Tamiya Yamaha YZR500 Decals (Repro)

Description: Tamiya Yamaha YZR500 Decals (Repro) - Water Decals Scale : 1/12__________________________________________________________________________________________________________________ Shipping:We have started shipping from multiple location (Australia & India). Our decal sets are normally developed in conjunction with actual hobbyists and peer-reviewed prior to release. The decals are printed on a high-quality, high-resolution (720 x 1440dpi) 8-ink commercial digital printer (**NOT ALPS**)(**NOT LASER**). There is no pixellation or dot-matrix effect. The decal film is resilient and easy-to-handle and position. Prior to 25/01/19 all waterslide decals we shipped were (a) printed on continuous carrier; and (b) then had the decal film pre-cut ~0.5mm outside each item of artwork. Based on ongoing client feedback and requests, as of 25/01/19 we have discontinued pre-cutting of stock decals sold via eBay. Existing stock of pre-cut decals will continue to be provided until those stocks are exhausted. If you would still like decals that are Pre-Cut: please ask us! If you would like a product that is not currently listed: please ask us! 1. Decal Instructions Custom Hobby Decals uses a 4th generation premium decal film that is very resilient and resistant to damage when handling. It is easy-to-handle, position and fix in place. Our previous media (generations 1 to 3) was very optimised for our pre-cut process. As such, whilst it was still a 'quick release film', the decal media would not easily slip-off the backing media like 'traditional' waterslide media. Our 4th Gen film retains all of the positive features of previous generations, but a revised adhesive allows Hobbyists to use either the process outlined below, or instead use it as per 'traditional' media. (As of 25/01/19, waterslide decals will no longer be pre-cut and therefore only 'traditional' or commonly-used methods for handling decals will apply) Particularly when dealing with small to very small decals, we normally recommend the following process:place section of media in water for a slow count of 5 (if left too long in the water, the decal film will likely separate from the backing sheet)remove from water and shake to remove any excess;use a pair of fine-nose tweezers, pick the edge of a decal - where we have pre-cut the decal film - to gently lift the decal from the backing media.with a little water on the receiving surface, position the decals as required. Add more water if further movement is required. (Some people prefer to use decals setting solution instead of water. Both techniques are normally quite reliable and it is therefore likely a matter of preference rather than ?best technique?.)once positioned, use the edge / corner of a tissue to wick away any excess water;apply decal setting solution and leave for 1 - 5 minutes.We generally recommend Gunze 'Mr Mark Setter' and 'Mr Mark Softer' (our personal choice). Tamiya 'Mark Fix' and Microscale 'Micro Sol' and 'Micro Set' have also tested as quite effective. Not all waterslide decal media has the same composition and certain decal setting solutions are designed for other media. As such, they are quite ineffective with our waterslide media. You should therefore always test for compatibility if choosing to use another brand to those referenced above. allow the decal setting solution some time to react with the decal film;once a decal has been treated with decal setting solution, do -not- attempt to move or re-position it, as damage may result.again use the edge / corner of a tissue to wick away any excess solution;use a balled-up tissue to gently but firmly press the decal onto the surface to both remove air bubbles and to promote conformance to a non-flat surface;allow to dry, then apply a suitable clear-coat.Our decals have been successfully tested with most clear-coat solutions currently available. The specific exception to this is any solvent-based product, such as 2-pack automotive. Such products will damage or destroy our decals as they are printed using solvent-based inks. As mentioned, you will find our deals offer considerable resistance to damage but are _very_ conformable when correctly treated with decal setting solution.Please do not hesitate to contact us immediately should you have any questions regarding the above, or any other matter concerning our decals or services. 2. Pre-cut Decal Film Most decals purchased today have been printed on "continuous carrier" decal media. This means that the decal film is one piece and covers the entire sheet of backing media. Our decals are first printed on continuous carrier decal media. Once the ink has cured, we then cut the decal film (not the backing media), at typically around 0.5mm ? 