N52 6mm dia x 2mm small Neodymium disk magnets craft fridge DIY MRO small packs

Description: eBay Store Design by Visualsoft Home About Us Our Feedback Shop Categories Craft / Ferrite -make your own Flexible - strip, paper, signs Whiteboard / Fridge Magnets Magnet Testing Equipment Neodymium Blocks Neodymium Disks / Rods Neodymium Cubes Neodymium Rings Neodymium Spheres Neodymium - Self Adhesive Neodymium N52 - High Grade Neodymium High Operating Temp AlNiCo (Alcomax) Samarium Cobalt Fuel Magnets Limescale Magnets Magnetic Therapy Magnetic Toys Pot / Anchoring Magnets Special Offers Made In UK Arc Segments Other N52 6mm dia x 2mm small Neodymium disk magnets craft fridge DIY MRO small packs Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 6 mm (0.23") Thickness: 2 mm (0.07") Weight: 0.418g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.98lb / 32oz / 899g Calculated Max Vertical Hold-guidance only: 0.39lb / 6.4oz / 179g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Ask a Question Description These are ideal for a large range of hobby crafting including card crafting and scrapbooking. They are also good for DIY and MRO uses. If you need to use an adhesive, we recommend using something that will bind to metal and whatever surface you want to glue the magnet to. The pull is calculated using a mathematical formula and is, therefore, the theoretical maximum hold between one magnet and a mild steel plate. It does not take account of manufacturing tolerances, plating, plating thickness or variances in a mild steel plate. The vertical hold is based upon the calculated pull and is, therefore, only for guidance. Factors such as paint thickness, plasticised surfaces, movement and vibration are not taken into account. WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST Home About Us Our Feedback Contact Us eBay Store Design by Visualsoft These are ideal for a large range of hobby crafting including card crafting and scrapbooking. They are also good for DIY and MRO uses. If you need to use an adhesive, we recommend using something that will bind to metal and whatever surface you want to glue the magnet to. The pull is calculated using a mathematical formula and is, therefore, the theoretical maximum hold between one magnet and a mild steel plate. It does not take account of manufacturing tolerances, plating, plating thickness or variances in a mild steel plate. The vertical hold is based upon the calculated pull and is, therefore, only for guidance. Factors such as paint thickness, plasticised surfaces, movement and vibration are not taken into account. WARNING: Neodymium magnets are unsuitable for children under 8. All neo

Price: 33.49 USD

Location: SN101XA

End Time: 2024-12-22T19:27:04.000Z

Shipping Cost: 0 USD