NESRGB N64RGB ATARI2600RGB SMSFM YPbPr YUV KITS DIY

Description: NESRGB in stock ! N64RGB in stock ! - I also sell "click in" 3d printed Multiout ports with PCB (like on the back of a SNES / NGC / FamicomAV) maybe this would be useful for you, see my other items. All of these products have come direct from Tim Worthington - no fakes, just genuine parts. - NESRGB v4 now available ! redesign and re-write of code, more palettes, in-game-routines (reset and palette change). - N64RGB v3 now in stock. Supports component output now. Great work on the new version Tim :) Ask me if you want Famicom original (more expensive) or Sharp Twin Famicom as I may be able to help, if I have stock at the time. NESRGB-FrontLoader- NESRGB v4 PCB + parts required for Front Loader (grey) NES NESRGB-FamicomAV-NES2- NESRGB v4PCB + parts required for top loader's eg Famicom AV, PAL NES2 or NTSC NES2. N64RGB (NOW v3)- N64RGB PCB v3 (includes Borti's firmware pre-loaded on there for extra functionality!) NOW supports COMPONENT / YUV / YPbPr OUTPUT !!!! (via closing a pad on the board) N64RGB-incl-adapter (NOW v3)- N64RGB PCB v3 + small pitch adapter for smaller DAC chip (includes Borti's firmware pre-loaded on there for extra functionality!) NOW supports COMPONENT / YUV / YPbPr OUTPUT !!!! (via closing a pad on the board) 2600RGB-4button- Atari 2600 RGB PCB + parts required for 4 button Atari's SEGASMSFM- SMSFM Kit + parts required to get your SMS playing FM sound (also includes the ability to switch your console to JAP "Sega MarkIII" simulation via some clever programming COMPONENT-YUV-KIT- you can use this kit almost on ANY old retro console, but you need Red, Green, Blue and Y (luminance) available. This kit will convert the RGBs output of Atari2600, NESRGB etc to component/YUV/YPbPr video ! Please feel free to contact me if you have any questions. I can also provide INSTALLATION SERVICES for any of the above, or other retro consoles, just message me to discuss. I also sell some other cool parts made by Tim Worthington such as his VGA to SCART adapter and 8 pin mini din to SCART adapters. Check out my other items. These items need to be installed into your console. Once you touch these items with a soldering iron, I cannot accept returns. You MUST be able to solder and be confident soldering before attempting this - or ask me, if you wish to post your console to me I can install for you. I am a recommended installer of Tim's great range of RGB (etc) boards. Thanks for looking

Price: 33 AUD

Location: Chatswood, NSW

End Time: 2023-10-02T12:22:57.000Z

Shipping Cost: 18.7 AUD