NEXX Racing Precision CNC 7075 Round Motor Mount for 90-94mm RM (Orange) NX-066

Description: NEXX Racing Precision CNC 7075 Round Motor Mount for 90-94mm RM (Orange) NX-066 DESCRIPTION\nNew NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03RM/ MR02RM/015 RM (wheelbase 90mm to 94mm). NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6\nSpecifications:\nWeight: 5.1g (without T-plate)\nDesigned for Kyosho Mini-Z 90 and 94mm RM chassis ( 90mm to 94mm wheelbase rear motor ), 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)\nFeatures:\nLowest CG motor mount on the market\nThe new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.\nLightest motor mount on the market\nBesides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 5.1g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.\nInnovative slot design to allow easy adjusting gear mesh\nAdjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.\nInnovative carbon support design\nNEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.\nFree carbon fiber T-plate\nNEXX Racing motor mount also comes with a free high quality carbon fiber #5T-plate. Free of charge\nFree alu 7075-T6 damper posts\nNEXX Racing motor mount also comes with alu damper posts free of charge.\nEasy center shock height adjustment\nNEXX Racing motor mount offers the ability to adjust the height of center shock.\nThe package includes:\n1 x Precision CNC SWISS 7075 T6 aluminum motor mount\n4 x eccentric bearing holders to allow height adjustment of the motor mount.\n1 x alu damper post\n1 x carbon fiber T-plate #5 (strongest) NEXX Racing Precision CNC 7075 Round Motor Mount for 90-94mm RM (Orange) NX-066 DESCRIPTION\n New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03RM/ MR02RM/015 RM (wheelbase 90mm to 94mm). NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6\n Specifications:\n Weight: 5.1g (without T-plate)\n Designed for Kyosho Mini-Z 90 and 94mm RM chassis ( 90mm to 94mm wheelbase rear motor ), 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)\n Features:\n Lowest CG motor mount on the market\n The new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.\n Lightest motor mount on the market\n Besides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 5.1g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.\n Innovative slot design to allow easy adjusting gear mesh\n Adjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.\n Innovative carbon support design\n NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.\n Free carbon fiber T-plate\n NEXX Racing motor mount also comes with a free high quality carbon fiber #5T-plate. Free of charge\n Free alu 7075-T6 damper posts\n NEXX Racing motor mount also comes with alu damper posts free of charge.\n Easy center shock height adjustment\n NEXX Racing motor mount offers the ability to adjust the height of center shock.\n The package includes:\n 1 x Precision CNC SWISS 7075 T6 aluminum motor mount\n 4 x eccentric bearing holders to allow height adjustment of the motor mount.\n 1 x alu damper post\n 1 x carbon fiber T-plate #5 (strongest) × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Rakon CNC AL Propeller Guards (Green) - Blade Inductrix 31mm Rakon CNC AL Propeller Guards (Orange) - Blade Inductrix Rakon CNC AL Propeller Guards (Purple) - Blade Inductrix Rakon CNC AL 6mm Motor Mount Set - Blade Inductrix IDTX601 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Excel RC Postage Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. Additional Information: Returns Accepted, Buyer, 30 Days, Money Back, International: Returns Accepted, Money back or replacement (buyer's choice), 30 Days, Buyer eBay integration by

Price: 45 USD

Location: Garden City, Michigan

End Time: 2024-08-13T14:30:30.000Z

Shipping Cost: 0 USD