0.7mm outside of the decal artwork. This means that you can quickly and easily remove just the actual decal from the backing media without having to first closely trim it to size - a significant saving in time and effort ... ... and without the worry about perhaps damaging the decal artwork! Our cutting process is around 99% accurate - on the odd occasion the start and finish of the outline cut won't quite overlap. If this occurs, just a small reasonable amount of care will produce still produce the expected results. Based on ongoing client feedback and requests, as of 25/01/19 we have discontinued pre-cutting of stock decals sold via eBay. Existing stock of pre-cut decals will continue to be provided until those stocks are exhausted. If you would still like decals that are Pre-Cut: please ask us! 3. Illustrative Image of Decal Sheet Images of our decal sheets in this listing (and other) incorporate a typically green or pink background to enable easy viewing of white and light-coloured artwork. This is not the colour of our actual waterslide decals which, unless specifically otherwise stated, are printed on clear decal film on a white or pale colour backing media. As appropriate to the product concerned, vinyl decals may be printed on clear 50 micron vinyl; white 70 micron vinyl; metallic gold vinyl; 100 micron 'reflective' vinyl, etc. 4. CHD Overview It is the aim of Custom Hobby Decals to become the leading supplier of custom waterslide decals, both in Australia and worldwide. We specialize in low-volume printing (from as little as one "Very Small" sheet of decals, being less than 10% of A4 area) for Hobbyists, Retailers, OEM manufacturers and commercial businesses. In addition to waterslide decals, we also print high-quality vinyl decals. And the occasional painting Stencil. It is our intent to add paper-based flags and banners by mid-2019. We also provide "print-only" services for Clients with ready-to-print artwork* or we can prepare artwork to meet any specification (and then print it for you). Pricing for artwork preparation, by experienced graphic artists, is affordable and (generally) quickly available.For artwork preparation, we can work from photos, sketches, drawings, a text description, pictures (eg JPG, BMP, etc), or other ???Ready-to-print artwork is normally preferred in vector-graphic format (eg AI, CDR, EPS, vector-PDF, SVG, DXF/DWG);Artwork in raster-image file formats (eg JPG, BMP, PSD, non-vector-PDF, etc) can sometimes be directly used without any conversion process or artwork manipulation;We print from 'barely there' translucent to 'full opaque' decals in 1440 x 720 dpi high-resolution, using an 8-ink process (printer-dependent: either "CMYK + Light Black, Orange, White and Silver" or "CMYK + Light Cyan, Light Magenta, White and Metallic" inks). For any other decals that you may require: please ask us! 5. Packaging for Decal Sheets Decal sheets are normally packaged in resealable cellophane bags and then placed in an appropriately sized (C5 or B4) rigid cardboard envelope for mailing. Marked "Do Not Fold", the rigid cardboard envelope provides a significant level of protection against many types of damage to decal sheets. 6. Postage: Insurance and Tracking We normally ship Australia-wide via Priority Post, for (supposedly) 2-3 business day delivery(instead of the now seemingly standard 6-10+ business days for ordinary mail). Unless specifically requested, we ship internationally via standard International AirMail.Australia Post (and other postal authorities) quote a typical delivery time of "approx 6-10 business days" for delivery. Whilst we have occasionally had reports of quicker delivery, most shipments are delivered within that timeframe. We have however had reports of shipments taking 15+ business days. Please note that once we ship an item, we are not responsible for, and can not be held accountable for, the actual delivery time taken. That responsibility and liability reposes with the carrier. Please also note that Tracking, Insurance and/or Signature-on-Delivery --NOT-- available with Priority Post or standard International AirMail. Should you desire any of those services, you need to contact us for a higher-cost delivery option.Once the product has been shipped (eg envelope photographed as postmarked by AusPost, or has been marked in eBay as 'shipped'), we do not and cannot accept any liability for product that is not delivered.If you are not happy with this condition, please select a higher-cost postage options that includes Tracking, Insurance and/or Signature-on-Delivery. (Insurance is only available when indicated by Australia