Pick One, 10.5 V-28 V DC MPPT GRID TIE INVERTER 60 HZ 110 V-120 V~190 V-240 V AC

Description: GreenergyStar Grid Tie Inverters Please choose one Greenergystar grid tie inverter: 300W, 400W, 400W MPPT, 600W MPPT MPPT to Enhance Power Output by 30%! 400W MPPT Grid Tie inverter Feature: ALL Models has LED cycling motion Second Generation Normal Operation AC Disconnected / Fault - Unique and intuitive display design - LED cycling in circular formation - Represent electric meter spinning backward and power is being output to the grid - Smooth motion - Grid-Tied - sell green power directly back to the grid at a premium rate (depends on your location) - NEW Maximum Power Point Tracking (MPPT) algorthim to optimize power output - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - 60% enhanced in power output compare to first generation inverters - 38% better in space utilization and 51% better in Weight Reduction with higher quality parts - Unique and intuitive LED display design to reflect power output rate - External 30A Fuse for easy maintenance - Automatic 110V - 220V AC voltage switch, NO MORE manual hassle - Wider DC Input Voltage Range, from 10.8V ~ 28V compare to 1st generation's 14V ~ 28V - Allow MORE types of power source to be connected (ie: Air-X, 12V battery, and etc.) - Aluminum enclosure will act as heat sink to help dissipate heat - Stackable (connect in parallel for higher output) - Island protection: Inverter will shut down during black outs. - Simple and safe installation - Reverse polarity protection - Generates pure Sine Wave - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads - Does not require rewiring of existing electronics - Compact and light weight design Electrical Specifications - Output: Model GP2A-400 AC Output Power 400W Maximum AC Output Power 100 ~260V Auto Switching Frequency 46Hz - 65Hz Total Harmonic Distortion (THD) <5% Power Factor 0.99 Island Protection Yes, inverter shuts down during black out Output Current waveform Pure Sine Wave Electrical Specifications - Input: DC Input Voltage (Solar & Wind) 10.8V - 28V Peak inverter efficiency 92% Over-current protection 30A Reverse Polarity Protection Yes Power consumption (Standby) 0.9W Stackable Unlimited as long as it doesn't exceed main circuit amperage limit Mechanical Specifications: Operating temperature range -20'C - 65'C Weight 1.27kg 2.65lb Dimension (L x W x H) 16.3 x 15.4 x 5.7 cm 6.3" x 6.10" x 2.25" Mounting Wall Mount at base AC Cable Length 1.5m Cooling Convection cooled with fan Display 1 Red and 6 Green LED What are included: - One GreenergyStar GP2A-400 Hybrid Grid-Tied Inverter - One spare 30A fuse - One 1.5m North America Standard AC Cable - Instruction Manual 600W MPPT Grid Tie inverter Feature: Maximum Power Point Tracking (MPPT) - optimize power output 50% enhanced in power output compare to second generation inverters Unique and intuitive LED display design to reflect power output rate Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller (ie: Air-X, 12V battery, and etc.) General Features: Grid-tied - sell green energy back to the utility at a premium rate Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics Automatic 110V - 220V AC voltage switch Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave Reverse polarity protection Stackable (connect in parallel for higher output) Maximum input power: 600W (rated at 16.6V and 36A) System Voltage: 12V Nominal (see input / output sections for range) 2x External 30A fuse for easy maintenance Internal diode to prevent reverse current to solar panels or wind turbine at night High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat Microprocessor based control electronics to regulate input and output What are included: 1X Grid Power 3 grid-tie inverter 1X 1.5m North America Standard AC Cable Instruction manual Installation: Connects directly to Nominal 12V Solar Panels Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging Connect the included cable to the inverter, and then connect the other end to a wall socket. Warning! Reverse polarity in input will blow fuse and possibly damage the inverter. Damages caused by reverse polarity is not covered by the warranty Output Specifications: Model GP3 Maximum AC Output Power 600W AC Voltage Range 100V ~ 260V Auto Switching Frequency 45Hz ~ 65Hz Over current protection Yes, firmware controlled