U.S. Solid 25KW High Frequency Induction Heater Furnace 480V, 18:1 Turns Ratio

Description: FEATURES Adopts the latest MOSPET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power. Power consumption is half of traditional electron tube high frequency induction heating equipment under same conditions. With 100% load design, can work in 24 hours without stop. Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation. With heating-insulating-cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batched and repeated heating situations. With multiple status display of overflow, over voltage, low water, phase failure and load malfunction, providing higher reliability and sustainability. Select power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy. Refer to USS-HFIH00001: INTRODUCTION VIDEO, OPERATION VIDEO. SPECIFICATIONS Brand U.S. SOLID Model USS-HFIH00003-480V Max. Inductive Power 25 KW Max. Input Power 16 KW Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) 18:1 Input Voltage Three Phase; 480 V Output Current 200-1400 A Min. Water Temperature 26 ℃ (78.8 ℉) Max. Heating Temperature 1200 ℃ (2192 ℉) Fluctuating Frequency 30-80 KHz Time Settings 01 to 99 seconds Water Temperature Protection Point 40 ℃ (104 ℉) Flow Rate of Cooling Water ≥ 7.5 L/min Min. Water Pressure 0.3 MPa Head of Cooling Water ≥ 30 m (98 ft) Min. Wire Gauge 9 gauge Circuit Breaker ≥ 30 A Net Weight 25 kg (55 lbs) Product Dimensions 22" x 9" x 19" Accessories on sale M8 Screw 6mm Copper Pipe 8mm Copper Pipe Tig Water Cooler This machine can't be used with a plug, it need a wire to connect the machine to power line directly (The cross-sectional area of power line must be larger than 6 square milimeters). The water temperature must not be lower than 26℃ to prevent a large temperature difference from the ambient temperature, which will cause condensation on the water pipes to form water droplets. PACKING LISTS 1 x LH-25A Induction heater 1 x Foot pedal 3 x Fuse 4 x Stainless steel clamp 2 x Copper tubing to connect your own coil (about 0.5 ft long) 1 x Copper tubing to creat your own coil (about 5 ft long) 1 x Copper coil (about 3.3 ft long) 1 x Rubber hose (about 32 ft long, 3/4" diameter) We can also make customized heating coil, the shape and diameter is determined by the workpiece you will process. If you make customized heating coil, please tell us the detail workpiece information. APPLICATIONS Brazing: Hybrid welding of different materials. Clean the surfaces to be used. Dimension of the workpiece should be less than 1.2" x 1.2" x 1.2". Diathermy: The diameter of the workpiece should be less than 5 mm (3/16"). Sealing: This can be used to seal and cap different machines. Be aware of the metal type used in the seal. Hardening: Many metals can be heat-treated to induce hardening. Most often, this process requires quenching right after heating, so have a quenching station available. Annealing: Some heat-treated metals will end up softer. Be aware of the type of metal you are heat-treating; results can differ. Soldering: Much like brazing, clean the surfaces to be used. Be aware that solder can melt very quickly. Smelting: Many metals can be smelt, e.g., copper, silver, and gold. MORE OPTIONS Model USS-HFIH00001-110V USS-HFIH00001-220V USS-HFIH00011-110V USS-HFIH00011-220V USS-HFIH00003-480V USS-HFIH00012-480V USS-HFIH00010-220V Max. Inductive Power 15 KW 25 KW / Max. Input Power 7 KW 16 KW 6 KW Output Current 200-600 A 200-1400 A 5-30 A Turns Ratio 16:1 16:2 18:1 18:2 / Input Voltage Single Phase; 110 V Single Phase; 220 V Single Phase; 110 V Single Phase; 220 V Three Phase; 480 V 180-245 V Description The length of the coil that can be heated is about 1 meter, which is used to heat relatively small metal parts. It will be faster if the outer diameter of the workpiece is less than 30mm. The length of the coil that can be heated reaches 2-2.8 meters, which can be used to smelt 2kg copper. The length of the coil that can be heated is about 1 meter, which is used to heat relatively small metal parts. It will be faster if the outer diameter of the workpiece is less than 30mm. The heating speed of USS-HFIH00003 is twice that of USS-HFIH00001. The length of the coil that can be heated reaches 2-2.8 meters, which can be used to smelt 2kg copper. The heating speed of USS-HFIH00012 is twice that of USS-HFIH00011. Used for heating workpieces with an outer diameter less than 12mm or quenching． SHIPPINGAll orders will ship from within 5 business days of payment. Delivery may be delayed due to carrier delays and/or other issues.All of our customers are very important to us, if you have a delivery or quality problem, please do not open a case but contact us promptly via eBay message, we will try our best to resolve it with you. RETURN POLICYReturns are accepted within 30 days of the buyer receiving the item. Buyer is responsible for return shipping if it's not our fault. We will issue a refund within 2 business days of receiving the returned item.Returned items must be in their original condition, custom items cannot be returned.

Price: 2399.89 USD

Location: Cleveland, Ohio

End Time: 2024-10-13T05:43:04.000Z

Shipping Cost: 0 USD