SOVOL SV07/SV07 Plus - Klipper 3D Printer with Auto Bed Leveling, All-Metal Hote

Description: SOVOL SV07/SV07 Plus - Klipper 3D Printer with Auto Bed Leveling, All-Metal Hotend, and Enhanced Build Volume The difference between the SV07 and the SV07 Plus is primarily the build volume, the SV07 has a 220x220x250mm (~8.6x8.6x9.8") build volume, the SV07 plus sports a larger 300x300x350mm build volume (~11.8x11.8x13.8") Sovol SV07 / SV07 Plus The Yeh: This 3D printer runs Klipper out to the box, this saves over the SV06 where a dedicated display/klipper solution would be required (Klipper is our preferred firmware) The SV07/SV07 Plus have WIFI out of the box This 3D Printer is Open Source and has a strong community of users behind it This 3D Printer comes mostly assembled and is simple to put together This 3D Printer packs an good price (low)/performance(medium) ratio in the industry for the build volume and features The SV07 Plus has a great 300x300x350mm build volume, letting you print large prints in one go! This 3D Printer has auto bed leveling which will make your life so much easier The SV07/SV07 Plus both sport a rear auxiliary fan, for improved overhangs and cooling performance The Meh: This 3D Printer uses traditional v-slot wheels, these potentially impact speed performance over using something like linear rails or smooth rods The 3D printer has bed leveling screws which while convenient is also something we prefer to avoid in favor of a more rigid design The overall speeds the printer pushes are OK, there are higher performance printers (at a higher cost) on the market The Verdict: This is a great upgrade from an entry-level printer. The price is great for the performance and the printer is sure to deliver solid performance. Klipper out of the box gives you a lot of room to make this printer your own with custom macros and modifications. Some details from SOVOL: Sovol SV07 5 Inch Klipper Screen The Klipper touchscreen has great function options like height map and input shaper. It is customizable to suit your other printing needs. The Klipper firmware can make SV07 / SV07 Plus print at 250mm/s even you can speed up to 500mm/s. Planetary Dual Gear Direct Drive Extruder It provides SV07 / SV07 Plus with a higher drive ratio and a lighter motor, making extrusion more accurate. 300℃ High Temp All Metal High Flow Hotend All metal hotend with larger melt zone enables SV07 / SV07 Plus to print at fast speed and various materials, satisfying your demand for high temp and high speed. LED Light Added light set under the extruder is good to help observe the prints at night and it will make your prints look beautiful. You could capture these shining pictures of your creations and share them with your friends. BUILD VOLUME 220*220*250mm print size (SV07), 300*300*350mm print size (SV07 Plus), enough for daily use and household use. 5 Inch Klipper Screen SV07 is equipped with a 480x800 high-resolution 5-inch touch screen which brings you totally different experience from the knob screen and normal 4.3-inch touch screen in the market. Multiple languages are also supported on the operating screen. Full Klipper Firmware Klipper firmware allows the high-speed printing of SV07 up to 500mm/s. We recommend you choose 250mm/s for optimal results. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs. Planetary Dual Gear DirectDrive Extruder With Sovol's self-developed All Metal Direct Drive Extruder that comes with a planetary dual gear set, SV07 / SV07 Plus offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions. 300℃ High Temp All MetalHigh Flow Hotend SV07 All-metal hotend comes with a larger melt zone, which makes SV07 print at 300℃. An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and achieves good layering for better results. It makes the high speed and high temperature possible. No more PTFE replacements or firmware flashes are needed to print with different materials easily, like ABS, Nylon, Carbon Fiber, PC, PETG, Wood, etc. (Enclosure still required for printing above 260℃) Triple Cooling Fan An added large fan behind the extruder helps to cool prints fast under high-speed printing and get a beautiful printing layer. Anti-Backlash Nut Anti-backlash nut can reduce shaking when printing and make printing more stable. Tool Drawer It's very convenient to pull out the tool drawer for quick storage and easy organization. Keep your workspace tidy and efficient with this small upgrade. G34 Auto Z Align As UART mode is opened on the SV07 mainboard, and G34 is updated, SV07 / SV07 Plus has the G34 Auto Z Align function. If you want to level the X-axis, all you need to do is click Auto Z-align, and the printer will process the X-axis leveling automatically. Saves time and effort. 