Description: Features:Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.Specification:MOBILEMobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 MbpsSIM switch (planed): 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protectionStatus: Signal strength, SINR, RSRP, RSRQ, Bytes sent/receivedSMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET (planed), EMAIL to SMS (planed), SMS to Email (planed), SMS to HTTP (planed), SMS to SMS (planed), scheduled SMS (planed), SMS autoreply (planed), SMPP (planed)Black/White list: Operator black/white listMultiple PDN (planed): Possibility to use different PDNs for multiple network access and servicesBand management: Band lock, Used band status displayWIRELESSWireless mode: 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)WiFi security: WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separationESSID: ESSID stealth modeETHERNETWAN: 1 x WAN port (can be configured to LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN: 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverBLUETOOTHBluetooth LE: Bluetooth low energy (LE) for short range communicationNETWORKRouting: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW)Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMNP, MQTTVoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewall: Port forwards, traffic rules, custom rulesDHCP: Static and dynamic IP allocation, DHCP Relay, RelaydQoS: Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNS: Supported >25 service providers, others can be configured manuallyNetwork backup: VRRP (planed), Mobile and Wired WAN options, each of which can be used as backup, using automatic FailoverLoad balancing: Balance your Internet traffic over multiple WAN connectionsSSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)SECURITYAuthetication: Pre-shared key, digital certificates, X.509 certificatesFirewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLAN: Port based and tag based VLAN separationMobile quota control: Set up custom data limits for both SIM cardsWEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites onlyAccess control: Flexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methodsOpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCIPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)GRE: GRE tunnelPPTP, L2TP: Client/Server services can run simultaneouslyStunnel (planed): Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPN: Method of building scalable IPsec VPNsMONITORING & MANAGEMENTWEB UI: HTTP, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel logFOTA: Firmware update from server, automatic notificationSSH: SSH (v1, v2)SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GETTR-069 (planed): OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemSNMP: SNMP (v1, v2, v3), SNMP trapJSON-RPC: Management API over HTTP/HTTPSModbus (planed): Modbus TCP status/control, master and slave modesMQTT: MQTT Broker, MQTT publisherRMS: Teltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPU: Quad-core ARM Cortex A7, 717 MHzRAM: 256 MB, DDR3FLASH memory: 256 MB SPI FlashFIRMWARE / CONFIGURATIONWEB UI: Update FW from file, check FW on server, configuration profiles, configuration backupFOTA: Update FW/configuration from serverRMS: Update FW/configuration for multiple devicesKeep settings: Update FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating system: RutOS (OpenWrt based Linux OS)Supported languages: Busybox shell, Lua, C, C++Development tools: SDK package with build environment provided (planed)LOCATION TRACKINGGNSS: GPS, GLONASS, BeiDou, Galileo and QZSSCoordinates: GNSS coordinates via WebUI, SMS, TAVL, RMSNMEA: NMEA 0183Server software: Supported server software: TAVL, RMSMobile Network Geolocation: Get approximate device location on RMS based on mobile cell tower position (without using GPS)Geofencing: Configurable multiple geofence zonesUSBData rate: USB 2.0Applications: Samba share (planed), custom scripts (planed)External devices: Possibility to connect external HDD, flash drive, additional modem, printerStorage formats: FAT, FAT32, NTFSINPUT/OUTPUTInput: 1 x Digital InputOutput: 1 x Digital OutputEvents: SMS, Email, RMSPOWERConnector: 4 pin industrial DC power socketInput voltage range: 9 – 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standardsPower consumption: 11 W MaxPHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)Ethernet: 4 x RJ45 ports, 10/100/1000 MbpsI/Os: 1 Digital Input, 1 Digital Output on 4 pin power connectorStatus LEDs: 3 x connection status LEDs, 5 x connection strength LEDs, 8 x LAN status LEDs, 3 x WAN status LEDs, 1 x Power LEDSIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holdersPower: 4 pin DC connectorAntennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNSUSB: USB A port for external devicesReset: Factory reset buttonPHYSICAL SPECIFICATIONCasing material: Full aluminium housingDimensions: 115 mm x 95 mm x 44 mm (H x W x D)Weight: 456 gMounting options: DIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature: -40 C to 75 COperating humidity: 10 % to 90 % non-condensingIngress Protection Rating: IP30Standard package containsRouter RUTX11PSU2 x LTE antennas (swivel, SMA male)2 x WiFi antennas (swivel, RP-SMA male)1 x GNSS antenna (adhesive, SMA Male)1 x Bluetooth antenna (magnetic, RP-SMA male)Ethernet cable (1.5 m)QSG (Quick Start Guide)Packaging box
Price: 496.97 USD
Location: European Union
End Time: 2024-12-28T19:53:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Model: RUTX11
Country/Region of Manufacture: Lithuania
Custom Bundle: No
MPN: RUTX11
Brand: Teltonika
Type: Wireless Router