Description: Now available, the TX22 Care Pack! Everything you need for your TX22 (standard model) Included is our TX22 Recoil Spring Washer - INSTANTLY STOPS RECOIL SPRING DAMAGE! No need to spend too much money on some heavy aftermarket recoil spring assembly that might not have the correct tension or will damage your slide and frame with its metal guide rod...keep and use your original factory recoil spring assembly! Simply install this TX22 Recoil Spring Washer and instantly STOP the damage to your slide caused by that sharp front edge on the spring. Absolutely no more metal-to-metal contact between the spring and the slide! A perfect fit onto the original Taurus TX22 factory recoil spring and into the forward recessed area where the spring seats. An added benefit is that it keeps the spring a bit more tensioned, which holds the slide firmly forward into battery, all without adding any additional stress to the slide or frame like heavy stainless steel replacement guide rods can do. Our Recoil Spring Washer also helps to stop the slide from going too far back and hitting/damaging the frame. This has been thoroughly tested over thousands of rounds to ensure there's no interference with slide cycling or slide stop function at all. This fits the standard TX22 (non-competition model) and INSTALLS IN JUST SECONDS, instruction sheet posted in product photos above. This proprietary Onyx material is stronger than any other buffer on the market. It's extremely durable and can withstand 71MPa of force (that's 10,000 psi) and 145°C temperatures (293°F) Made 100% here in the USA. Also included is our Striker Block Spring - Stainless steel striker block spring for the Taurus TX22, replaces part #46 on the standard TX22, part #20 on the TX22 Competition Model. Taurus wants you to send in your entire pistol, just to replace this spring! There's no reason to have your gun in service for weeks or even months for a job that only takes you a minute to complete. Drop this in and go! If you're looking for a slightly stronger spring that snaps securely onto the Striker Block, check our TX22 STRIKER BLOCK SPRING +POWER listing, sold separately. And we include a set of Frame Pins - Set of 4 Frame Pins for the Taurus TX22. If you've lost one or more of your pins or just want some for backups, here is a set of 4 pins that are the exact same length, width and taper as the factory original. These are coiled spring pins, exactly the same style as what originally came with the TX22 and not some cheap generic 'roll pins' other companies sell that will ruin your frame. Take a close look, ours are exactly the same as the originals. We've measured and tested these pins multiple times and we use them on our own TX22 pistol. They are an exact fit, however, of course, we are not responsible for improper removal and installation of the pins. A correctly sized gunsmithing punch should be used at all times to both remove and install pins. Never bang a hammer directly onto any pin. These coiled spring pins are for the frame only. TX22 CARE PACK, ORDER YOURS TODAY!
Price: 15 USD
Location: Gilbert, Arizona
End Time: 2024-09-08T20:34:51.000Z
Shipping Cost: 3.43 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Model: Taurus TX22
