RisingCam Monochrome 2.0mp imx462 sensor USB3 Astronomy telescope guide camera

Description: RisingCam Monochrome Ultra high sensitivity max 152fps 2.0mp imx462 sensor USB3.0 astronomical telescope guide camera with ST4 auto guiding (RisingCam provide 4 different color Golden, Red, Blue, Green for buyer choice. Buyer could leave meassge for us to select color when place order. If buyer not specify color,we will shipping camera in random color) Monochrome sensor Camera's protect window default install double-side AR coating Protective glass 380-1100nm RisingCam G3M462M camera possesses an exceptionally strong capability to capture infrared light (with a high QE value at 500nm). It also has a large full well capacity, high dynamic range, high sensitivity, and low readout noise among other advantages. This results in outstanding performance in planetary photography, as well as in solar and lunar photography. camera is Guiding CMOS camera and it adopts ultra-high performance CMOS sensor as the image-picking device. USB3.0 is used as the data transfer interface. A built-in ST4 auto guider port is designed for the easy connection of the auto guider. Aluminum CNC housing with standard 1.25 inch interface(outer) to fit to telescope eyepiece and standard C-mount(inner) for standard industrial lens. Native/ASCOM/WDM driver for easy connection with 3rd party astrophotography softwares. The G3M camera can be widely used in astrophotography (Moon, Sun, Planets as well as Galaxies, Cluster and Nebulae). The features of G3M462M are listed below: Camera installed imx462 Mono CMOS Sensor Sensor size 1/2.8"(5.57x3.13mm), Resolution: 2.0mp Max Frame rate: 152fps / 1920x1080 long time exposure (0.1ms-1000s), high sensitivity: 2376mv with 1/30s Compact size and low amp glow Amp-glow Reduction 2.9 um Square Pixels 12-bit ADC 512 Mbyte Memory Low Noise: 0.49 to 2.1e- Support High Frame Rate Mode (152 FPS at all Pixel Readout 8 bit) SNR Max: 41 dB Dynamic Range: 75 dB Camera Specification Sensor Sony IMX462 back illuminated sensor Diagonal 6.39 mm Image Resolution 2.1mega pixels (3840*2160) Pixel Size 2.9mm ´2.9mm Image Area 5.57mm ´3.13mm Max FPS at Resolution (USB 3.0) 12bit 8bit 76.1FPS@ 1920*1080 152FPS@ 1920*1080 Max FPS at Resolution (USB 2.0) 12bit 8bit 7.3 FPS @ @ 1920*1080 15.6FPS @ 1920*1080 Shutter Type Rolling shutter Exposure Time 0.1ms – 1000s Gain 1x – 150x SNR 41dB Dynamic Range 75 dB Read Noise 2.1– 0.49e- QE Peak >89% Full Well 11.8ke- ADC 12bit DDR3 Buffer 512MB (4Gb) Connection Port USB3.0/USB2.0 Camera Adaptor Standard1.25’’ for telescope connection, and standard C adapter for industrial lens Protect Windows double-side AR coating Protective glass Spectral Range 380-1100nm (with AR protection window) Capture/Control SDK Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.); Recording System Still picture and movie Camera Dimensions Diameter 37mm * height 72.4mm Camera Weight 70 gram Back Focus Distance 17.5mm with C adapter, 12.5 with CS adapter Cooling: Passive cooling Supported OS Microsoft®Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit) OSx(Mac OS X) Linux OTHER HARDWARE CONFIGURATION Spectral Range Monochrome sensor 380-1100nm with Double Side AR Coating Protect Window White Balance ROI White Balance/ Manual Temp-Tint Adjustment Color Rendering Technique Ultra Fine Color Engine Recording System Still Picture and Movie GuildingPort ASCOM ST4-port Cooling System* Natural with High Performance Cooling Structure OPERATING ENVIRONMENT Operating Temperature -10C--50C Storage Temperature -20C--60C Operating Humidity 30~80%RH Storage Humidity 10~60%RH Power Supply DC 5V over PC USB Port SOFTWARE ENVIRONMENT Operating System Support MicrosoftWindows XP / Vista / 7 /8/10 (32 & 64 bit) OS X (Mac OS X), Linux PC Requirements CPU: Equal to Intel Core2 2.8GHz or Higher Memory: 2GB or More USB port: USB2.0 High-speed Port Display: 17" or Larger CD-ROM Camera Detailed pictures Monochrome Sensor: Sony IMX462- 1/2.8"(5.57x3.13mm), Resolution: 2.0mp Max Frame rate: 152fps / 1920x1080 (8bit) long time exposure (0.1ms-1000s), high sensitivity: 2376mv with 1/30s Sony IMX462 Sensitivity The sensor G Sensitivity of G3M462M is 2376mv with 1/30s. Its spectral sensitivity is shown in Figure 1.The sensitivity is measured with a testing standard lens with CM500S(t = 1.0mm) as an IR-cut filter and image at F8.0. If the image is measured at F5.6, the result could have been 2 times of the current value. 