PAC RP5GM51 Onstar Radio Interface/Steering Wheel Control ’14-’19 Chevy/Gm

Description: An all-in-one radio replacement and SWC interface, the innovative RadioPRO5 comes pre-loaded with OnStar retention, SWC software, navigation based output signals and other features that save time and money during installation. Combines OS-4 & SWI-RC Interface Retains OnStar Telematics system Retains original steering wheel control functions with the radio with no additional interface or programming needed Retains factory WiFi system Retains front and rear park assist Retains all warning chimes (chime module included) Retains OEM Auxiliary Input Antenna adapter included Additional part CAM-GM51 required to retain factory reverse camera Data controlled outputs for connection to your navigation radio; speed, reverse and parking brake status output wires Data controlled RAP accessory output Works right out of the box with most radio brands Keeps vehicle data bus intact for service Interface can be quickly updated if needed from the PAC website using a PAC-UP USB adapter Compatibility Notes: Does not retain factory satellite radio PAC-UP required to configure vehicle settings 2016+ vehicles with RPO codes IOA or IOB must also use the RP5-GM52-HAR. RPO codes can be found on a silver sticker either in the glove box or in the trunk near the spare tire well. 2015 + Colorado/Canyon must use Revision 1.1.4 or higher and Vehicle Settings revision 2.0.7 or higher 2015 + Tahoe/Suburban/Yukon must use Revision 1.1.3 or higher and Vehicle Settings revision 2.0.6 or higher. You must use Interface Updater 2.0 to update an RP5-GM51. Chevrolet Impala: Not compatible in vehicles with the IO3 RPO code. RPO code must be IO5 or IO6. RPO codes can be found on a silver sticker in the trunk near the spare tire well.

Price: 178.99 USD

Location: Muncie, Indiana

End Time: 2024-12-10T18:24:43.000Z

Shipping Cost: 0 USD