Rustproof Brake line kit for 2000-01 Dodge Ram 1500 4WD,ABS, Ext Cab, 78" bed

Description: Rustproof Brake line kit for 2000-01 Dodge Ram 1500 4WD,ABS, Ext Cab, 78" bed -PVF lines are better than stainless steel as they are resistantto rust and abrasion, and yet seal better when assembled. -Our -PVF lines are also easier to form and bend than stainless steeland they do not suffer metal fatigue as they flex better with the car body. Many professionals prefer -PVF lines in their restorations! Buy for the future brake job!!!replace your rusted lines!! Polyvinylfluoride (PVF) is a durable, abrasion resistant outer coating for brake lines. - PVF exceeds 2,000 hours of salt spray testing, and is highly resistant to abrasion. - The PVF topcoat -is applied -and factory cured over an electro plated zinc -surface. - First used in Europe, this coating is now widely used on new cars and -trucks all over the world. - It is better than stainless steel because the inverted -flare connections on our lines still contain copper to seal the fittings. - Retrofitting stainless steel on inverted -flare fittings results in leaks because the -copper sealant -is not present. Important! Please enter your truck info in the compatibility section in this listing.If not sure if it fits your truck please message us for assistance.This kit fits: 2000-01 Dodge Ram 1500 4WD, 4 wheel ABS, Ext Cab, 78" bedInformation on lines are for OEM brake systems only. The lines may not fit any brake system that has been modified. This is a complete brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached -- ready for quick easy installation. All brake lines have an extra long nut on one end to seat in late model deep-seated wheel cylinders. These -malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. A chart of your brake system is included and all lines are clearly marked and numbered as to where they should be installed. Couplers are included where necessary. - Our TrueBend®- brake lines resist corrosion, vibration, fatigue and shock from impact. They are -coated for corrosion protection in compliance with GM132M-ASV and SAE J527B. - Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube. - Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube. - The tube is then given a PVF outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai- yet can still be easily bent without kinking or without damaging the - PVF outer coat. - In any correspondance please be specific and include our ebay # EE28056 Powered by SixBit's eCommerce Solution

Price: 84.95 USD

Location: Duluth, Minnesota

End Time: 2024-12-30T04:03:20.000Z

Shipping Cost: N/A USD