Rockford Fosgate Punch P1000X1bd 1000W x 1 Car Amplifier

Description: Product highlightsmono subwoofer amplifier 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) 1000 watts RMS x 1 at 1 ohm CEA-2006 compliant Features: variable low-pass filter filter (50-250 Hz, 12 dB/octave) selectable subsonic filter (28Hz, 12 dB/octave) variable PEQ2 bass boost (0-18 dB at 45 Hz) C.L.E.A.N. gain setup system includes test tone CD test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-250 Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp inputs and outputs speaker-level inputs ( speaker wire to RCA adapter required) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 140-amp fuse recommended - wiring and hardware not included with amplifier no onboard fuses - when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended 13-3/8"W x 2-7/16"H x 8-13/16"D warranty: 1 year What's in the boxMono subwoofer amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc About this itemWritten by Crutchfield's Buck PomerantzBig power for your sub or sub system Rockford Fosgate's Punch P1000X1bd subwoofer amp can produce up to 1000 watts RMS, giving you plenty of clean power for your rhythm track. And the P1000X1bd can drive a 1-ohm load, so you can power multiple subs without any trouble. A low-pass filter keeps the high notes away from your sub, while a subsonic filter helps you rein in runaway boom. The Punch bass boost lets you add some of that boom back into the mix when it's needed. Easy to set for optimum performance P300X2 control panel shown as example Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) - a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple - your amplifier is now set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Punch amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playing If that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Maintaining coolness raises efficiency and lowers distortion Rockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. P1000X1bd connection panel with input clip light

Price: 499.99 USD

Location: Charlottesville, Virginia

End Time: 2024-08-24T00:35:06.000Z

Shipping Cost: 0 USD