Description: Technical Product BulletinPURE SILVER FILLED ELECTRICALLY CONDUCTIVE EPOXY MAXIMUM CONTINUITY OF CONDUCTIVITYPRODUCT DESCRIPTION: This product is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm•cm. It is also characterized by a wide operating temperature range from –50 to +170°C. This product is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. GENERAL PROPERTIES APPEARANCE Silver CURE TYPE Heat cure or Room temperature BENEFITS High strength Perfect bond Cold solder for heat sensitive components MIX RATIO BY WEIGHT 100:7 / Resin:Hardener SUBSTRATES Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. OPERATING TEMPERATURE -50 to 170 °C TYPICAL APPLICATIONS Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair UNCURED PROPERTIES VISCOSITY @ 25 °C CPS Paste SPECIFIC GRAVITY, MIXED 2.79 REACTIVE SOLIDS CONTENTS, % 100 POT LIFE 30 minutes CURE SCHEDULE: 2 MINUTES @ 120°C 5 MINUTES @ 100°C 12 HOURS @ 25°C MISC PROPERTIES: HARDNESS, SHORE D 83 SHRINKAGE LINEAR IN/IN 0.003 LAP SHEAR STRENGTH, PSI 9400 VOLUME RESISTIVITY OHM CM > 0.0001 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply this compound completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. AVAILABILITY: This epoxy can be supplied in various different packages Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 19.99 USD
Location: Warwick, Rhode Island
End Time: 2024-02-23T16:53:01.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Atom Adhesives
Model: AA-DUCT 902-2
MPN: 902
Country/Region of Manufacture: United States
Typical Applications 1: Electrical, conductive, rmi / efi shielding
Typical Applications 2: circuitry printed circuit board electronic repair
Substrates 1: aluminum, copper, magnesium, steel, bronze
Substrates 2: nickel, kovar, ceramic, glass
Substrates 3: phenolic and G-10 epoxy glass boards.
Benefits: High strength Perfect bond Cold solder