Total Harmonic Distortion (THD) <5% Power Factor 0.99 Anti Island Protection Yes, Inverter will disconnect from grid during black out Output Current Waveform Pure Sine Wave Input Specifications: Starting Voltage 12.8V Drop out Voltage 10.5V Operating Voltage Range 10.5V ~ 30V Standby Voltage 8V ~ 10.49V Shut Down Voltage <8V Withstand voltage 48V (anything above will damage inverter) Maximum Input Current 38A Over current protection 60A Fuse Reverse Polarity Protection Above 60A will blow fuse. Under 60A will heat up internal electronics. Disconnect immediately do avoid damage Stand-by power consumption <1W Mechanical Specifications: Operating temperature range -20'C - 65'C Weight 1.17kg 2.6lb Dimension (L x W x H) 19.3 x 16.5 x 5.4 cm 7.5" x 6.5" x 2.1" Mounting Wall Mount at base AC Cable Length 1.5m Cooling Convection cooled with fan Casing High quality finned aluminum to act as heat sink for fast heat dissipation Display 6 Green, 1 Orange and 1 Red LED 400W Grid Tie inverter Feature: - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - 60% enhanced in power output compare to first generation inverters - 38% better in space utilization and 51% better in Weight Reduction with higher quality parts - Unique and intuitive LED display design to reflect power output rate - External 30A Fuse for easy maintenance - Automatic 110V - 220V AC voltage switch, NO MORE manual hassle - Wider DC Input Voltage Range, from 10.8V ~ 28V compare to 1st generation's 14V ~ 28V - Allow MORE types of power source to be connected (ie: Air-X, 12V battery, and etc.) - Aluminum enclosure will act as heat sink to help dissipate heat - Stackable (connect in parallel for higher output) - Island protection: Inverter will shut down during black outs. - Simple and safe installation - Reverse polarity protection - Generates pure Sine Wave - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads - Does not require rewiring of existing electronics - Compact and light weight design Electrical Specifications - Output: Model GP2-400 AC Output Power 400W Maximum AC Output Power 100 ~260V Auto Switching Frequency 46Hz - 65Hz Total Harmonic Distortion (THD) <5% Power Factor 0.99 Island Protection Yes, inverter shuts down during black out Output Current waveform Pure Sine Wave Electrical Specifications - Input: DC Input Voltage (Solar & Wind) 10.8V - 28V Peak inverter efficiency 92% Over-current protection 30A Reverse Polarity Protection Yes Power consumption (Standby) 0.9W Stackable Unlimited as long as it doesn't exceed main circuit amperage limit Mechanical Specifications: Operating temperature range -20'C - 65'C Weight 1.27kg 2.65lb Dimension (L x W x H) 16.3 x 15.4 x 5.7 cm 6.3" x 6.10" x 2.25" Mounting Wall Mount at base AC Cable Length 1.5m Cooling Convection cooled with fan Display 1 Red and 6 Green LED What are included: - One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter - One spare 30A fuse - One 1.5m North America Standard AC Cable - Instruction Manual 300W Grid Tie inverter Feature: (Model: SSI-300) Grid Tie Inverter Video Demo What is Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility's electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W ~ 5000W) category. Their prices ranges in the thousand's range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. All that has to be done is connect your DC Sources (Solar Panels or Wind Turbine) to the inverter, and use the included cable (North American standard) to connect to any home AC electrical outlet, and you are feeding/selling green energy back into the grid at a premium rate (subject to local policies). This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Electrical Specifications - Output: Model SSI-300 Nominal AC Output Power 250W Maximum AC Output Power 300W AC output voltage range 100 ~130V ONLY Frequency 46Hz - 65Hz Total harmonic Distortion (THD) <5% Power Factor 0.99 Island Protection Yes, inverter shuts down during black out Output current waveform True sine wave Electrical Specifications - Input: DC input voltage range 10.8V - 26V Peak inverter efficiency 91% Over-current protection 30A Reverse Polarity Protection Yes Power consumption (Standby) 1W Stackable Yes, unlimited Mechanical Specifications: Operating temperature range -20'C - 65'C Weight 1.16kg 2.56lb Dimension (L x W x H) 16.3 x 15.4 x 5.7 cm 6.3" x 6.10" x 2.25" Mounting