Studio Technologies MODEL-210 Announcer's Console, XLR Inputs and Outputs

Description: The Model 210 Announcer's Console is designed to serve as the audio control center for announcers, commentators, and production talent. The tabletop unit is suited for numerous applications including on-air television sports broadcasting. The Model 210 integrates all on-air, talkback, and cue audio signal routing into one compact system. Ease of use, configuration flexibility, and sonic excellence are some of the unit's highlights. The Model 210 is compatible with most broadcast and audio system environments. Standard connectors are used to interface microphone, headphone, talkback, and IFB signals. Whether it's microphone switching, talkback output, or headphone cue feed, superior audio quality is maintained. A microprocessor provides the Model 210's logic power, allowing exacting control of the unit's operation. A range of configuration choices allow the desired operating parameters to be easily selected. While flexible, the user is presented with an easy-to-use set of controls and indicators. A truly next-generation product, extensive research into the needs and desires of field production personnel was integral to the Model 210's creation. While primarily targeted for on-air television applications, specialized features are included to allow the Model 210 to be used in a variety of other audio applications. These include on-air radio broadcasting, stadium announcement, and voice-over/narration booths.FeaturesMicrophone preamp with selectable gain and 48V phantom powerBroadcast IFB inputTwo pushbutton switches offer programmable "click-free" audio path controlTransformer-balanced main outputLine-level talkback outputSpecificationsGeneral Audio:Frequency Response: 20 Hz-20 kHz, ±0.1 dB, mic in/main outDistortion (THD+N): 0.008%, measured at 1 kHz, mic in/main outS/N Ratio: 80 dB, referenced to –46 dBu mic in/–2 dBu main outConnectors:Mic In, IFB In: 3-pin female XLR-typeMain Out, Talkback Out: 3-pin male XLR-typeHeadphone Out: ¼-inch 3-conductor phone jack24 Vdc Power In: 2.1 x 5.5 mm coaxial power jackSpare Connector Locations: 2, allows one or two Neutrik NC*D-L-1 connectors to be installed (*=3F, 3M, 5F, 5M, 6F, 6FS, etc.)Microphone Input/Preamplifier:Type: electronically balancedInput Impedance: 2 k ohms, nominalGain Range: 20 to 60 dB, nominal, adjustable in 10 dB stepsCompatibility: dynamic or phantom-powered micsPhantom Power: 48 Vdc, nominal, meets IEC 61938Compressor:Threshold: 2 dB above nominal levelAttack/Release Time: 2 mSec/100 mSec, nominalSlope: 5:1, nominalIFB Input:Type: 2-channel, unbalanced (pin 1 common; pin 2 DC with channel 1 audio; pin 3 channel 2 audio)Impedance: 10 k ohms, nominalNominal Level: –10 dBuOptional Line Inputs: 2Type: balanced, transformer-coupledImpedance: 10 k ohms, nominalNominal Level: +4 dBuMain Output:Type: balanced, transformer-coupledNominal Level: –2 dBuMaximum Level: +20 dBu into 2 k ohmsImpedance: 100 ohms, nominalTalkback Output:Type: transformer-coupled with series capacitors and isolation resistorsImpedance: 600 ohms, nominalNominal Level: +4 dBuMaximum Level: +11 dBu (compressor restricts maximum)Headphone Output: 1, binaural (stereo)Compatibility: intended for connection to mono or stereo headphones or headsets with nominal impedance of 100 ohms or greaterType: voltage driverMaximum Output Voltage: 8 Vpp, 150 ohm loadPower Sources:IFB: 24-32 Vdc, 105 mAExternal: 24 Vdc nominal, 70 mA; acceptable range 20-30 Vdc. All units include a universal input/24 Vdc output power supply.Dimensions (Overall):5.6 inches wide (14.2 cm)3.3 inches high (8.4 cm)8.5 inches deep (22.4 cm)Weight: 3.4 pounds (1.6 kg)

Price: 795 USD

Location: Verona, Wisconsin

End Time: 2024-03-16T15:34:34.000Z

Shipping Cost: 0 USD