Teltonika Dual LTE Cat6 Industrial Cellular RouterRutx122X Sim Slot 5X Gigabit

Description: Features:Powerful Dual LTE Cat 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where loosing connection is not an option. Specification:MOBILEMobile module2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 MbpsSIM/mobile module switch2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned)StatusSignal strength, SINR, RSRP, RSRQ, Bytes sent/received, Mobile module in useSMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to TTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned)Black/White listOperator black/white listMultiple PDN (planed)Possibility to use different PDNs for multiple network access and servicesBand managementBand lock, Used band status displayAPNAuto APNBridge modeDirect connection (bridge) between mobile ISP and device on LANWIRELESSWireless mode802.11b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)WiFi securityWPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separationESSIDESSID stealth modeWireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing pageETHERNETWANWAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIXBLUETOOTHBluetooth 4.0Bluetooth low energy (LE) for short range communicationNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)NetSnapper (optional)Mobile connection management, data compression VPN client (not available in standard FW)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forwards, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP Relay, RelaydQoSTraffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic FailoverLoad balancingBalance Internet traffic over multiple WAN connectionsSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)SECURITYAutheticationPre-shared key, digital certificates, X.509 certificatesFirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLANPort based and tag based VLAN separationMobile quota controlCustom data limits for both SIM cardsWEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess controlFlexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPNMultiple clients and a server can run simultaneously, 12 encryption methodsOpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCIPsecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)GREGRE tunnelPPTP, L2TPClient/Server instances can run simultaneouslyStunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPNMethod of building scalable IPsec VPNsSSTPSSTP client instance supportMODBUSModbus TCP slaveID filtering: Respond to one ID in range [1;255] or anyAllow remote access: Allow access through WANCustom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionalityModbus TCP masterSupported functions: 01, 02, 03, 04, 05, 06, 15, 16Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)MQTT gatewayGateway Allows sending commands and receiving data from Modbus Master trough MQTT brokerModbus data to serverProtocols HTTP(S), MQTT, Azure MQTT (planned)MONITORING & MANAGEMENTWEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notificationSSHSSH (v1, v2)SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GETCALLReboot, Status, Mobile data on/off, Output on/offTR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTTMQTT Broker, MQTT publisherSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTP/HTTPSModbusModbus TCP status/controlRMSTeltonika Remote Management System (RMS)IoT PLATFORMSClouds of thingsAllows monitoring of: Device data, Mobile data, Network info, AvailabilityThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IPAzure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub serverSYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717 MHzRAM256 MB, DDR3FLASH memory256 MB FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devices at onceKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment providedLOCATION TRACKINGGNSSGPS, GLONASS, BeiDou, Galileo and QZSSCoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMSNMEANMEA 0183Server softwareSupported server software: TAVL, RMSMobile Network GeolocationGet approximate device location on RMS based on mobile cell tower position (without using GPS)GeofencingConfigurable multiple geofence zonesUSBData rateUSB 2.0ApplicationsSamba share, custom scripts (planned)External devicesPossibility to connect external HDD, flash drive, additional modem, printer (planned)Storage formatsFAT, FAT32, NTFSINPUT/OUTPUTInput1x Digital InputOutput1x Digital OutputEventsSMS, Email, RMSPOWERConnector4 pin industrial DC power socketInput voltage range9 – 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af and 802.3at standardsPower consumptionIdle: <4 W, Max: <22 WPHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)Ethernet5 x RJ45 ports, 10/100/1000 MbpsI/Os1 Digital Input, 1 Digital Output on 4 pin power connectorStatus LEDs6 x connection status LEDs, 6 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDsSIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holdersPower4 pin DC connectorAntennas4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNSUSBUSB A port for external devicesResetReboot/User default reset/Factory reset buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions (W x H x D)132 x 44 x 95 mmWeight540 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10 % to 90 % non-condensingStandart package containsRUTX124 x LTE antennas (swivel, SMA male)2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m)1 x GNSS antenna (adhesive, SMA male, 3 m cable)1 x Bluetooth antenna (magnetic mount, RP-SMA male, 1.5 m)SIM needle24 W Euro PSUEthernet cable (1.5 m)QSG (Quick Start Guide)Packaging box

Price: 648.35 USD

Location: European Union

End Time: 2024-11-07T11:41:14.000Z

Shipping Cost: 0 USD