Skilhunt H04 High-CRI 5000K Samsung LH351D

Description: Skilhunt H04 High-CRI 5000K Samsung LH351D Skilhunt H04 High-CRI 5000K Samsung LH351D ** Please note this version does not have internal charging. If you need that please ensure you select an H04 “RC” version**________________________________________Double UIMode group A, Keep the H03 main operation way.Mode group B, Customized operation way with editable.________________________________________ LED: Samsung LH351D 90 CRI 5000KMax output:ANSI 790 Lumens / 950 LED Lumens (LH351D)Max runtime: Few monthsMax beam distance: 123 metersMax peak beam intensity: 3800cdWaterproof: IPX-8Impact-resistant: 1 MeterBattery: 1×18650 , 2x CR123A , 2x RCR123ARated Range: 2.7V ~ 8.4V Dimension:Length 99.9mm / 3.93 inchHead diameter 23.5mm / 0.93 inchBody diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery)Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring________________________________________Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight, the battery positive pole toward the light head.Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on, the beam is directed away from the eyes.When storing the light with Bankcards(magnetic) or Cell phone, you should replace the magnet with the rubber pad.________________________________________2. Turn ON/OFF & Mode transferTransfer Mode A / Mode B:When headlamp is turned off without lockout, hold press side switch for 5 seconds, the light will flash three times fast, then flash three times slow.________________________________________Mode Group AWhen the flashlight was OFF status:Click the switch to memorized brightness level.Quickly double click the switch to Turbo(T1/T2).Quickly triple-click the switch to Strobe(S1) mode.Press switch 0.5 seconds to Low(L1/L2) mode. When the flashlight was ON(any mode) status:Press and hold the side switch for 0.5 seconds to turn off. Brightness & mode selection:Brightness level:Press side switch to Low-Mid-High-Turbo, cycle.Quickly double press the side switch to Sub-level(i.e between L1 & L2), turn off memorized the last brightness.Quickly triple press to Special modes. Special modes:Quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side switch back to previous brightness level.________________________________________Mode Group BWhen the flashlight was OFF status:Click the switch to memorized brightness level.Press switch 0.5 sec, to L2.Quickly double click switch to Turbo(T1) mode.Quickly triple press to Special modes(S1). When the flashlight was ON(any mode) status:Click the switch to turn off.On Common used levels(Editable):Hold press switch, brightness levels automatic cycle, and selected mode by button released. Click the switch to turn off.Quickly triple press enter to Edit levels.On Special modes: Quickly double click switch to transfer mode S1/S2/S3，click switch to turn off.Hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high.Quickly triple press to restore to the factory default flash modes.________________________________________Edit Levels:— Support to 2 ~ 7 common used levels can be selected–Enter to edit level, 7 levels circle automatically. The selected level, side switch indicator is on. Not selected brightness, side switch indicator is off.–Factory’s default levels: L2-M2-H2-T2. The indicator light on synchronously when levels automatic cycles.–Selected / Not selected brightness, Click side switch to turn on / off the corresponding indicator. -. All selected finished, hold press 1 second the side switch save selected and quit edit mode. The light will be flash three times, and back to the lowest selected level.-. Restore the factory default levels: Enter to edit level, then click side switch three times. (Light will be turned off after three clicks.)________________________________________Location indicator & Lock-out functionWhen turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click double click the switch to turn on/off the indicator, the indicator light flashes every second, locate the flashlight, Easily find the flashlight in the dark quickly. Press switch 1.5 sec, switch unlock, and enter into low mode.________________________________________Power indicatorEvery time turn on, the side indicator will be light for 5 seconds to display the battery power.Blink four times: battery power in 100%~80%;Blink three times: battery power in 80%~50%;Blink twice: battery power in 50%~20%;Blink one time: battery power below 20%.________________________________________Features1. Super bright & latest Samsung LH351D 90 CRI 5000K emitter. High-Performance, High-Efficiency, and energy conservation.2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beam shot, excellent structure, and temperature resistance.3.Rugged indestructible aluminum body with anti-scratching type III hard anodization4.Multi-level dissipating heat design and new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.5.Side switch button to transferring mode, user-friendly interface to adjust output.6.Two mode groups plus editable brightness, more use options for choose.7.Wide input range provides more choices of batteries. High-efficiency driver circuit, no visible flash in any mode.8.Automatic memory function, remember last used setting, and can be preset to specific output mode for instant access.9.Intelligent temperature control technology for flashlight stable and safe use.10.Reverse polarity protection, to protect from improper battery installation.11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light is locked out, the location indicator will flash