Post for the postage option selected) 7. Warranty: Refunds, Repairs & Returns We fully comply with our obligations under Australian Consumer Law and all Rights for 'repair, return or refund provided therein. In general:We will replace any item that was not printed correctly or that was otherwise damaged prior to shipment; We are not liable for products damaged by Clients (eg by the use of solvent-based clear-coat solutions); We are not actually liable for items damaged in-transit: that is (or should be) the responsibility of the carrier and/or shipping insurance (if applicable); (but contact us anyway and we'll try to work something out for you).Once payment is complete: exchange, replacement or return of product is at our sole discretion.(A fee may apply to any such transaction to cover our handling costs) You must contact us first in regard to any request for Refund, Return or Replacement:any item sent for return must be undamaged and accompanied by all original packaging and a valid RA (Return Authorisation) number issued by DecalBiz Pty Ltd; Shipping, Postage, PP&H and any associated fees & charges are not refundable; Client is responsible for return shipping; A shipping Tracking Number must be provided for all products returned for Refund, Repair or Replacement, to assist with confirmation that the product has been returned;We are not liable for Refund, Return or Replacement of product due to "buyer's remorse" or any oversight, error, etc by the client when placing an Order. (That said, if you've got a problem ... try contacting us anyway: we are open to assisting any case of genuine hardship)._____________________________________________________________________________________________________________________________________ IF YOU WISH TO BUY MORE THAN ONE DIFFERENT DECAL SET, THEN PLEASE USE THE "ADD TO CART" BUTTON ... AND NOT THE "BUY NOW" BUTTON.If you use "BUY NOW" you will place multiple separate Orders and you will be charged Shipping on each Order placed._____________________________________________________________________________________________________________________________________ CHD eBay Terms of Trade… and Other Information About Us 1. Custom & OEM Decals 2. Other Scales 3. Custom Colours 4. Brand Names & Copyright 5. Illustrative Image(s) for eBay Listing 6. Packaging of Decal Sheets for Shipment 7. PP&H, Tracking, Insurance & Signature-On-Delivery 8. Warranty: Refunds, Repairs and Replacement About CHD A. About Custom Hobby DecalsB. Media: Waterslide, Vinyl and OtherC. Printers and Printing How-To Instructions (Waterslide) __________________________________________________________________________________________________________________ Please do not hesitate to ask about availability in additional scales or colours! __________________________________________________________________________________________________________________ 1. Custom and OEM Decals As per our name, Custom Hobby Decals offers Hobbyists the opportunity to order full custom decals, not just our stock decals available via eBay and retail outlets. We provide both full design-and-print and print-only services, starting from a single decal sheet. CHD does not intend to be the cheapest supplier of custom print decals (we do not use ALPS or Oki / Uninet CMYW laser printers), as we provide a high resolution (900 x 900dpi or 720 x 1440 dpi), high-quality product that is printed on the premium waterslide or vinyl media … including the ability to print both translucent and fully-opaque WHITE. We also provide the ability to print METALLIC colours (eg Bright Silver, Flat Silver, Gold, …). Custom products may attract charges for (i) an Artwork Admin fee; and / or (ii) a Custom Print fee. PP&H charges also apply as per our standard rates. Please note: * Once custom artwork has been prepared and approved by the Client, NO refunds are available on that component. * Once the artwork is printed, NO refunds are available on that component. * Once the custom product is shipped, NO refunds are available on PP&H.2. Other Scales We initially released our decal sets in those scales we believe Hobbyists will be most interested in. That said, we are normally happy to make our products available in any scale required. If you do not see the product you require available on the scale you require: PLEASE ASK! 3. Custom Colours CHD offers the option of [CUSTOM COLOUR' in many products, to allow you to specify a non-standard colour scheme. The ability to order a CUSTOM COLOUR attracts an additional cost (listed in the price offered) as we have to update artwork and then run a CUSTOM PRINT-RUN to produce those decals. Note: Conditions applyCUSTOM decals are non-refundable and, whilst we do our best to provide the particular colour requested, our selection of colour is final once the decals are printed. 