Patient Monitor with ETCO2, ECG.SPO2.HR,NIBP,RESP,Temp for Cat,Dog, Animals use

Description: Veterinary Multi parameter patient Monitor For ECG SPO2 NIBP TEMP RESPFeatures: 1.12.1 inch color LCD screen, full view display, high resolution 1024×768dpi;2. Standard parameters: ECG, SpO2, NIBP, RESP, Temperature, Heart Rate;3.Blood pressure hardware and software double overpressure protection to ensure the safety of monitoring;4. No fan design, avoid hair debris involved in the equipment, no cross infection, to protect the health of animals and doctors;5. The weak perfusion technique developed according to the characteristics of animal pulse in blood oxygen measurement has excellent anti-interference6. Standard animal special accessories to meet different animal sizes;7.NIBP uses pulse wave measurement technology to display the measurement process in real time, and has absolute judgment basis for the accuracy of the measurement results. 8.It has the function of intravenous assisted puncture and punctuality measurement9. Frequency response 0.05-150Hz, heart rate measurement limit of 500 times/min;10. Support ≥36 hours ECG waveform playback;11. Simple and efficient interface display, standard interface, large font, respiratory oxygenation chart, trend coexistence, 7 leads ECG with the same screen;12. Visual alarm function, improve monitoring efficiency;13. Parameter color adjustment function, the operator can customize waveform, font color;14. The alarm tone and pulse rate tone are independent, the pulse rate tone continues to correspond when the alarm is muted, and the alarm tone can be activated normally when the pulse rate tone is muted. 15. Anti-defibrillation, electrotome, power grid, myoelectric interference;16. Large capacity built-in lithium battery, continuous working time ≥240 minutes;17. Low battery alarm, data will not be lost at key moments;18. Large storage capacity: at least 800 hours of continuous monitoring of animals to meet the data storage requirements;19. Optional built-in thermal matrix recorder, three trace waveform;20. Very short boot time 6 seconds to enter the working state;21. Reserve ETCO2 interface to support plug and play CO2 module; Standard configuration: ECG, SpO2, NIBP, RESP, Temperature, Heart Rate;Optional configuration: Printer, 3/5 leads ECG,ETCO2Warranty information:Main machine 2 years, accessories 6 months Packaging information: Monitor packaging size: 40*28*35 cmWeight: 5.8kgMain machine size and weightMain machine size 334±1mm(L) × 155±1mm(D) × 255±1mm(H)N/W: 3Kg (standard, without battery, without accessories)GW: 3.15Kg (standard, including battery, not including accessories)Standard parameters:Ecg:Lead selection: three/five lead standard; Up to 7 guides can be displayed on the same screenI, II, III, AVR, AVL, AVF, V thoracic leadsEcg value detection range: 20~500bpm Standard parameters:ECG: Lead selection: 3/5 lead standard; Up to 7 leads can be displayed on the same screenI, II, III, AVR, AVL, AVF, V thoracic leadsECG value detection range: 20~500bpmResolution: 1bpmMeasurement accuracy: ±2% or ±2bpm greaterFrequency response: 0.67Hz-150HzST segment monitoring: -2.5mV~2.5mVST segment measurement accuracy: within the range of -0.8mV ~ + 0.8mV ± 0.02mV or ± 5% of the reading, take the one with the greater absolute value. Waveform speed: 6.25, 12.5, 25, 50mm/sGain selection: ×0.125, ×0.25, ×0.5, ×1, ×2, ×4, automaticProtection isolation withstand 4000V/AC/50Hz voltage;Ecg cable guide: 3/5 leadsStandard configuration: 5 leads electrical cable, multifunctional ECG electrode clampAlarm value: upper and lower limits can be set, automatic memory,have alarm review; SPO2Blood oxygen range: 0%-100%Resolution: 1%Accuracy: ±2% (not defined below 70%)Pulse Rate:Measuring range: 30 ~ 254bpmPulse accuracy: ±2bpm or ±5%Standard: animal use SPO2 probeAlarm value: upper and lower limits can be set, automatic memory NIBP:Method: OscillometricMeasuring parameter: Systolic pressure, Diastolic pressure, Mean pressureWorking mode: manual, automatic, continuous, whole point measurementAutomatic measurement mode measurement interval: 1~480min multi-stage adjustableMeasuring range: Mode 1Mode 2Mode 3SYS（mmHg）30~27030~27030~135DIA（mmHg）10~22010~22010~110MEAN（mmHg）10~22010~22010~110 Typical measurement time: 25 seconds (manual or automatic mode)20 seconds (continuous mode)Cuff pressure range: 0-300 mmHgCuffStandard configuration: disposable animal cuff (Range 4-8cm, Range 6-11cm, Range 7-13cm, Range 8-15cm) Optional configuration: Disposable animal cuff (other specifications required by customers) TEMP:TEMP measurement range: 15℃ ~ 50℃Temperature measurement error: not more than ±0.1℃Resolution: 0.1℃Accuracy: ±0.2℃ (including sensor error)Probe:Standard: Body cavity temperature probeOptional configuration: body surface temperature probe, disposable temperature probe. Alarm value: upper and lower limits can be set, automatic memory RESP:Measurement method:the thorax impedance methodPR Measurement Range and AccuracyMeasuring range: 0~ 150rpm. Measurement accuracy: 10~150 rpm the bigger one between ±2 rpm or ±2%; 0~9 rpm not define. whichever is larger;Suffocation alarm delay timeRI alarm limitAlarm limit can be set to: 2~150rpm Noted : Alarm: All monitoring parameters can be alarm Settings, and has an alarm device that emits sound and light, and can cancel the alarm. Frequency response0.05-150HzMonitor ParametersECGScreen Dimensions12.1inch color LCD screenMPNDoes not applyModelHM10Standard parametersETCO2,ECG, SpO2, NIBP, RESP, Temperature, Heart Rate;BrandDAWEIheart rate measurement limit500 times/minBoot speed10S

Price: 799 USD

Location: KS

End Time: 2024-08-24T00:48:40.000Z

Shipping Cost: 0 USD