Vintage "Member of the Tijuana Pussy Posse" Iron-On Transfer

Description: Vintage "Member of the Tijuana Pussy Posse" Iron-On Transfer - Rare NOS ### **Description**: This vintage iron-on transfer, featuring the bold and humorous "Member of the Tijuana Pussy Posse" design, is a **rare find** and a perfect piece for collectors or enthusiasts of retro apparel. Measuring approximately **9.25 x 5.25 inches**, this transfer is in **new old stock (NOS) condition** with minor creases and imperfections typical of its age. A true vintage item, this is **not a reproduction**. To ensure proper adhesion, this transfer must be applied using a **professional heat press**. Older transfers like this require high heat and even pressure to adhere correctly. If you don’t have access to a commercial heat press, it’s strongly recommended to visit a local T-shirt shop with experience applying vintage transfers. Alternatively, you can preserve this collectible in its original state as a piece of retro memorabilia. Because of the item's vintage nature, **there is no guarantee that it will adhere perfectly**, as application depends entirely on the equipment, method, and operator. **Details**: - **Size**: Approx. 9.25 x 5.25 inches - **Condition**: NOS (New Old Stock) with minor imperfections and creases from storage - **Authenticity**: 100% original vintage iron-on transfer, NOT a reproduction A rare and fun addition to any collection, this transfer captures the bold humor and style of vintage novelty designs. Handle with care and enjoy! ### **Heat Press Application Instructions for Vintage Transfers** If you're applying this vintage iron-on transfer using a **professional commercial heat press**, follow these instructions to maximize your chances of success while protecting the transfer: 1. **Prepare the Garment**: - Use a clean, pre-washed, and fully dried garment (preferably 100% cotton for best results). - Lay the garment flat on the heat press, ensuring there are no wrinkles. 2. **Set the Heat Press**: - **Temperature**: Start at **325°F–350°F**. Use lower temperatures for older or more delicate transfers. - **Pressure**: Set the heat press to **medium-to-firm pressure**. - **Time**: Begin with **20-30 seconds** for the initial press. 3. **Position the Transfer**: - Place the transfer face down on the garment, with the design side touching the fabric. - Cover the transfer with parchment paper or a Teflon sheet to protect both the transfer and your press. 4. **Press and Heat**: - Lower the heat press and hold it in place for the designated time (20-30 seconds). Ensure even pressure across the entire transfer. 5. **Peel Backing Carefully**: - **Cool Peel**: Allow the transfer to cool for 10-15 seconds before peeling. - Peel the backing slowly and evenly. If any part of the design does not adhere, carefully reapply heat for an additional 5-10 seconds. 6. **Set the Design (Optional)**: - After peeling, cover the design with parchment paper or a Teflon sheet and press again for 5-10 seconds to secure the transfer fully. --- ### **Important Notes**: - Vintage transfers are delicate due to their age, so handle with care during the process. - Avoid overheating, as it can scorch the transfer or garment. - If you are unsure about applying the transfer yourself, take it to a **professional** with experience in handling vintage heat transfers. Because this is a vintage item, proper adhesion cannot be guaranteed and depends on the equipment, method, and technique used. These steps are a general guideline for working with older iron-on transfers.

Price: 24.98 USD

Location: Ocoee, Tennessee

End Time: 2024-12-29T03:58:15.000Z

Shipping Cost: N/A USD