NES Power Module - NESRGB "Companion" Board V3.1c

Description: I had some made for my own project, and wanted to sell some of my extras, these boards work great. Features of the 3.1c Boards-Stable and clean 5.06 volts at a 1.5A load. (7.5 watts)-Tested for 24 hours at a 1.8A load (9 watts)-1.5A Resettable Fuse on 9V input for board protection. (13.5 watts)-The LCSC Chinese Voltage Regulator has been replaced with a TE Connectivity IC. (TPS54202H)-The Full Bridge Rectifier is a Diode Incorporate part. (MSB30M)- Now a 4 Layer Board for close GND Coupling of the switching frequency.- GND Connection has been moved closer to the voltage regulator to reduce the GND Loop.- The Power Switch only enabled the Voltage Regulator now, the input voltage does not travel through the switch.- Moved the Inductor away from the interconnect pins and added more bypass capacitors for more noise suppression. *** Use at your own risk no warrenty*** Installation Instructions can be https://github.com/ShawMerlin/NES-Power-Module-Redesign/blob/main/Install_Instructions.md Instructions for hooking up to the RGBNES Board.https://github.com/ShawMerlin/NES-Power-Module-Redesign/blob/main/RGB%20-%20Genesis%209%20Pin%20Edition/Features%20and%20Components.md

Price: 59.99 USD

Location: Port Arthur, Texas

End Time: 2024-12-01T19:51:50.000Z

Shipping Cost: 4.63 USD