Description: 2.13inch Touch E-Paper E-Ink Display For Raspberry Pi Zero, 250×122 Pixels, ABS Protection Case2.13" TOUCH E-PAPER WITH CASEPartial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like EffectSpecialized for Raspberry Pi Zero / Zero W Size2.13"Resolution250×122Viewing Angle>170°Display ColorBlack and WhiteGrey Scale2Touch TypeCapacitiveTouch Points5-PointsTouch PortI2CTouch PanelToughened GlassCommunicationSPIPower ConsumptionUltra LowDisplay DurationPersists without PowerDisplay PanelE-paperExperiencePaper-likeComfortably ReadingEye Care, No BluelightEnvironmentAmbient Light RequiredDisplay TypePassively ReflectiveRefreshingPartial Refresh SupportEnclosureABS Dull PolishFeatures At A Glance2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixelsSupports waken up by user-defined gestureNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero WComes with development resources and manual (examples for Raspberry Pi)SpecificationsOPERATING VOLTAGE3.3VGREY SCALE2INTERFACE3-wire SPI, 4-wire SPIPARTIAL REFRESH TIME0.3sOUTLINE DIMENSIONS69.15 x38.90mmFULL REFRESH TIME2sDISPLAY SIZE48.55 x23.70mmREFRESH POWER26.4mW(typ.)DOT PITCH0.194 x0.194mmSTANDBY CURRENT<0.01uA (almost none)RESOLUTION250×122 pixelsVIEWING ANGLE>170°DISPLAY COLORblack, whiteTOUCH POINT5 (max)Advantages Of EINKE-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.Fine Design, Precise Cut-OutHighly Aligned Connectors, Rounded Corner Design, Slant Sides For Easily StandingHeat Dissipation Holes On The BackCombined With Thermal Tape, Effective Heat DissipationStandard Raspberry Pi 40PIN GPIO HeaderCompatible With Raspberry Zero / Zero WRaspberry Pi in the photo is NOT included.DemonstrationPinout DefinitionOutline DimensionsHow To InstallPACKAGE CONTENTWeight: 0.043 kg2.13inch Touch e-Paper HAT x1ABS case x1Screwdriver x1Thermal tape x1rubber feet 4PCS x1Screws x2
Price: 28.37 USD
Location: Shenzhen
End Time: 2024-09-17T10:43:24.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
Screen Size: 2.13
Maximum Resolution: 250×122
