Description: 250x122, 2.13inch E-Ink Display HAT For Raspberry Pi, SPI InterfaceOverviewThis is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoSPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUsComes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)SpecificationsOperating voltage: 3.3V/5VInterface: SPIOutline dimension: 65mm × 30.2mmDisplay size: 23.71mm × 48.55mmDot pitch: 0.194 × 0.194Resolution: 250 × 122Display color: black, whiteGrey level: 2Partial refresh time: 0.3sFull refresh time: 2sRefresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170°InterfaceSYMBOLDESCRIPTIONVCC3.3V/5VGNDGroundNCNCDINSPI MOSI pinCLKSPI SCK pinCSSPI chip selection, low activeDCData/Command selection (high for data, low for command)RSTExternal reset, low activeBUSYBusy status output, high activeDimensionsDevelopment ResourcesWiki: http://www.waveshare.com/wiki/2.13inch_e-Paper_HATPackage contains 2.13inch e-Paper HAT x1RPi screws pack (2pcs) x1PH2.0 20cm 8Pin x1123
Price: 19.94 USD
Location: 深圳
End Time: 2024-12-20T04:32:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
Screen Size: 2.13inch
