Toyota Supra MKIV 2JZGTE Turbo 2jz-gte 1000cc Bosch ev14 fuel injectors vvti JDM

Description: 1000cc Bosch ev14 Fuel Injectors with Plug & Play Injector adapters for 2JZGTE with top-feed fuel rail setup! Looking for bigger injectors for your high powered Supra? Look no further. The Auction is for a complete set of 6(pcs) Bosch 1000cc High Impedance Top-Feed Injectors for 2jzgte with aftermarket top-feed fuel rail setup such has HKS, Greddy, or similar with 11mm/10.5mm inlet. The injectors are dynamically and statically flow tested and packed in a balanced set with 2 percent of each other. Injectors will come with flow sheet with injector specs for easy tuning. The bosch ev14 injectors are compatible with all known race fuels in today's market including e85. At the engines stock fuel pressure of (43.5psi) the injectors can support engines making up to 1000hp (@ 80% duty). At 4bar fuel pressure the injectors can support engines making up to 1100hp. The injectors cone spray pattern which will provide proper fuel atomization resulting in smoother idle, and clean combustion characteristics. With the combination of a balanced set and great fuel atomization, you will achieve light and partial throttle drivability, lower emissions, easier tuning, and more power output to the wheels. The Injectors are E85/Alcohol Compatible. INJECTORS ARE BACKED BY OUR 2 YEAR UNLIMITED MILE WARRANTY!! APPLICATIONS WITH TOP-FEED FUEL RAIL: Toyota Supra with 2JZ-GTE Lexus GS300/ Toyota Aristo V300 with 2JZ-GTE Engine Injector specs: Static Flow Rate @ 43.5PSI (300 KPa) = 95 lb/hr / 12.0 gm/sec / 1000cc/min Coil Resistance: 12 Ohms / High Impedance / Saturated E85/ALCOHOL COMPATIBLE Cone Spray Angle - single spray cone. Approximate cone angle for 90% of spray volume10.5-11mm Inlet Diameter Factory fitted with Viton upper and lower o-ringsCIean Injection CI1000 Series Bosch ev14 1000cc Fuel Injectors to 2JZGTE engine with topfeed fuel rail. Clean Injection CI1000 Series injectors are Bosch Motorsport base injectors. Designed to suit 2JZ engine with top-feed fuel rail setup. Will fit fuel rails such as HKS, Greddy, or similar with 11mm/10.5mm fuel rail injector ports. Injectors will also come with plug and play connector adapters which allows the injectors to plug right into the factory injector harness. Clean Injection CI1000 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. INJECTOR FEATURES:Flow Matched Sets within ≤ 1% Static and Dynamic flow ratesFull Injector Latency Data ProvidedTunable to factory Rock solid IdleExcellent Fuel AtomizationDirect Plug and Play FitFast Response timeConsistent performance all the way to 7 BAR2 Year Unlimited Mile WarrantyStainless Steel Internals Compatible with all known race fuels including E85 Vehicle Compatibility Guide: Toyota Supra with 2JZ-GTELexus GS300/ Toyota Aristo V300 with 2JZ-GTE Engine INJECTOR SPECS: Static Flow Rate (gasoline) 1000cc@ 43.5PSI Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers) Spray Pattern: Wide 30 degree mist (single orifice) Electrical Connector: USCAR Fitted with Viton o-rings 60MM Length with 11mm fuel rail orings. LISTING INCLUDE:6pcs CI1000 SERIES BOSCH 1000cc fuel injectors6pcs obd2 plug and play injector adapters

Price: 489.99 USD

Location: Acworth, Georgia

End Time: 2024-01-28T20:00:03.000Z

Shipping Cost: 0 USD