making it easy to find the light in dark.13.Magnetic tail, can be used on many special occasions, use as candlelight, etc. Skilhunt H04 High-CRI 5000K Samsung LH351D Skilhunt H04 High-CRI 5000K Samsung LH351D ** Please note this version does not have internal charging. If you need that please ensure you select an H04 “RC” version** ________________________________________ Double UI Mode group A, Keep the H03 main operation way. Mode group B, Customized operation way with editable. ________________________________________ LED: Samsung LH351D 90 CRI 5000K Max output: ANSI 790 Lumens / 950 LED Lumens (LH351D) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact-resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 8.4V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight, the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on, the beam is directed away from the eyes. When storing the light with Bankcards(magnetic) or Cell phone, you should replace the magnet with the rubber pad. ________________________________________ 2. Turn ON/OFF & Mode transfer Transfer Mode A / Mode B: When headlamp is turned off without lockout, hold press side switch for 5 seconds, the light will flash three times fast, then flash three times slow. ________________________________________ Mode Group A When the flashlight was OFF status: Click the switch to memorized brightness level. Quickly double click the switch to Turbo(T1/T2). Quickly triple-click the switch to Strobe(S1) mode. Press switch 0.5 seconds to Low(L1/L2) mode. When the flashlight was ON(any mode) status: Press and hold the side switch for 0.5 seconds to turn off. Brightness & mode selection: Brightness level: Press side switch to Low-Mid-High-Turbo, cycle. Quickly double press the side switch to Sub-level(i.e between L1 & L2), turn off memorized the last brightness. Quickly triple press to Special modes. Special modes: Quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side switch back to previous brightness level. ________________________________________ Mode Group B When the flashlight was OFF status: Click the switch to memorized brightness level. Press switch 0.5 sec, to L2. Quickly double click switch to Turbo(T1) mode. Quickly triple press to Special modes(S1). When the flashlight was ON(any mode) status: Click the switch to turn off. On Common uséd levels(Editable): Hold press switch, brightness levels automatic cycle, and selected mode by button released. Click the switch to turn off. Quickly triple press enter to Edit levels. On Special modes: Quickly double click switch to transfer mode S1/S2/S3，click switch to turn off. Hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high. Quickly triple press to restore to the factory default flash modes. ________________________________________ Edit Levels: — Support to 2 ~ 7 common uséd levels can be selected –Enter to edit level, 7 levels circle automatically. The selected level, side switch indicator is on. Not selected brightness, side switch indicator is off. –Factory’s default levels: L2-M2-H2-T2. The indicator light on synchronously when levels automatic cycles. –Selected / Not selected brightness, Click side switch to turn on / off the corresponding indicator. -. All selected finished, hold press 1 second the side switch save selected and quit edit mode. The light will be flash three times, and back to the lowest selected level. -. Restore the factory default levels: Enter to edit level, then click side switch three times. (Light will be turned off after three clicks.) ________________________________________ Location indicator & Lock-out function When turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click double click the switch to turn on/off the indicator, the indicator light flashes every second, locate the flashlight, Easily find the flashlight in the dark quickly. Press switch 1.5 sec, switch unlock, and enter into low mode. ________________________________________ Power indicator Every time turn on, the side indicator will be light for 5 seconds to display the battery power. Blink four times: battery power in 100%~80%; Blink three times: battery power in 80%~50%; Blink twice: battery power in 50%~20%; Blink one time: battery power below 20%. ________________________________________ Features 1. Super bright & latest Samsung LH351D 90 CRI 5000K emitter. High-Performance, High-Efficiency, and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beam shot, excellent structure, and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat design and new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Two mode groups plus editable brightness, more use options for choose. 7.Wide input range provides more choices of batteries. High-efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last uséd setting, and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light is locked out, the location indicator will flash making it easy to find the light in dark. 13.Magnetic tail, can be uséd on many special occasions, use as candlelight, etc. × × × × × × × × × × × × × × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Fenix PD36R Skilhunt H04R RC High-CRI 5000k USB Magnetic Rechargeable LED Headlamp Skilhunt H04 RC High-CRI 5000K USB Magnetic Rechargeable LED Headlamp Acebeam BK10 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Killzone Flashlights Shipping & Payments Click the Shipping & Payments tab above the listing description for more info eBay integration by

Price: 46.9 USD

Location: Kingwood, Texas

End Time: 2025-01-05T19:04:00.000Z

Shipping Cost: 6.95 USD