Description: This impressive device represents the pinnacle of technology and power in amplifiers today. A true marvel, capable of violently powering your entire sound system, plus the tuning capability provided by a Digital Signal Processor. All in one place. Class D Full Range, with 225 watts RMS @ 4 ohms in each of its four channels, plus a 6-channel Integrated Digital Signal Processor. Included Dual function External control: remote control of output channels 3 and 4, and instant access to 6 different settings in memory. Small in size, easy to install and hide in any corner, while its tremendous power will not go unnoticed. This is a small but really powerful 4-channel amplifier, capable of powering a complete sound system. 225 watts RMS x 4 channels @ 4 ohms, before 1% distortion. - Features: - 225 Watts RMS x 4 @ 4 Ohms; 360 Watts RMS x 4 @ 2 Ohms; 720 Watts RMS x 2 @ 4 Ohms (double bridge) @ Input voltage 13.8 Volts. - Minimum working impedance per channel: 2 ohms. In bridge configuration: 4 ohms. It can be configured in double bridge. - Low (RCA) and High (speaker level) inputs. - Automatic turn-on circuit when using High-level Inputs. - Remote-out, allows to automatically turn on a second amplifier. - 6 fully configurable input channels with the capability of adding channels, useful to get a full range signal from factory systems with electronic filters. - Two RCA-level output channels that can be used to feed a second amplifier, taking advantage of the integrated DSP. These can take their signal from the main input channels or from two totally independent input channels. - Frequency Response: 20 to 40,000 Hertz ± 1 dB, distortion ≤ 0.05% THD + N. - Signal to Noise ≥ 105 dB - Three built-in 40 Amp fuses. - External Remote Control for Output Level adjustment for channels 3 and 4 and selection of 6 adjustment memories (Control and Cable Included). - Dimensions: 12.2 x 7.09 x 1.9 “ Digital Signal Processor (DSP) characteristics: - Adjustment is made via a PC computer with a screen resolution of at least 1280 x 888 pixels. - All adjustments happen in real-time. - 6 input channels that can be configured in any possibility and allow adding signals. High-level or Low-level. - All settings are per channel. - It is possible to temporarily link channels in pairs, to speed up the adjustment process. - For ease of adjustment, it is possible to temporarily mute (MUTE) channels. - High-Pass, Low-Pass, and Band-Pass filters per channel. In the case of subwoofers, a band-pass filter behaves like a normal low-pass plus a subsonic (infrasonic) filter. - Three different filter alignments: Butterworth, Bessel or Linkwitz-Riley. - The cut-off frequency (F3) of each filter can be adjusted from 21 to 19,999 Hertz, 1 Hertz resolution. - The attenuation slope for each filter can be 6, 12, 18, or 24 decibels per octave. - It is possible to invert the output phase of each channel: 0 and 180 degrees. - Independent time delays for each channel, adjustable in milliseconds, centimeters, or inches. - 15 band Parametric Equalizer per channel: Center Frequency, Gain, and Bandwidth (Q) can be adjusted. - The center frequency of each band can be adjusted between 20 and 20,000 Hertz, with a resolution of 1 Hertz. - The gain adjustment range is between -12 to +12 decibels, with a resolution of 0.01 dB. - The bandwidth or Q factor can be adjusted from 0.3 (wide) to 10 (narrow), with a resolution of 0.01.
Price: 745 USD
Location: Houston, Texas
End Time: 2023-11-26T04:16:08.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: SUONO
Model: DSP225.4
MPN: DSP225.4
RMS Power: 225W
Country/Region of Manufacture: China
Channels: 4
California Prop 65 Warning: This product contains chemicals, including lead or lead compounds, that are known to the state of California to cause cancer. and birth defects or other reproductive harm.