12bit ADC and ROI The G3M462M has built in 12bit ADC. It also has 12bit output mode for hardware binning and smaller resolution. The camera also supports hardware ROI, and the smaller the ROI size is, the higher the frame rate is. Table 2 shows the frame rate of the G3M462M in 12/8bit mode, USB3.0 / USB2.0 data transfer interface at different resolutions: Table 2 G3M462M Frame Rate at Different Resolution/Data Bit/Data Transfer (USB3.0/ USB2.0) Bit & Interface FPS Resolution 12bit ADC 8bit ADC USB3.0 USB2.0 USB 3.0 USB 2.0 1920*1080 152 7.3 76 15.6 DDR3 Buffer G3M462M camera has a 512MB (4Gb) DDR3 buffer, which helps maintain the stability of data transmission, and effectively reduce the amp-glow caused because image data can be temporarily buffered without being sent hastily to the receiver. Binning The G3M462M supports digital binning from 1x1 to 8x8 in either stacking or averaging method. Conversion Gain Switch G3M462M support HCG、LCG mode switch. Power System The camera operates via a USB 3.0 interface. Upon establishing a connection with the host system using the USB 3.0 cable, the device is primed for operation. ST4 auto guider port, USB3.0 Output ASCOM/WDM (DirectShow)/Native driver/INDI for easy connection with 3rd party astrophotography softwares Supported Software for this camera includes: NINA, PHD Guiding, Nebulosity,MaxIm DL, SharpCap, MetaGuide,Fire Capture, Astro Art, Registax, AstroStack, DeepSky Stacker, Kstars etc Our this camera support INDI INDI is a protocol for the control of astronomical equipment. It is an open source project that aims to provide a unified control interface for various types and brands of astronomical equipment. StellarMate supports INDI protocol, so you can use it to control various devices connected to StellarMate. Our this camera support StellarMate StellarMate is an astronomy equipment management software. It provides an easy-to-use interface to control telescopes, cameras and other equipment from a computer or mobile device. With StellarMate, you can automate imaging, shot time tracking, metering and exposure timing without manual intervention. StellarMate also includes astronomical image processing tools to help you process and adjust your data after imaging. Our this camera support StellarMate X controller StellarMate X is a compact and powerful Astrophotography Controller that supports numerous Mounts, Cameras, and other astronomical equipment. Powered by Open Source technologies and designed and built by Astrophotographer for Astrophotographers. It provides unparalleled freedom in selecting your favorite platform to remotely control your equipment. You can use Ekos astrophotography tool on Windows, MacOS, or Linux. Furthermore, use StellarMate App on iOS and Android to automate your complete astrophotography workflow Amp-glow Reduction Technology What is amp-glow reduction technology? Most sensor have amp-glow problem when you do long-time exposure , such as longer than 1s “amp glow reduction technology” is a hardware modification to reduce the amp-glow of sensor. The G3M Camera adopts Amp-glow reduction technology Amp-glow reduction test result of G3M Camera Camera work with astronomy telescope by OAG Camera Dimension The G3M camera body, made from tough, alloy, ensures a heavy duty, workhorse solution. No moving parts included. These measures ensure a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions. Camera with 1.25" adapter RisingSky Software RisingSky is Professional software for Astronomical applications, which has multi-functions such as Camera parameter adjustment, capture images&video, modify image, process image etc. it can provide many tools choice for user. RisingSky Support Windows XP/7/8/10/11 system We also Provide RisingView software for MAC system and Linux system User. RisingView for MAC system RisingView for Linux system Sample Photo Astronomy Photo Sample Packing Photo Standard Camera Packing List A Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton, 0.045m3), not shown in the photo B Gift box L:15cm W:15cm H:10cm (0.8~1.0Kg/ box) C G3M series USB3.0 C-Mount camera D High-speed USB3.0 A male to B male gold-plated connectors cable /2.0m E 2.0mguide cable F 1.25 inch nosepiece G CD (Driver & utilities software, Ø12cm) USB3.0 Cable ST4 Guide cable 1.25inch adapter Warranty 1 year

Price: 295 USD

Location: Hangzhou

End Time: 2024-08-03T03:05:33.000Z

Shipping Cost: 0 USD