Description: Our powder coated steel strut spacers are designed to work with your factory Honda suspension to achieve approximately 1.5 inches of lift in the rear. Results vary with aftermarket springs and struts. (please read our FAQ section below)Complete kit includes:2 spacers 1.0 inch rear. (WHY ARE THE SPACERS 1 INCH AND NOT 1.5? Please take a minute to see our FAQ section.) Detailed illustrated installation instructions. Link to installation video Fits 2003-2008 Pilot These spacers do not require the disassembly of the strut. *see our other listings for complete front and rear lift kits. For off road use only! Proudly made in USA! Looking for a lift kit for a 2009 or newer Pilot? Check out our Ebay Store! FAQsQ: "How can you claim to get 1.5 inches of lift from a 1 inch spacer?"A: The rear suspension has geometry that creates additional lift beyond the thickness of the spacer. We measure the lift before and after at the fender lip directly above each wheel. Q: "Is everything I need included in this kit?"A: Everything to install the lift is included in the kit. However, once the car is apart, you may notice there are other parts that could use replacement, especially on high mileage vehicles. We recommend checking for worn, broken, or rusted out parts before beginning the installation. Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1". Q: "Do I need new struts to install this kit?"A: No, this kit is designed to work with all of your factory original parts. It will also work with aftermarket struts but the height results will vary. Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers taller than 2" will require a subframe drop to maintain proper axle angle. Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up. Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important.
Price: 139 USD
Location: Mooresville, North Carolina
End Time: 2023-11-22T15:38:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: HRG Offroad
Type: Spacer
Warranty: Lifetime
Included Hardware: Mounting Hardware
Fitment Type: Performance/Custom
Manufacturer Part Number: HRG-PIL0308LK1.5
Lift Height: 1.5" Rear
Country/Region of Manufacture: United States
Adjustable: No
Placement on Vehicle: Front, Rear
Part Type: Suspension Lift Kit
