Solder Pellet Solder Slug for 1/0 Awg wire Black 4 Pack

Description: 4-Pack of Black Solder Pellets/Slugs for 1/0 Awg Closed Ended Connectors. Solder Slugs/Pellets were developed as a fast effective method to attach a wire or cable to a closed end connector. A cost effective easy method to attach wire or cable to a connector without having to buy an expensive crimping tool. Solder Slugs/Pellets are sized and color coded for the exact gauge wire you are using. 4 Ga Gray 2 Ga Green 1 Ga Pink 1/0 Ga Black 2/0 Ga Orange 3/0 Ga Purple 4/0 Ga Yellow Instructions for use of solder slugs Strip cable so the the exposed stranded copper just reaches the bottom of the closed end terminal. Apply 1-3 drops of liquid flux to the exposed copper cable. Sold on listing 370103351357 Place the proper sized slug into the terminal, and clamp the terminal in a vise with the open end of the terminal pointed upward. If you intend to cover the terminal in heat shrink tubing (recommended), place the tubing over the cable. Heat the base of the terminal with a propane torch until the slug begins to melt. As the slug melts gently push the cable into the terminal. A small bubbling may occur at the open end of the terminal This is normal. Once the cable is completely inserted into the terminal remove the torch. And let air cool for about 10-15 seconds. If you are using heat shrink tubing, slide the tubing over the terminal and heat with a Indirect heat source such as a heat gun. Remove from vise and allow to cool until it is warm to the touch. Do not use water to speed the cooling process. Always wear safety glasses and protective clothing. We carry a large selection of electrical components such as solder pellets/plugs, lugs, heat shrink tubing, circuit breakers and hundreds of other items. We sell the liquid flux on our listing number 370103351357 Thank you for looking. See our other listings for more sizes and other items. CE36233

Price: 7 USD

Location: Saint Paul, Minnesota

End Time: 2024-09-15T01:55:30.000Z

Shipping Cost: 6.01 USD