Stove/Lantern Check Valve Removal Tool fits 200A 220 228 and More, Most Stoves

Description: Coleman Check Valve Removal Tool MADE IN USA Fits 200A 220 222 226 228 plus more models. Will fit most Stoves. Listing is for tool only with 2 Rods and wing nut. Fits most Coleman liquid fuel lanterns and camp stoves, with air stem check valve. General Directions for use: 1.Remove the air stem from your lantern's check valve in order to determine which of the two threaded rods to use (8-32 or ¼-32 thread) 2. Hand screw the rod into the check valve at least finger tight. Engage as much thread as possible. 3. Slide the tube down over the rod. 4. Make sure that the ears are fully engaged in the slot.Gently turn the tube until the ears drop into the slots cut in the check valve. 5. Drop a washer onto the rod and then screw on the wing nut(1/4-20 thread) and tighten just enough to eliminate any play in the tube and lock it into place. Caution: Do not over tighten as the brass threads in the check valve may strip! 6. Using adjustable wrench, fit it to the flats on the exposed end of the tube. 7. Hold the fount in a solid grip. If you have a vise, this is a great application for it. Give the wrench a solid turn counterclockwise. Do not side load the wrench. The check valve will loosen and you will be able to remove the entire assembly with the check valve attached. 8. Clean and loosen the ball bearing in the check valve and when free, screw the check valve back into the fount, or use a new replacement valve, we offer replacement check valves and other parts. 9. As Always, Check for Leaks. Place empty Font, Lightly Pressurized with air, submerged in water. Look for air bubbles. Or use A Font Pressure Gage. (For sale in our listing) 10.Be careful not to reinstall the valve too tight! 11.00 It's also a good idea to lightly coat the tool with oil as it can rust in a damp environment. Note: This auction is for the check valve removal tool and 2 rods With wingNut only. The lantern is not for sale. I do have the other service tools ( fuel valve removel tools and parts) available in separate listings. No Returns > Not accepted unless item is grossly misrepresented. Should you have any issue with my tools, simply contact me for resolution. Note: Due to Screen and lighting differences, Items color, size may vary from Photo. Feedback : We Strive for customer Satisfaction, Striving for a 5 Star excellence standard. Your Positive feedback is very important to us. We ask that you contact us Before leaving a negative feedback so we can satisfy your concerns. The Tools are made and designed from the ground up by me in the USA in my prototype/product machine shop. Offering Tools to help in the Disassembling of your lantern or stoves to repair and clean them. I am also a collector of Coleman lanterns and a member of Coleman forums I've been in business many years and have sold hundreds of these with 100% satisfaction as shown in my reviews. I also machine and build reproduction parts. Classiccolemantoolparts. —> Web

Price: 32 USD

Location: Penn Yan, New York

End Time: 2024-08-03T10:59:36.000Z

Shipping Cost: N/A USD