Description: UPPER BEARING DRIVE COLLAR #DP-250FOR SECURING THE QUILL BEARINGS IN A DELTA 14” DRILL PRESSSPECIAL HARD-TO-FIND TANGED DRIVE COLLARThe drive collar is CNC machined from C-1018 carbon steel. It is dimensionally identical to the original Delta part number DP-250. It comes complete with a stainless steel 5/16-18 set screw. The collars in the photo are as machined, before being black oxide plated. The collars will all be black oxide plated for increased corrosion protection and for appearance. The first few collars sold may be delivered prior to our first batch of product coming back from the plater. To rebuild a vintage Delta DP-220 drill press quill, you will need one pair of quill bearings, two spanner nuts, and one upper bearing drive collar. It is important that the lower quill bearing be engaged in the tangs in the lower collar just above the chuck.It is just as important that a bearing drive collar be installed above the upper quill bearing. This part is #DP-250 and has two tangs that must engage the two slots in the center race of the upper bearing. The DP-250 collar also prevents the spindle shaft from sliding out the bottom of the quill.These special bearings with the notched internal sleeve lock the inner race of the bearing to the rotating spindle of the drill press. The notches insure that the inner race of the bearing spins with the spindle shaft. This listing is for one upper bearing drive collar #DP-250. The spanner nuts #DP-242 are available in another of our eBay listings. Shipping is 5.00 to anywhere in the lower 48 states. Other locations may have to pay an additional shipping fee. Payment by PayPal is preferred.
Price: 24.75 USD
Location: Freeland, Michigan
End Time: 2024-08-17T16:26:27.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Delta
Model: n/a
MPN: DP-250
