SparkFun Pressure Sensor Breakout - MS5803-14BA High Resolution Pressure Sens...

Description: Brand New SparkFun Pressure Sensor Breakout - MS5803-14BA High Resolution Pressure Sensor I2C and SPI Interface Resolution Range of 1/0.6/0.4/0.3/0.2 mbar. Manufacturer model: SEN-12909 This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface.This Pressure Sensor Features: Operating Voltage - 1.8 to 3.6V. Peak Supply Current - 1.4 mA. Operating Range - 0 to 14 bar. Resolution - 1 / 0.6 / 0.4 / 0.3 / 0.2 mbar. I2C and SPI Interface. Gel Protected.We have broken out all the pins you need including GND and 3.3V for power, SDA/SDI and SCL/SCLK for an I2C interface and SD0, AD/CS, and PS for a SPI interface. The MS5803-14BA Breakout offers a resolution range of 1 / 0.6 / 0.4 / 0.3 / 0.2 mbar.You'll need to modify the jumpers on the board for SPI mode by removing solder from the pull-up resistors jumper pads and close the other two jumpers. Additionally, you will need to write a library to communicate with the MS5803 in SPI mode if you plan on using this compatible with Arduino.This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. Description This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you interpret the data, you can determine altitude, water depth, or any other tasks that require an accurate pressure reading. What makes the MS5803-14BA unique is the the gel membrane and antimagnetic stainless steel cap that protects against 30 bar water pressure. We have broken out all the pins you need including GND and 3.3V for power, SDA/SDI and SCL/SCLK for an I2C interface and SD0, AD/CS, and PS for a SPI interface. The MS5803-14BA Breakout offers a resolution range of 1 / 0.6 / 0.4 / 0.3 / 0.2 mbar. Be aware that to switch between I2C and SPI interfaces a little bit of soldering between solder pads will be required, check the hookup guide below for more information. Heads up! While the IC is capable of outputting data via I2C and SPI, You'll need to modify the jumpers on the board for SPI mode by removing solder from the pull-up resistors jumper pads and close the other two jumpers. Additionally, you will need to write a library to communicate with the MS5803 in SPI mode if you plan on using this compatible with Arduino. Shipping and Handling Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US. We will provide an online tracking number to you once the item has been shipped. It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times. Return Policy All our products are brand new and sealed. All items qualify for returns within 30 days of receipt. Feedback We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.

Price: 99.79 USD

Location: Within United States

End Time: 2025-01-11T02:58:56.000Z

Shipping Cost: 0 USD