Description: Good used - Tested. This Suntec A2RA 7738 Waste Oil Pump & Motor Assembly with filter is in good used condition. We have tested it rigorously; we test all our pumps with thin diesel fuel, not heavy motor oil; they are pressure and vacuum tested to make sure they pass inspection; the output pressure is tested to make sure it's 100 psi and must have a good flow; we also pressure and vacuum test the shaft seal and run the pump with the inlet side closed off to make sure it will pull down to a minimum of 20 inches of vacuum; many used pumps in the industry do not pass this test at all; we've tested lots of pumps---we know. Only good quality pumps pass this test. We also check to make sure they run quietly. We also oil the pump motor bushings and check the drive coupling to be sure everything is correct and tight as applicable. This pump can be used on most any brand waste oil furnace/heater. If you need to know if it will work on yours, contact us before bidding. These pumps also work well to transfer oil from an outside tank to an inside tank, etc. They move oil slowly and will not stir up the mud in the bottom of your tanks. If you use it to transfer oil, we recommend that you install a timer, so that it will not overfill your tank (timer not included); and then set the timer to run when someone is in the shop and fill it only partways (1/2 to 3/4 full) to eliminate any oil spill. Includes a vacuum gauge on the suction filter. Does not include 90° brass fitting on suction side of filter, even though shown in some pix. See below. Track Page Views With Auctiva's FREE Counter
Price: 348 USD
Location: Millersburg, Ohio
End Time: 2024-09-02T17:10:43.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Pump: Suntec
Type: Waste oil pump
Manufacturer Part Number: Pump model: A1RA 7738