4. Brand Names & CopyrightCertain of our decals may contain Brand Names and/or Trademarks (eg "FORD", "KENWORTH", "MACK", etc) which remain the property of their respective existing owners. Their inclusion does not imply or otherwise convey a relationship between CHD and those entities.Such items are reproduced with our decal sets purely to enable the Hobbyist to restore existing licenced markings when repainting or restoring models. Decals of such markings may not be used for other purposes. 5. Illustrative Image(s) for eBay ListingsImages of our decal sheets in this listing (and other) incorporate a typically green or pink background to enable easy viewing of white and light-coloured artwork. This is not the colour of our actual waterslide decals which, unless specifically otherwise stated, are printed on clear decal film on a white or pale colour backing media.As appropriate to the product concerned, vinyl decals may be printed on clear 50-micron vinyl; white 70-micron vinyl; metallic gold vinyl; 100 microns 'reflective' vinyl, etc. 6. Packaging of Decal Sheets for Shipment Decal sheets are normally packaged in resealable cellophane bags and then placed in an appropriately sized (C5 or B4) rigid cardboard envelope for mailing.Marked "Do Not Fold", the rigid cardboard envelope provides a significant level of protection against many types of damage to decal sheets. We will not ship decal products in flimsy paper envelopes in an attempt to save on PP&H cost. Ultimately, it is a false economy: with or without a cardboard insert, we had too many complaints about products being damaged. 7. PP&H, Tracking, Insurance and Signature-On-Delivery Please note that we do not consolidate multiple Orders ... nor do we refund multiple shipping charges. If you place multiple Orders for 2 or more of our products, we are required to ship them as separate Orders. If you wish to order 2 or more different decal products, then you should use eBay's "ADD TO CART" button ... and not the "BUY NOW" button. __________________________________________ There is a belief by some that "postage" is somehow the cost of stamps only and that we should use a flimsy paper envelope to ship our products. There are however multiple costs that go into "PP&H" (Post, Pack & Handling). Some of these costs include the eBay and PayPal fees we pay on the PP&H charged, the heavy card envelopes we use, the resealable cellophane wrappers that protect against moisture, the minimum cost of $2.70 in stamps, … We use the higher cost Priority Post as standard within Australia after AusPost started taking 6-10 business days (or more) to deliver standard mail … and (unsurprisingly) clients complained. And, the last time I checked, if we were to use eBay Services for PP&H, the minimum cost to us by eBay was $8.40 ... before we add mailer, cellophane, our time, etc. So we actually provide MORE and a LOWER cost. Custom Hobby Decals provides a premium product that we intend will be delivered in a timely manner, in good condition, ready to be immediately used._ _ _ _ _ _ _ _ _ _ _ As standard, we ship Australia-wide via Priority Post for (usually) delivery within 2-3 business days (instead of the now seemingly standard 6-10+ business days for ordinary mail). Unless specifically requested otherwise, we ship internationally via standard international AirMail … which does NOT include Tracking, Insurance or Signature-on-Delivery. Australia Post (and other postal authorities) quote a typical delivery time of "approx. 6-10 business days for delivery to most countries. Whilst we have had reports of a quicker delivery, most shipments arrive within that timeframe. Some do not, taking 10-15 business days. Very occasionally more. (the record is currently 3 months) * Please note that once we ship an item, we are not responsible for, and can not be held accountable for, the actual delivery time is taken. That responsibility and liability actually reposes with the carrier. * Please also note that Tracking, Insurance and Signature-on-Delivery are -- NOT -- offered or available for Priority Post within Australia or for shipments via standard international AirMail. These facilities are available, however … as an extra cost item. Should you desire any of these facilities, please contact us prior to placing your order. Once an order has been shipped (eg envelope photographed after being postmarked by AusPost ... and/or has been marked in eBay as 'shipped'), we do not and cannot accept any liability for the product(s) that are not delivered. That responsibility and liability actually reposes with the carrier. If you are not happy with this condition, please select a higher-cost postage option that includes Tracking, Insurance and/or Signature-on-Delivery. Insurance is only available when indicated by Australia Post for the postage option selected). 