Stainless Steel MAP/PSIa Sensors Pressure For Engine Management System Fuel OIL

Description: ProTunerz Stainless Steel Pressure Transducer Sensor . Works on 5v REF and outputs a signal from 0-5v. These are waterproof can be used for air/liquid. As a boost/MAP sensor, FUEL/Coolant/Oil Sensor. Very CRITICAL when tuning an engine can be set as a fuel/pressure cut off, kick off another relay (2nd pump etc) at desired pressure and much more. Same kit as Haltech/AEM/Holley But a fraction of the price. Fitment:For oil, fuel, diesel, gas, water, air pressureCan be used in oil tank, gas tank, diesel tank etc. Features:It's an advance pressure sender than traditional mechanical pressure sender;CMC for Load Cell Sensor;CMC for Pressure and Pull Pressure Sensor. Package Included:1 x Pressure Transducer. Pigtail harness or Crimp FREE SHIPPING TO USA AND CANADA with trackingBuy 2pcs 10% OFFBuy 3pcs 15% OFFBuy 4pcs or more 20% OFF DETAILS BELOW Specification:Product Name: Oil Fuel PressureTransducerMaterial: Stainless Steel & RubberColor: Silver & BlackVoltage: DC 5VLength: 53mmThread: 1/8"-27 NPT / 1/8" NPTPressure: 5psi, 15psi, 30psi,60psi, 100psi, 150psi,200psi,300psi,500psi,1000psi,1600psiConnector: Pigtail 6" OR Crimp (select choice) Quantity: 1pc 5 psiInput: 0-5 psi.Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 2.5 psi outputs 2.5V, 5 psi outputs 4.5V.Accuracy: within 2% of reading (full scale).Thread: 1/8”-27 NPT.Wiring connector: water sealed quick disconnect. Pigtail harness or Crimp Wiring: Red for +5V. Black for ground. Blue for signal output. 15 psiInput: 0-15 psiOutput: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.Accuracy: +/-0.5%FS;Thread: 1/8” NPT;Wiring Connector: Packard plug-in unit is included;Wiring: Red: +5V; Black: ground; Green: signal output;Overload Capacity: 2-4 times;Working Temperature: -40—+120ºC;Compensation Temperature: -20—+80ºC;Protection Class: IP67;Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;Long-term stability: Less than 0.1%FS/year;Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;Shock Resistance: 1000g;Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);Response Time: ≤1ms;Insulation Resistance: >100mΩ 500VDC;Explosion-proof Class: ExiaTTCT6;Electromagnetism Compatibility: EN50051-1. 30 psiInput: 0-30 psi.Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 15psi outputs 2.5V, 30 psi outputs 4.5V.Accuracy: within 2% of reading (full scale).Thread: 1/8”-27 NPT.Wiring connector: water sealed quick disconnect. Pigtail harness or Crimp Wiring: Red for +5V. Black for ground. Blue for signal output. 100 psiInput: 0-100 psi.Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.Accuracy: within 2% of reading (full scale).Thread: 1/8”-27 NPT.Wiring connector: water sealed quick disconnect. Pigtail harness or Crimp Wiring: Red for +5V. Black for ground. Blue for signal output. 200 psiPressure Range: 0-200 psiOutput: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5VWorking Temperature: -40—+125ºC;.Accuracy: ±1%FS;Thread: 1/8”-27 NPT.Overload Capacity: 2 times;Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;Load Resistance: ≤(supply power-6.5V/0.02A)Ω;Long-term stability: ± 0.2%FS/year;Temperature Effect on Zero: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;Shock Resistance: 100g;Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);Response Time: ≤1ms;Insulation Resistance: >100mΩ 500VDC;Explosion-proof Class: ExiaTTCT6;Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3 ;Wiring: Red for IN+. Black for GND. Green for OUT. 300psiInput: 0-300 psi(Gauge Pressure);Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.Accuracy: +/-0.5%FS;Thread: 1/8” NPT;Wiring Connector: Packard plug-in unit is included;Wiring: Red: +5V; Black: ground; Green: signal output;Overload Capacity: 2-4 times;Working Temperature: -40—+120ºC;Compensation Temperature: -20—+80ºC;Protection Class: IP67;Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;Long-term stability: Less than 0.1%FS/year;Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;Shock Resistance: 1000g;Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);Response Time: ≤1ms;Insulation Resistance: >100mΩ 500VDC;Explosion-proof Class: ExiaTTCT6;Electromagnetism Compatibility: EN50051-1. 500 psiInput: 0-500 psi(Gauge Pressure);Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V, 500 psi outputs 4.5V. 1000 psiInput: 0-1000 psi.Output: 0.5V – 4.5V linear voltage out 1600psiInput: 0-1600 psi(Gauge Pressure);Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 80 Fitment:For oil, fuel, diesel, gas, water, air pressureCan be used in oil tank, gas tank, diesel tank etc. Features:It's an advance pressure sender than traditional mechanical pressure sender;CMC for Load Cell Sensor;CMC for Pressure and Pull Pressure Sensor. Package Included:1 x Pressure Transducer. Pigtail harness or Crimp

Price: 42 USD

Location: Nepean, Ontario

End Time: 2024-12-28T08:53:55.000Z

Shipping Cost: 0 USD