Quikrete 990214 Concrete Stucco Plaster Bonding Adhesive 32 oz

Description: New 1 quart bottle of Quikrete's Concrete Bonding Adhesive# 990214item 648974 32 ounce bottle, Quikrete Concrete Bonding AdhesiveQt bottle, concrete bonding adhesive, permanently bonds new concrete, plaster & stucco, eliminates the need for roughing the surface before application, use for bonding applications on concrete overlays 1" or thicker, for interior & exterior applications. Permanently Bonds New Concrete, Plaster & Stucco To Existing Concrete, Plaster Or StuccoEliminates The Need For Roughing The Surface Before Application Use For Bonding Applications On Concrete Overlays 1" Or Thicker For Interior & Exterior ApplicationsMade in USA From the manufacturer: PRODUCT DESCRIPTION QUIKRETE® Concrete Bonding Adhesive is specifically formulated for permanently bonding new concrete or plaster to old concrete or plaster. It is suitable for interior or exterior applications. QUIKRETE® Concrete Bonding Adhesive is also used as the required primer for QUIKRETE® Self- Leveling Floor Resurfacer. PRODUCT USE This exterior grade synthetic emulsion chemically adheres new concrete, toppings and Portland cement plaster or repair material to floors, walls, sidewalks, silos, concrete pipes, concrete pavements, concrete and cinder blocks, curbs and steps. It provides a permanent chemical bond which is stronger than the material being bonded. There is no need for chipping, drilling or roughing the old surface before application. YIELD • As a paint-on adhesive - 35 - 75 ft²/qt (150 - 300 ft²/gal) (3.7 - 7.4 m²/L) • As a slurry coat - approximately 19 ft²/qt (75 ft²/gal) (1.85 m²/L) • As a primer - 300 - 600 ft²/gal (7.4 – 14.7 m²/L) INSTALLATION SURFACE PREPARATION • Apply only to clean, sound surfaces • Remove dust, dirt, oil, grease, wax, unsound concrete and plaster, paint and other foreign materials APPLICATIONS Use As a Paint-On Adhesive • Apply to surface with brush, roller or spray to the thickness of a coat of paint. Can be applied to a dry or damp surface • Place new concrete, topping mixes, Portland cement, plaster mixes or patches as soon as the adhesive is dry. Gypsum plasters and finish plaster should be placed over tacky coat of adhesive • Make sure basecoat plaster is dry before applying adhesive • Tools, brushes and other application accessories should be immediately cleaned with water. Use hot water to clean up any drippings Use As a Slurry Coat • Make slurry from approximately 2 parts cement and 1 part Concrete Bonding Adhesive • Apply a thin layer of slurry onto the properly prepared substrate using a trowel, brush or squeegee, being sure to rub the slurry thoroughly into the surface • Apply topping or repair material immediately before the slurry dries Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Price: 24.99 USD

Location: Westlake, Ohio

End Time: 2024-09-16T17:21:42.000Z

Shipping Cost: 0 USD