PIETTA 1860 ARMY PERCUSSION OR CARTRIDGE REVOLVER GRIPS ; 2P IVORY SCROLL ENGR.

Description: Normal 0 false false false EN-US X-NONE X-NONE Arizona Custom Grips Pietta 1860 Army These grips are for the Pietta Cap & Ball and Cartridge Revolvers with the 3-1/2” tall 1860 Army sized gripframe. ~see below for details~ ~ Exclusive ~ MAGNA-TUSK™ white ivory GRIPSScrollwork engraved Milled out of a solid block of Magna-Tusk™, denser and heavier than regular Ivory or Stag. See below for details. ~~~~~ two-PIECE (with SCREWHOLE) STYLE grips THIS LISTING IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS ******** ONE-PIECE VS. TWO-PIECE STYLE GRIPS EXPLAINED: Note: One-Piece style grips do not use a screw but instead use an internal spacer. Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. We manufacture both types. Both styles of our grips will interchange and work on either style of grip frame, no matter how your revolver is currently set up. Both styles are traditional and historical designs and both were originally used on early Colts, so whichever style you choose is really a matter of personal preference. One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user-installed spacer between the grip panels, as seen on many of the early Colts. The spacer (included with your grips) is sent unmounted to ensure the optimum fit to your particular frame. Installation is simple and takes only a few minutes, and is explained in the included instructions. This results in a rock-tight fit, without the need of a screw. One-Piece grips are preferred by many collectors for their clean lines and traditional look. Once mounted, they are taken on and off by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw) offer the superior convenience of quick grip removal. In addition to the screw our Two-Piece style grips include a free Conversion Kit, allowing their use on revolvers that are currently set up for One-Piece style grips that do not have a grip pin (as is the case with most Italian revolvers). The Conversion Kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many shooters and collectors. Fully illustrated, easy-to-follow instructions are included with every order. Rev 23120102 ~~~~~ WHAT THESE WILL FIT: (Note: Please read these paragraphs thoroughly, including the “Will NOT Fit” section below): These grips are correctly milled and detailed to fit the following Pietta revolvers, which are fitted with the 3-1/2” tall 1860 Army sized gripframe, which are imported and marketed through Cimarron, Taylor’s & Company, EMF, Navy Arms, etc. Please note that these will NOT fit shorter (Navy sized) gripframes which measure around 3-1/16” to 3-1/8” tall. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. WILL FIT THE FOLLOWING: Pietta Blackpowder (Percussion) Revolvers with the 3-1/2” tall 1860 Army gripframe: * Pietta 1860 Army .44 Caliber Blackpowder (Cap & Ball Percussion) revolvers; * Pietta 1851 Navy Blackpowder Revolvers with the 3-1/2” tall 1860 Army sized gripframes. These are usually chambered in .44 Caliber and have a steel gripframe. Please note that these will NOT fit the ‘51 Navys with the more common, shorter Navy gripframes, which measure around 3-1/8” tall. Your gripframe must be 3-1/2” tall for these to work. Pietta Cartridge Revolvers with the 3-1/2” tall 1860 Army gripframe: * Traditions/Pietta Frontier .44 Magnum (and a few .357 Magnum Frontiers using the taller 3-1/2” 1860 Army grip frame); * EMF/Pietta Great Western II Alchimista I, II, or III. *Please note that these will NOT fit the other Great Western IIs which use the shorter 3-1/8” gripframe; * Cimarron/Pietta El Malo II with 3-1/2” Tall “plowhandle” style gripframe *(NOTE: these will NOT fit the El Malo II with the “Birdshead” style gripframe, which is a completely different grip shape. They will also NOT FIT the El Malo I which has the shorter 3-1/8” Navy sized frame). * Cimarron/Pietta Eliminator; *Taylor’s & Co./Pietta TC9 revolvers with the 3-1/2” Tall gripframe. (NOTE: these grips will ONLY fit the TC9 with the 3-1/2” tall 1860 Army sized gripframe with Checkered Walnut grips. These will NOT fit the TC9 with the shorter 3-1/8” tall gripframe with Black Checkered Plastic grips; * AND ALL other Pietta revolvers using the 3-1/2” tall 1860 Army sized grip frame. Please contact us if you have any questions, or cannot find the proper grip, and we will be happy to help. WILL NOT FIT: These grips are made to fit ONLY Pietta revolvers, and will NOT fit anything made by Uberti, Armi San Marco, Colt, or any other manufacturer. If you have one of these other makes of revolvers and cannot find the grip you need, please contact us and we will be happy to help. Also, please note that these will NOT fit the Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style revolvers, which incorporate a completely different shaped gripframe than the grips shown in the pictures. Custom fitting to your frame is also available. Please contact us for more information. Rev. 23120145 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us. Full money back, less shipping, if not fully satisfied!!

Price: 94.95 USD

Location: Mesa, Arizona

End Time: 2024-08-03T19:09:55.000Z

Shipping Cost: 5.99 USD