Reylight LANapple

Description: Reylight LANapple Reylight LanApple Max 600 lumens. Light comes with a rechargeable 14500 battery. (Unprotected, button top cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.) Eneloop NiMH and Alkaline AA works well too. （Energizer Lithium Primary 1.5V battery might have a problem. The inside of it is still lithium, and the voltage and discharging current is limited.） Specs: Material: 6063 aluminum Nichia 519a 4000K Reverse polarity protection LVP (low voltage protection) for Li-ion battery Temperature control to avoid overheating problems Anti-reflective coated lens Aluminum alloy reflector Easy clicky switch operation Tail-stand capability Pocket clip Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm) Spare O-rings 1 tritium slot at tail switch. Programming Guide 1. Turn on the light. 2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats. a. 1 blink: mode group selection. Press the button to enter this menu. i. 1 blink: (ML)-2%-20%-100% ii. 2nd blink: (ML)-10%-40%-100% iii. 3rd blink: (ML)-2%-10%-50% iv. 4th blink: (ML)-50%-100%-strobe-SOS It then repeats. Press the button during any blink to select that mode group. b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off. c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on. d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order. e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings. Shorcut: quick double tap to turbo. Reylight LANapple Reylight LanApple Max 600 lumens. Light comes with a rechargeable 14500 battery. (Unprotected, button top cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.) Eneloop NiMH and Alkaline AA works well too. （Energizer Lithium Primary 1.5V battery might have a problem. The inside of it is still lithium, and the voltage and discharging current is limited.） Specs: Material: 6063 aluminum Nichia 519a 4000K Reverse polarity protection LVP (low voltage protection) for Li-ion battery Temperature control to avoid overheating problems Anti-reflective coated lens Aluminum alloy reflector Easy clicky switch operation Tail-stand capability Pocket clip Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm) Spare O-rings 1 tritium slot at tail switch. Programming Guide 1. Turn on the light. 2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats. a. 1 blink: mode group selection. Press the button to enter this menu. i. 1 blink: (ML)-2%-20%-100% ii. 2nd blink: (ML)-10%-40%-100% iii. 3rd blink: (ML)-2%-10%-50% iv. 4th blink: (ML)-50%-100%-strobe-SOS It then repeats. Press the button during any blink to select that mode group. b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off. c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on. d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order. e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings. Shorcut: quick double tap to turbo. × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Fenix PD36R Skilhunt H04R RC High-CRI 5000k USB Magnetic Rechargeable LED Headlamp Skilhunt H04 RC High-CRI 5000K USB Magnetic Rechargeable LED Headlamp Acebeam BK10 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Killzone Flashlights Shipping & Payments Click the Shipping & Payments tab above the listing description for more info eBay integration by

Price: 44.99 USD

Location: Kingwood, Texas

End Time: 2024-08-17T22:50:38.000Z

Shipping Cost: 6.95 USD