8. Warranty: Refunds Repairs & Replacement We fully comply with our obligations under Australian Consumer Law, and all Rights for 'repair, return or refund' provided therein.In general: • We will replace any item that was not printed correctly or that was otherwise damaged prior to shipment; • We are not liable for products damaged by Clients (eg by the use of solvent-based clear-coat solutions); • We are not actually liable for items damaged in-transit: that is (or should be) the responsibility of the carrier and/or shipping insurance (if applicable); (but contact us anyway and we'll try to work something out for you).Once payment is complete: exchange, replacement or return of product is at our sole discretion. (A fee may apply to any such transaction to cover our handling costs)You must contact us first in regard to any request for Refund, Return or Replacement: • any item sent for return must be undamaged and accompanied by all original packaging and a valid RA (Return Authorisation) number issued by DecalBiz Pty Ltd (T/A Custom Hobby Decals); • Shipping, Postage, PP&H and any associated fees & charges are not refundable; • The Customer is responsible for return shipping; • A shipping Tracking Number must be provided for all products returned for Refund, Repair or Replacement, to assist with confirmation that the product has been returned; We are not liable for Refund, Return or Replacement of product due to "buyer's remorse" or any oversight, error, mis-judgement, etc by the Customer when placing an Order.(That said, if you've got a problem ... try contacting us anyway: we are open to assisting any case of genuine hardship). _________________________________________________________________________________________________________________ A. ABOUT CUSTOM HOBBY DECALS It is the aim of Custom Hobby Decals to become the leading supplier of custom waterslide decals, both in Australia and worldwide.We specialize in low-volume printing (from as little as one "Very Small" sheet of decals, being less than 10% of A4 area) for Hobbyists, Retailers, OEM manufacturers and commercial businesses.In addition to waterslide decals, we also print high-quality vinyl decals. And the occasional painting Stencil.We also provide "print-only" services for Clients with ready-to-print artwork* or we can prepare artwork to meet any specification (and then print it for you).Pricing for artwork preparation, by experienced graphic artists, is affordable and (generally) quickly available.For artwork preparation, we can work from photos, sketches, drawings, a text description, pictures (eg JPG, BMP, etc), or other ???Ready-to-print artwork is normally preferred in vector-graphic format (eg AI, CDR, EPS, vector-PDF, SVG, DXF/DWG);Artwork in raster-image file formats (eg JPG, BMP, PSD, non-vector-PDF, etc) can sometimes be directly used without any conversion process or artwork manipulation;We print from 'barely there' translucent to 'full opaque' decals in 1440 x 720 dpi high-resolution, using an 8-ink process (printer-dependent: either "CMYK + Light Black, Light Cyan, Light Magenta and WHITE" inks @ 900 x 900dpi, or "CMYK + Light Cyan, Light Magenta, White and Metallic" inks at 720 x 1440dpi).For any other decals that you may require: please ask us! B. Media: Waterslide, Vinyl and Other Types of Media We UseCustom Hobby Decals a range of different media for its various products. These include: * Waterslide Premium Plus 18 micron Clear White backing-sheet Suitable for most decals. Difficult to damage. * Waterslide Premium 18 micron Clear Blue backing-sheet Preferred for white or predominantly white decals * Vinyl Premium Plus 32 micron Clear White backing-sheet Thin, very conformable ... but can be damaged by indelicate handling and stretching * Vinyl Premium 50 micron Clear White backing-sheet Thin, conformable ... not as good overall as 32 microns, but more robust ('limited availability' as this is no longer our standard product) * Vinyl Premium 70 micron White White backing-sheet Thin, reasonable conformable, very high optical density (ie opaque), good for vibrant colours or solid-white decals * Gold Premium Plus 23 micron Reflective Gold Mylar Ideal for certain applications requiring a reflective gold finish * Silver Premium Plus 23 micron Reflective Silver Mylar Ideal for certain applications requiring a reflective silver finish * Stencil 100+ micron Blue Thick, resilient