within 60 days of any problems.If you have a problem with your item, please contact us before leaving feedback. All items being returned must be issued a RMA number BEFORE they are returned.Return shipping fee should be paid by the Buyer.12 months Warranty from the date of purchase covering manufacturing defects. This warranty excludes any damage caused by the Buyer.About usABOUT USWelcome to yukai2017 eBay store! We are a professional worldwide wholesale company with our own factory located in China.We supply many products including Consumer Electronics, Home & Garden, Health & Beauty, Apple accessories, Computers accessories, Car accessories, Clothing accessories, Sports & Outdoor Accessories.Our principle: offer high quality product to worldwide at reasonable prices. Customers 100% satisfaction is our top priority.Contact usFEEDBACK100% Customer satisfaction is our top priority.Please give us a chance to resolve any issues before leaving a feedback or opening disputes.Business hours of operation: Monday - Friday:9:00 AM - 6:00 PM Standard Beijing Time Saturday, Sunday and all Public Holidays: Closed
Price: 156 USD
Location: Rancho Cucamonga, California
End Time: 2023-12-09T04:19:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Non-Domestic Product: No
Other Part Number: ZH25G
Cooling type: FC
Custom Bundle: No
Manufacturer Part Number: QDZH25G
Compatible Model: For Danfoss
Replacement: for Danfoss BD25 DC compressors
Superseded Part Number: For water dispenser, For small refrigerator, For small freezer, For wine cellar, other small cooling appliances used for car, other small cooling appliances used for ship, other small cooling appliances used for camping, QDZH25G
Modified Item: No
Displacement: 2.5 m³
Power Supply: DC 12V 24V Universal
Oli Charge: 160 ml
Brand: GORST
Type: A/C Compressor
Interchange Part Number: QDZH25G
OE/OEM Part Number: QDZH25G
Manufacturer Warranty: 1 Year
Surface Finish: New
Country/Region of Manufacture: China
Application: LBP
Pulley Groove Quantity: 0