Wall Mount AC Cable Length 1.5m Cooling Convection cooled with fan Display 1 Red and 6 Green LED Features: - Grid-Tied - sell green power directly back to the grid at a premium rate (depends on your location) - Maximum Power Point Tracking (MPPT) - optimize power output - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - Stackable (connect in parallel for higher output) - Island protection: Inverter will shut down during black outs. - Simple and safe installation - Reverse polarity protection - Generates pure Sine Wave - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads - Does not require rewiring of existing electronics - LED indicators to reflect power output rate - Compact and light weight design - RoHS Compliant What are included: - One Enviro-techs SSI300 Grid-Tied Inverter - One 1.5m North America Standard AC Cable - Instruction Manual View our other grid tie inverters in our eBay store: Additional information about grid tie inverters: What is Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility's electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W ~ 5000W) category. Their prices ranges in the thousand's range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. All that has to be done is connect your DC Sources (Solar Panels or Wind Turbine) to the inverter, and use the included cable (North American standard) to connect to any home AC electrical outlet, and you are feeding/selling green energy back into the grid at a premium rate (subject to local policies). This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Non- Reusable Power being consumed today Reusable Power being generated for a better tomorrow and a brighter future What is Maximum Power Point Tracking (MPPT)? What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current, V is the Voltage, and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions Figure 3. Sunny, Clear Sky days in Summer 600 ~ 1000 W/m2 No MPPT MPPT Power 80.5W 84.15W Color Red & Yellow Yellow& Green Percent N/A +4.5% Figure 4. Scattered Clouds or Partly Cloudy days in Summer 300 ~ 600 W/m2 No MPPT MPPT Power 42.0W 46.4W Color Red & Yellow Yellow& Green Percent N/A +10.5% Figure 5. Cloudy or fog days, dawn or dusk in Summer 100 ~ 300 W/m2 No MPPT MPPT Power 5.25W 14.25W Color Red & Yellow Yellow& Green Percent N/A +171% Figure 3 - 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. Installation: Figure 1: AC Power Figure 2: DC Input Install in a low humidity and well-ventilated area. Remove all flammable objects. Connect the Solar Panel, Battery or Wind Turbine's DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1. Warning! Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. Warranty: We will warrant this unit against any manufacture defects or workmanship for 6 months from the date of purchase. This limited warranty specifically excludes damage caused by improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND Terms & Conditions Bidding this auction means that you agree with the following terms & conditions. All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors. Payment Total payment = winning price + shipping & handling Insufficient payment will be charge extra US$0.50 to compensate the Paypal penalty fees. Shipping & Handling Total shipping = Base S&H + Combine S&H ( for each additional item ) a) Base S&H is the highest shipping cost of the first item. 1. Combine shipments are only available on the condition of a SINGLE PAYMENT. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts. 2. We ship within 2 working days after payment is received and confirmed. Please allow up to 5-10 BUSINESS DAYS for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location. 3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees. 4. We are not responsible for any loses or damages resulting from shipping. Return & Refund Policy No refunds after 30 days Shipping & handling & other service fees are NOT refundable All returned items must be in original packing. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. A 20% restocking fee will be charged on all refunded items. E-mails E-mails are usually answered within 2~3 business days in priority order. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted.

Price: 84 USD

Location: Point Roberts, Washington

End Time: 2024-08-16T05:19:58.000Z

Shipping Cost: 0 USD