Tubular Lower A-Arms, Coilovers, No Strut, 5/8 In Narrower, Fits Mustang II

Description: Upgrade to a cleaner looking control arm with these tubular no-strut style control arms, These coil-over style control arms eliminate the stock spring pocket which also improves the appearance, Sway bar brackets are welded on to allow for easy installation of sway bars, 5/8" Narrower than stock width allows for more tire to fender clearance, Bushing and gusset are included to weld to crossmembers that do not already have them Mustang II Tubular Lower A-Arms, Coilovers, No Strut, 5/8 In Narrower Sku # 91035337 Mfr. Part # 91035337 Condition New Brand Speedway Motors Sold Pair Details Info You don't have to look any farther for tubular control arms for your Mustang II IFS-equipped hot rod. Our Mustang II control arms are made from full .120 wall, 1" diameter tubing, fixture welded and feature screw-in ball joints and no-squeak rubber bushings. These new generation, no-strut style arms eliminate the strut rod found on stock-style Mustang II IFS systems. The improved, triangulated design provides stability and strength within the arm itself, so you can get rid of that ugly strut rod. Will work with nearly any stock or aftermarket Mustang II front crossmember (welding is required on most applications). Lower control arm accepts most coil-over shock assemblies. These control arms are 5/8" narrower than stock, which means that they will reduce front track width by 5/8" per side (or 1-1/4" overall) when compared to a stock width control arm. This helps tuck the wheels up under the fenders without having to buy expensive special offset wheels. When using 5/8" narrower control arms, 5/8" must be removed from each inner tie rod end. 5/8" Narrower than stock width Upgrade to a cleaner looking control arm Full .120" wall, 1" diameter fixture welding tubing Features screw-in ball joints and no-squeak bushings Works with nearly any stock or aftermarket crossmember Welding may be required on some applications Designed to correspond with coil-over style springs and shocks Works with Mustang II crossmembers that come without lower A-Arm tabs Non-strut rod applications Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type do. Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type do. Charts (PDF) (GIF) Installation Tips Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type do. Specs Material Type Steel Sold in Quantity Pair Finish Natural Tube O.D. 1.00 Control Arm Style Tubular Position Lower MFG. Part # 91035337 Reviews Parts were shipped quickly. Delivered within 4 days of orde Rated by 36 Ford on January 03, 2022 Summary: Customer Service was Great! Cons: None! Yes, I recommend this product. Mustang lower control arms Rated by DRAGNRYDR on December 07, 2021 Summary: Looks to be well built. Only problem was with the bolts, one was bent. Replacing them with grade 8 hardware. Cons: Cheap bolts, one was bent. Yes, I recommend this product. Read this one as well!!! Rated by Jay on October 18, 2020 Summary: In the first review, I stated a CON on being unpainted... Just filling in all the blanks... Just in case youre reading this one first, These a the jelly that you need for the peanut butter.... LOL I have a HEIDTS Mustang II front end on a 76 Vega, as you can see from the picture with the tire outside the fender, I had the wrong offset, went to a Weld Wheel with the most I could find and still not enough. That is when I found these narrowed control arms on Speedway Site... What a savings over the HEIDTS product. Instructions are clear and understandable, just painted them with oil base black paint. These are MUCH more safer than the Mustang II style system, once the bushing starts to fail, it causes the car to be harder to control when stopping... With these control arms installed, the car handles a lot better over the stock set up. When you buy, go when the upper and lower, Great quality at a fraction of the Heists price. Well worth the purchase... Yes, I recommend this product. I would Recommend this item for sure Rated by Circle Track Speed on April 23, 2020 Summary: Great Item Keep up the Quality Yes, I recommend this product. Real QUALITY parts from Speedway! Rated by John on February 03, 2020 Summary: I used the Lower control arms on a 1937 Ford Pickup I am building with a Mustang II front suspension. I bought some cheaper foreign made arms that created other problems for me, so I turned to Speedway for the fix. These arms are great. You get what you pay for, I just wish I could remember that when I try to save a dime. Yes, I recommend this product. Related Items / Suggested Parts Heidts Mustang II Tubular Lower Arms, Coil-Overs, No Strut, 5/8 Less Mustang II Coil-Over Lower Control Arm Mount Spacers, Set/4 Speedway Motors LCA Bolt 5/8-11 X 12 Inch, Grade 5 Replacement Tubular Mustang II Lower Control Arm Bushing Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 299.99 USD

Location: Lincoln, Nebraska

End Time: 2024-09-07T12:02:55.000Z

Shipping Cost: 0 USD