and reusable if handled properly. Designed for stencil painting applications * Reflective 100+ micron Pearlescent Reflective Suitable for signage, etc requiring a 'Reflective Vinyl' finish C. Printers & Printing CHD currently operations 2 commercial wide-format printers from a very reputable manufacturer. We do NOT print our decals using: * ALPS printer (Only 600 x 600dpi print plus the high likelihood of pixelation and lack of colour definition) * Office Inkjet printer (Translucent colours only on clear media. No White. Must be sealed before placing in water) * OKI CMYW Laser printer (Only 600 x 600dpi print plus no K = Black Toner cartridge == > can be 'not great' quality print with 'dark muddy-brown' colour for black) * Uninet CMYW Laser printer (Only 600 x 600dpi print plus no K = Black Toner cartridge == > can be 'not great' quality print with 'dark muddy-brown' colour for black) One of our printers is designed more for faster production work, providing high quality, high-resolution print (900 x 900dpi), using CMYK + Light Cyan, Light Magenta, Light Black and WHITE inks.Our second printer is a more specialised unit, again providing high quality, high-resolution print (720 x 1440dpi), using CMYK, Light Cyan, Light Magenta, WHITE and METALLIC inks PRE-CUT DECALSMost of our decals are supplied with the decal film pre-cut, typically 0.5mm outside of the artwork. This provides decals that are easier-to-use and generally provide a better finish on the model. D. HOW-TO Instructions: Waterslide Decals Custom Hobby Decals uses a 4th generation premium decal film that is very resilient and resistant to damage when handling. It is easy-to-handle, position and fixes in place.Our previous media (generations 1 to 3) was very optimised for our pre-cut process. As such, whilst it was still a 'quick release film', the decal media would not easily slip-off the backing media like 'traditional' waterslide media.Our 4th Gen film retains all of the positive features of previous generations, but a revised adhesive allows Hobbyists to use either the process outlined below, or instead use it as per 'traditional' media. Particularly when dealing with small to very small decals, we normally recommend the following process:place section of media in water for a slow count of 5 (if left too long in the water, the decal film will likely separate from the backing sheet ... and lack adhesion when placed on the model)remove from water and shake to remove any excess;use a pair of fine-nose tweezers, pick the edge of a decal - where we have pre-cut the decal film - to gently lift the decal from the backing media.with a little water on the receiving surface, position the decals as required. Add more water if the further movement is required. (Some people prefer to use decals setting solution instead of water. Both techniques are normally quite reliable and it is therefore likely a matter of preference rather than? best technique?.)once positioned, use the edge/corner of tissue to wick away any excess water;apply decal setting solution and leave for 1 - 5 minutes.We generally recommend Gunze 'Mr Mark Setter' and 'Mr Mark Softer'. Tamiya 'Mark Soft' & 'Mark Fix' and Microscale 'Micro Sol' & 'Micro Set' have also tested as quite effective. Not all waterslide decal media has the same composition and certain decal setting solutions are designed for other media. As such, they are quite ineffective with our waterslide media. You should therefore always test for compatibility if choosing to use another brand to those referenced above.allow the decal setting solution some time to react with the decal film;once a decal has been treated with decal setting solution, do -not- attempt to move or reposition it, as damage may result.again use the edge/corner of tissue to wick away any excess solution;use a balled-up tissue to gently but firmly press the decal onto the surface to both remove air bubbles and to promote conformance to a non-flat surface;allow to dry, then apply a suitable clear-coat.Our decals have been successfully tested with most clear-coat solutions currently available.The specific exception to this is any solvent-based product, such as 2-pack automotive. Such products will damage or destroy our decals as they are printed using solvent-based inks. As mentioned, you will find our deals offer considerable resistance to damage but are _very_ conformable when correctly treated with decal setting solution. Please do not hesitate to contact us immediately should you have any questions regarding the above, or any other matter concerning our decals or services.

Price: 14.9 AUD

Location: India

End Time: 2023-09-09T09:21:32.000Z

Shipping Cost: 14.57 AUD