Waveshare 2.15inch E-Paper Display (G) E-Ink Display 296x160 SPI, Low Power

Description: Description 2.15inch e-Paper display (G), e-ink display, 296x160, Red/Yellow/Black/White, SPI Interface2.15″ e-Paper (G)low power, wide viewing angle, paper-like effect without electricityIdeal for price tags, shelf labels, industrial instruments... Note: the driver board is optional, please refer to the Package Content for detailed part listSize2.15″Resolution296×160Viewing Angle>170°Display ColorRed/Yellow/Black/WhiteGrey Scale2CommunicationSPIDisplay PanelE-paperExperiencePaper-likeEnvironmentAmbient Light RequiredDisplay TypePassively ReflectiveHAT+ StandardImproves interoperabilityVersion Options2.15inch e-Paper (G)raw display, without driver board 2.15inch e-Paper HAT+ (G)with driver boardFeatures at a glanceNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingComes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32)Optional for e-Paper driver board:Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry PiAdapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc.Onboard voltage translator, compatible with 3.3V / 5V MCUsSpecificationsoperating voltageRaw display: 3.3Vdisplay colorRed/Yellow/Black/Whitewith driver board: 3.3V/5Vinterface3-wire SPI, 4-wire SPIgrey scale2outline dimensionsRaw display: 60.8 × 31.8 × 1.00 (mm)full refresh time20swith driver board: 65 × 34 (mm)display size48.10 × 26 (mm)refresh power<50mWDOT PITCH0.1625 × 0.1625 (mm)standby current<0.01uA (almost none)RESOLUTION296 × 160 pixelsviewing angle>170°Advantages of EINKE-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.Standard Raspberry Pi 40PIN GPIO Headercompatible with Raspberry Pi series boards, Jetson Nano, RDK X3* for reference only, the Raspberry Pi in the picture is NOT included.Optional for e-Paper driver boardOnboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32VCCPower (3.3V / 5V input)GNDGroundDINSPI MOSI pinCLKSPI SCK pinCSSPI chip selection, low activeDCData/Command selection (high for data, low for command)RSTExternal reset, low activeBUSYBusy status output pinOnboard Voltage TranslatorCompatible With 3.3V / 5V MCUsApplication examplesSuitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...supported driver boards for raw display2.15inch e-apper (G) with driver board2.15inch e-Paper HAT+ (G)Click here to purchaseUniversal e-Paper Raw Panel Driver HATe-Paper Driver HATClick here to purchaseOutline dimensions2.15inch e-Paper (G) 2.15inch e-Paper HAT+ (G) Resources & Services Package Content Weight: 0.026 kg2.15inch e-Paper (G)2.15inch e-Paper (G) x12.15inch e-Paper HAT+ (G)2.15inch e-Paper HAT+ (G) x1GH1.25 9PIN cable x1Screws pack x1123

Price: 14.61 USD

Location: 深圳

End Time: 2024-12-01T07:51:57.000Z

Shipping Cost: 0 USD