Description: Adjustable Skateboard wall mount hanger. This wall mount renders all Non-adjustable wall hangers OBSOLETE!Note: This listing is for Silver/Pink mount. Pics with other colors in this listing represent features only. See other listings for other colorways.You will receive quantity (1) one fully assembled wall mount, (1) wall anchor & screw. Select the desired quantity from dropdown.These wall mounts have 3 inches of vertical (up and down) adjustability, allowing you to install your decks in a straight horizontal line on your wall. You can easily swap out, or shuffle decks around while maintaining an aesthetically pleasing look without drilling new holes in your wall.If you have smaller decks, "mini's", or early 80s stub nose decks in your collection, nothing, is more agitating than having it hang higher than the rest of your decks, throwing off the straight line and ruining the look.These mounts also make it easy to install decks horizontally when they have a “landscape” oriented graphic, eliminating time-consuming measuring. Note: You will need two (2) wall hangers to mount decks horizontally.The mounts come with 2.5-inch screws which extend 2.95 inches from wall. (long enough for most decks).We also have 3.0-inch screws available (Extends 3.45 inches from wall). These give you extra reach for complete skateboards. (See other listing for these). Swapping out the 2.5-inch screws for the 3 inch screws can be done without removing the screws from the sliding bar. This should only take a minute. (WATCH VIDEO ON THE LISTING FOR THE 3.45-INCH OPTION)The center-to-center measurement for the 2 screws is 1.61 inches. Most decks are in the 1.61-to-1.625-inch range. As with any mount that use 2 screws to hang decks, you may have to slightly manipulate the screws with your fingers to widen or make narrower to fit the truck holes (minimal pressure applied). Installation instructions:1. Determine how many inches down from the ceiling you want to install the mounts. You will also want to determine how many inches apart to install the mounts across the wall horizontally (12 to 14 inches center to center is common).2. Drill a 1/4-inch hole in the drywall/sheetrock for each mount location.3. Press the blue plastic anchor into the drilled hole in the wall. The anchor will have a slight lip that sticks out proud from the wall. This lip will fit in the recess on the back of the mount making it flush against the wall.4. Place wall mount center hole over the anchor and use a Phillips screwdriver to install the screw. The front of the mount has a 0.5-inch access hole so you can install the screw.5. Once the mount is securely installed on the wall, remove the (2) plastic knurled cap nuts. Make sure the wing nuts are tightened securely and put the deck on the wall by lining up the (2) screws with the decks factory drilled truck holes. Adjust the “knurled stops” to keep each deck the same distance from the wall.6. Once you have the first 2 decks on the wall step back a few feet to see if they are uniformly centered with each other. If adjustments, up or down are needed, REMOVE the deck first. It is CRITICAL that you pull the deck off the wall/mount when adjusting so that you don’t accidentally knock the deck off the wall and damage it.7. Continue to install all the decks one at a time, adjusting along the way per Step 6.8. Install cap nuts.NOTE: Some imperfections do occur during 3d printing. Each mount is carefully inspected for QUALITY. Any small imperfections in the plastic are superficial and do not affect strength or fit/form/function.Please hang responsibly. Not liable for accidents, damage, or loss incurred.Check out our other listings with different color options.
Price: 13 USD
Location: Wichita, Kansas
End Time: 2024-08-10T21:57:44.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Powell Peralta
Model: NOS
