Description: Up for sale is the vintage Technics SA-600 stereo receiver with LED upgrades. Cosmetically, it is in fair condition. The face plate is clean except for a large scratch above the "SA-600" text on the left side (Pics #1, 3, 4, and 5). The knobs and switches are clean. However, the wood veneer has a lot of scratches and dents on all three sides (Pics #7, 8, 9 and 10). Please refer to the pictures for all the cosmetic details. Functionally, it is working. All bulbs were replaced with warm white LEDs. The receiver has been cleaned inside with all the pots cleaned and lubricated with DeOxit Fader and the switches with DeOxit Gold to eliminate noises. All inputs were tested and working, including the phono input. Both AM and FM were tested and working. Both speaker outputs were tested and good sound output was observed. The receiver will be double-boxed with fitted foam and shipped via FedEx Ground. I have not pack it yet so will charge $150 for shipping and will provide refund for any extra leftover once shipping cost is confirmed. SpecificationsTuning range: FM, MWPower output: 70 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.04%Damping factor: 50Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 78dB (MM), 95dB (line)Output: 150mV (line)Speaker load impedance: 4Ω to 16ΩDimensions: 486 x 157 x 329mmWeight: 12.6kg
Price: 549 USD
Location: San Diego, California
End Time: 2024-10-01T08:57:00.000Z
Shipping Cost: 150 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Technics
Model: SA-600
Country/Region of Manufacture: Japan