25-point Auto Leveling SV07 / SV07 Plus uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results. PEI Build Plate The flexible plate of SV07 / SV07 Plus is not only a magnetic print bed that offers excellent adhesion but also a durable part. You could remove prints easily without any tools. If you have any adhesion issues we recommend you wipe the PEI surface with alcohol before the next printing. Filament Sensor It will pause the printing automatically if you run out of your filament or if the filament is broken. SOVOL SV07/SV07 Plus - Klipper 3D Printer with Auto Bed Leveling, All-Metal Hotend, and Enhanced Build Volume The difference between the SV07 and the SV07 Plus is primarily the build volume, the SV07 has a 220x220x250mm (~8.6x8.6x9.8") build volume, the SV07 plus sports a larger 300x300x350mm build volume (~11.8x11.8x13.8") Sovol SV07 / SV07 Plus The Yeh: This 3D printer runs Klipper out to the box, this saves over the SV06 where a dedicated display/klipper solution would be required (Klipper is our preferred firmware) The SV07/SV07 Plus have WIFI out of the box This 3D Printer is Open Source and has a strong community of users behind it This 3D Printer comes mostly assembled and is simple to put together This 3D Printer packs an good price (low)/performance(medium) ratio in the industry for the build volume and features The SV07 Plus has a great 300x300x350mm build volume, letting you print large prints in one go! This 3D Printer has auto bed leveling which will make your life so much easier The SV07/SV07 Plus both sport a rear auxiliary fan, for improved overhangs and cooling performance The Meh: This 3D Printer uses traditional v-slot wheels, these potentially impact speed performance over using something like linear rails or smooth rods The 3D printer has bed leveling screws which while convenient is also something we prefer to avoid in favor of a more rigid design The overall speeds the printer pushes are OK, there are higher performance printers (at a higher cost) on the market The Verdict: This is a great upgrade from an entry-level printer. The price is great for the performance and the printer is sure to deliver solid performance. Klipper out of the box gives you a lot of room to make this printer your own with custom macros and modifications. Some details from SOVOL: Sovol SV07 5 Inch Klipper Screen The Klipper touchscreen has great function options like height map and input shaper. It is customizable to suit your other printing needs. The Klipper firmware can make SV07 / SV07 Plus print at 250mm/s even you can speed up to 500mm/s. Planetary Dual Gear Direct Drive Extruder It provides SV07 / SV07 Plus with a higher drive ratio and a lighter motor, making extrusion more accurate. 300℃ High Temp All Metal High Flow Hotend All metal hotend with larger melt zone enables SV07 / SV07 Plus to print at fast speed and various materials, satisfying your demand for high temp and high speed. LED Light Added light set under the extruder is good to help observe the prints at night and it will make your prints look beautiful. You could capture these shining pictures of your creations and share them with your friends. BUILD VOLUME 220*220*250mm print size (SV07), 300*300*350mm print size (SV07 Plus), enough for daily use and household use. 5 Inch Klipper Screen SV07 is equipped with a 480x800 high-resolution 5-inch touch screen which brings you totally different experience from the knob screen and normal 4.3-inch touch screen in the market. Multiple languages are also supported on the operating screen. Full Klipper Firmware Klipper firmware allows the high-speed printing of SV07 up to 500mm/s. We recommend you choose 250mm/s for optimal results. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs. Planetary Dual Gear DirectDrive Extruder With Sovol's self-developed All Metal Direct Drive Extruder that comes with a planetary dual gear set, SV07 / SV07 Plus offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions. 300℃ High Temp All MetalHigh Flow Hotend SV07 All-metal hotend comes with a larger melt zone, which makes SV07 print at 300℃. An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and achieves good layering for better results. It makes the high speed and high temperature possible. No more PTFE replacements or firmware flashes are needed to print with different materials easily, like ABS, Nylon, Carbon Fiber, PC, PETG, Wood, etc. (Enclosure still required for printing above 260℃) Triple Cooling Fan An added large fan behind the extruder helps to cool prints fast under high-speed printing and get a beautiful printing layer. Anti-Backlash Nut Anti-backlash nut can reduce shaking when printing and make printing more stable. Tool Drawer It's very convenient to pull out the tool drawer for quick storage and easy organization. Keep your workspace tidy and efficient with this small upgrade. G34 Auto Z Align As UART mode is opened on the SV07 mainboard, and G34 is updated, SV07 / SV07 Plus has the G34 Auto Z Align function. If you want to level the X-axis, all you need to do is click Auto Z-align, and the printer will process the X-axis leveling automatically. Saves time and effort. 25-point Auto Leveling SV07 / SV07 Plus uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results. PEI Build Plate The flexible plate of SV07 / SV07 Plus is not only a magnetic print bed that offers excellent adhesion but also a durable part. You could remove prints easily without any tools. If you have any adhesion issues we recommend you wipe the PEI surface with alcohol before the next printing. Filament Sensor It will pause the printing automatically if you run out of your filament or if the filament is broken. × × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Prem Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © West3D Printing Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 275.99 USD

Location: Beaverton, Oregon

End Time: 2024-08-25T21:09:19.000Z

Shipping Cost: N/A USD