Miss Selfridge

Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...

Description: Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at , 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit. About this item If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs. The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at , 30, 45, 60, and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used. To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head. The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from product to product) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit. See more About this item

Price: 76.99 USD

Location: Katy, Texas

End Time: 2024-12-26T20:32:27.000Z

Shipping Cost: 0 USD

Product Images

Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjusta...

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: Unbranded

Department: Mens

Package Dimensions: 18.98 X 4.88 X 2.44 Inches; 0.01 Ounces

UPC: Does not apply

MPN: Details In Description

Recommended

1 DZ D17-1 ADAMS (COLORS & SIZES AVAILABLE), DRY FLIES
1 DZ D17-1 ADAMS (COLORS & SIZES AVAILABLE), DRY FLIES

$5.39

View Details
National Football League NFL Football Sticker Decal S491
National Football League NFL Football Sticker Decal S491

$2.70

View Details
Unbranded Socks Men's Gray New without Tags
Unbranded Socks Men's Gray New without Tags

$4.99

View Details
🔥SUPER FAST⚡-4/5⭐️star Sticker-❄️Read DESCRIPTION
🔥SUPER FAST⚡-4/5⭐️star Sticker-❄️Read DESCRIPTION

$3.25

View Details
Fender 70's Strat Waterslide Guitar Headstock Decals (Set of 3)
Fender 70's Strat Waterslide Guitar Headstock Decals (Set of 3)

$9.70

View Details
RAW Classic 1 1/4 Cones Unbranded | Bulk Box | 1000 Pack
RAW Classic 1 1/4 Cones Unbranded | Bulk Box | 1000 Pack

$102.99

View Details
INTIMACY DECK OF CARDS!!!
INTIMACY DECK OF CARDS!!!

$14.99

View Details
Lot Of 5 Cincinnati Bengals Embroidered Iron On Patch NFL FOOTBALL With B
Lot Of 5 Cincinnati Bengals Embroidered Iron On Patch NFL FOOTBALL With B

$14.99

View Details
Unbranded Design Graphic Socks Unisex One Size Fits All With Free Shipping
Unbranded Design Graphic Socks Unisex One Size Fits All With Free Shipping

$19.99

View Details
BALTIMORE RAVENS IRON ON PATCH
BALTIMORE RAVENS IRON ON PATCH

$3.99

View Details