Description: Power Supply: DC12-48V Spindle:48V 0-500W Stepper Motor:X/Y1/Y2/Z Fan:12V Connect Laser:2pin/3pin/2pin-2pin Support:Servo/Offline controller/Limit switch Connection:USB Cable Friendly Reminder: 1. The spindle motor and laser cannot be connected at the same time 2. The offline control board and the USB data cable cannot be connected at the same time 3. Turn on the power after the electrical connection is completed 4. The positive and negative of the input power must not be reversed, and the reverse connection will burn 5. The 48VDC interface cannot be connected to the switching power supply, and the voltage that can be passed through the DC seat of the control board cannot be greater than 5A Feature: 1. The spindle motor and laser cannot be connected at the same time 2. The offline control board and the USB data cable cannot be connected at the same time 3. Turn on the power after the electrical connection is completed 4. The positive and negative of the input power must not be reversed, and the reverse connection will burn 5. The 48VDC interface cannot be connected to the switching power supply, and the voltage that can be passed through theDC seat of the control board cannot be greater than 5A 1* controller 1* USB cable 1*775 motor cable Spindle: Laser: Install on machine:
Price: 22.09 USD
Location: Hainesport, New Jersey
End Time: 2023-11-04T09:09:50.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: LUNYEE
MPN: Does Not Apply
Number Of Axes: 3
Input Voltage: 12 V
Application: Dual Axis
Run Method: Bipolar
Model: 3 axis control board 5.2
Country/Region of Manufacture: United States
Modified Item: No
Input power: 24V/5A (support 48V500W power supply)
Drive form: Onboard 4 drives
MCU model: MEGA328P/Arduino
Support axis: X, Y1, Y2, Z，
Support limit switch quantity: X+, X-, Y+, Y-，
Offline: support
