REPAIR KIT FOR Hayward GOLDLINE GLX-PCB-RITE Salt Chlorine Generator Main Board

Description: COMPLETE “NO SOLDER” DIY REPAIR KIT FOR FAILING AQUARITE CHLORINE GENERATORS When the main circuit board on your salt system fails, your system can no longer effectively sanitize your pool water. This Repair Kit Can Usually Fix 99% Of issue with “NO POWER” Lights ON your Main Panel LED Display. Guaranteed to be compatible with any AquaRite control panel, so you can get your salt chlorinator up and running again quickly. We are so confident in this Kit, We will Provide:60 Days 100% NO HASSLE PREPAID RETURN SHOULD THE KIT NOT FIX YOUR ISSUE. This Exclusive 7 PC Bundle will included all the tools you need for a DIY Repair and Will Include:Original Factory Replacement AmeTherm Thermistor AS32-20R025Wire Cutters (For removing Old Thermistor) MAY BE SHIPPED IN THE BLACK COLORx2 “No Solder” Thermistor Barrel Clamps (Rated at 25A or Higher) 20A Replacement Main Circuit Board Fuse (recommended during Thermistor Replacement)Electrician Insulated Philips #0 Screw Driver Mini Fuse Puller This Product is designed for replacement of a Main Thermistor and 20A Fuse. The Manufacture Replacement Thermistor is Rated at up to 25A, and the Included barrel connectors meet or exceed the 25A Max Rating required for the Thermistor. It is suggested you have a licensed electrician install this Part, DIY installation is done at your own risk. Tis is a repair for your Main PCB Control Borad, and This is not a repair for the Actual Salt Generator (Tubular Canister) portion of your system. The only tool that will be needed for the Repair if removing the board from the Panel is a standard Flathead Screwdriver (Not Included) and needle nose pliers if replacing the Fuse. Buy from the Pros.

Price: 39.78 USD

Location: Sanford, Florida

End Time: 2023-11-08T15:04:30.000Z

Shipping Cost: 0 USD