Traxxas TMAXX t-maxx 3.3 electric conversion (blue) mount set for 775 motor

Description: ****NEW ITEM**** Traxxas Tmaxx 3.3 electric motor conversion blue plastic mount set for 775 size brushed or brushless motors. Set includes 1 Motor mount, 1 ESC mount, 1 Battery mount, 1 Spur gear, 7 Velcro straps, and 15 mounting screws. Mounts to existing chassis screw holes, you will need to remove the fuel tank and battery/switch box. Included Items: 3 x Mounts 1 x Spur Gear 15 x Screws 7 x Velcro Straps (straps will be all black or all gray depending on availability) Motor screw holes are 29mm apart. 3D printed with Premium PLA+ thermoplastic. The motor, motor pinion, ESC, and battery are not included.optional servo and receiver mounts seen in some of the pictures are sold separately and are not included in this set. You will only receive the 3-mounts, one 72 tooth 32pitch spur gear, 15 mounting screws, and 7 Velcro straps.Please see all pictures for reference. Your item will be shipped via USPS Ground Advantage with tracking included.Ground Advantage has replaced First Class Package Service®***Also please see my other listings for the 2.5 tmaxx mounts, servo mounts, and receiver mount all sold separately.***Thank you!!! Recommended Basic Setup: 3.3 TMAXX (with Gray Transmission) 775 size brushed motor or brushless motor. 72T 32P spur gear and 27T 32P pinion gear. ESC capable of forward only. 4s 5000mah or similar battery pack. A channel splitter (servo Y harness) to run the brake servo and ESC together on the receiver’s throttle channel. Transmission adjustments: Tune the shift point of the second speed to happen sooner. Turn the adjustment screw 1/8 turn counterclockwise to lower the shift point (earlier shifts) Use 1/8 turn increments to find the approximate, desired shift point. Note*** Some Important Tips: If the brake engages while going forward you will need to reverse the motors polarity and reverse the throttle channel on your transmitter. When you attach the mount to the chassis use the included screws, they should go upwards through the chassis screw holes then thread up into the mount from underneath the chassis. See the mounting screw location photo for reference. Please be aware that some aftermarket chassis are different than the original Traxxas 3.3 Tmaxx chassis and might be missing some of the screw holes needed. Avoid using any type of countersunk or small head motor screws to attach your motor to the mount. Add flat washers to your motor screws or use the included large head motor screws, it will clamp more of the mount surface preventing the motor from moving around and possibly damaging the mount or stripping your gears. Motors with higher RPMs are better at reaching second speed sooner. Your motor operating temperature range should be around 120°F to 150°F max. If you start to see 150°F or more, it's time to change your pinion/spur gear ratio or check your drive train for binding. It is also a good idea to add a motor heat-sink or cooling fan to your motor.

Price: 32 USD

Location: USA

End Time: 2024-03-09T02:28:44.000Z

Shipping Cost: 0 USD