Yokomo MDR020 MD 2.0 Master Drift 1:10 Electric 2WD RWD Drift Car Kit

Description: MD 2.0 MASTER DRIFT RWD 1-10 PREMIUM RC DRIFT CAR KIT MD2.0 [YOKOMO] MDR-020 The MD 2.0 has to be the most cutting-edge, Revolutionary, and most fully loaded drift chassis to come out of Japan. Yokomo's team prides themselves with a relentless dedication to design principles and an unwavering commitment to the art of drifting that paves the path to unmatched supremacy. This ultimate competition vehicle achieves its pinnacle form through the integration of light weight aluminum components and the sleek aesthetics of luscious woven graphite.The Yokomo MD 2.0 boasts a multitude of attributes that lock it in as a formidable chassis with supreme drifting prowess! It offers a fully adjustable Ackermann ratio, enabling drivers to fine-tune their steering performance by moving the slide wrack forward and backward. The bearing-mounted upper deck allows torsional chassis flex while maintaining verticle stiffness ensuring smoother handling and better traction. The floating battery holder is attached directly to the rear bulkhead and is designed to transfer the battery weight directly to the rear axle which in turn generates rear traction. To complete this exceptional package, the chassis features differential height adjustments, providing the flexibility needed to achieve the perfect balance. The MD 2.0 stands as the ultimate choice for dedicated drifters seeking a finely tuned and responsive drift missile that blows the competition off the track!NOTE:Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.FEATURES:Updated steering blocks for overwhelming cutting anglesSilky smooth 4-Gear transmissionDifferential height adjustmentsFully adjustable Ackermann ratioRear bias servo mountAluminum rear bulkheadlight weight slide rackRedesigned front and rear hubsBearing mounted upper decklight weight resin front bulkheadFloating battery holderIncluded magnetic body mountsSPECIFICATIONS:Scale: 1/10Drive: RWDPower Source: ElectricAssembly Level: KitYOU WILL RECEIVE:(1) Yokomo MD 2.0 Super Drift 1/10 Electric RWD Drift MissileNeeded to Complete:(1) 2-3 Channel radio system(1) Electronic Speed Control(1) 540 Motor(1) Steering Servo(1) Drift Gyro(1) 2S (7.4V) LiPo battery(1) Compatible Battery Charger(1) Drift tires & stylish Wheels(1) 190 - 200mm Touring or Drift body(1) Polycarbonate paint for bodyTools for assembly * THIS IS A CHASSIS KIT ONLY, ELECTRONICS NOT INCLUDED *A drift machine that is built by polishing each part one by one. With our uncompromising design philosophy and commitment to drifting, we will pave the way to unrivaled excellence. The ultimate competition machine is completed with the weight of aluminum parts and the lacy image of graphite.■Graphite double deck chassis■Graphite F&R suspensionarm ■New aluminum front bulkhead■Multi-position slide rack■Aluminum front upper arm■New F&R hub carrier■4 gear transmission■F&R magnet body mount■Floating battery holder■Rear ESC mount What you need to run the assembled kit: 2-channel radio set (transmitter, receiver, speed controller, servo), steering gyro, battery (short size Li-po 2 cells), charger, motor, drift body , Paint for drift tires, wheels, pinion gears, and polycarbonateDesigned with an aluminum bulkhead for increased rigidity. Even with quick swings, you can run with less twisting.Set to Ackermann ratio that maintains toe out slightly more than parallel. The standard kit alignment is especially designed for driving on P-tile roads.An aluminum upper arm is adopted as standard. It is possible to enhance the trace feeling of the front and increase the variation of running lines.For the first time, magnetic mounts are used as standard on both the front and rear.The battery holder is also made of graphite and has a lightweight finish. The battery is placed as close to the gearbox as possible to maximize rear load.The front steering block is equipped with the latest inline axle. The position of the steering stopper has also been revised to maximize the steering angle.The steering servo has been relocated to the battery position, resulting in an ideal 3:7 weight balance. The steering crank is also made of aluminum for sufficient response.The front suspension arm, which was previously a hanging type, has been redesigned to be mounted on the main chassis. This increases the rigidity of the front and enables a sharp ride typical of a competition machine.It is possible to move the motor around the spur gear axis. Adjusting the front and rear weight distribution will greatly affect the direction of the settings.The standard transmission is a 4-gear specification, which increases rear traction during acceleration. By using the optional aluminum axle adapter, it can be converted to 3 gears.By mounting the rear bulkhead closer to the front and changing the mounting position on the front side of the upper deck, it is possible to convert to a short wheelbase specification (approx. 10mm short).A graphite rear ESC mount is standard equipment.You can quickly access the differential by removing the cover on the bottom of the bulkhead. Settings by changing the oil viscosity of the gear differential and maintenance of the ball differential can be done quickly.The rear body post is made of aluminum. The mount position can be precisely set according to the body shape.

Price: 619.99 USD

Location: Racine, Wisconsin

End Time: 2024-11-22T19:04:58.000Z

Shipping Cost: 0 USD