MOSKY Guitar Multi Effect Pedals Full up to Date List ✅ New

Description: MOSKY Guitar Multi Effect Pedals Full up to Date List ✅CRUNCH RED DistortionHigh-quality distortion guitar effect pedal.4 functional knobs(VOL./GAIN/PRES/TONE) for adjusting the performance of the overdrive effect.True bypass footswitch for switching between distortion effect and bypass status.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable.Input: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Package List:1 * Guitar Effect PedalB-Box Pre-amp OverdriveElectric guitar preamp overdrive effect pedal for guitar players. 4 functional knobs(Gain/Volume/Bass/Treble) for adjust the performance of the overdrive effect. True bypass footswitch for switching between chorus effect and bypass status. LED light for indicating effects or bypass status. Full metal shell and compact size, durable and portable. Specifications: Input: 1/4" monaural Jack Output: 1/4" monaural Jack Power Supply: DC 9V AC adapter (center minus plug)(not included)Spring Reverb MP-51 Boasting a super small size with low noise, and a near bottomless depth of spring reverb sound. Mix pot to balance dry/wet degree. Dwell pot for adjusting bit reduction rate. True bypass switch achieves zero-loss of tone, with a LED indicator to state working condition. Single 1/4″monaural input and output jacks, 9V DC adapter power supply, current draw is 85mA. Effect Type: Spring Reverb Material: Metal Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9VNANO 8 Isolated Power SupplyPower supply for guitar effects. With 8 isolated DC outputs: 7 * 9V and 1 * 12V. Mini size and lightweight, easy to carry and store. Made of high-quality zinc-aluminum alloy, durable and sturdy. Comes with power adapter and power cables. Power Input: 15V, 1000mA Power Output: 6 * 9V each max. 150mA 1 * 9V max. 500mA 1 * 12V max. 100mA Total Output Current: max. 1000mA from 8 channels Power Adapter: US Plug Item Size: 3.5 * 9 * 3cm / 1.4 * 3.5 * 1.2in Item Weight: 114g / 4oz Package Size: 10 * 21.2 * 6cm / 3.9 * 8.3 * 2.4in Package Weight: 395g / 13.9 What in the box: 1 * Power Supply 1 * Power Adapter (US) 8 * Power Cables BROWN Dual Toggle DistortionHigh-quality distortion guitar effect pedal with true bypass. 2 switches: Vintage/Modern Switch & Boost Switch; --Vintage/Modern Switch: for setting the overall voicing of the pedal's frequencies, to be either darker with a classic tonality or brighter and more modern. --Boost Switch: for altering the internal gain structure of the pedal to bring much more drive, heavier and more aggressive distortion. 4 control knobs: Tone, Contour, Volume and Gain; --Tone: for adjusting the frequency emphasis on the highs. It interacts substantially with the Contour knob and Vint./Modern switch. --Contour: for adjusting the frequency emphasis overall. It interacts substantially with the Tone knob, and is affected by the Vint./Modern switch as well. --Volume: for adjusting the output level. There's plenty of volume on tap in either standard or Boost mode. --Gain: This control, in conjunction with the Boost switch, lets you dial in anything from a classic, almost laid back early rock tone all the way to modern high-gain. With LED light for indicating effects or bypass status. Compact size with full metal shell, portable and durable. Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9V adapter (negative polarity inside)VOL AttenuatorLightweight, portable and full metal shell. Single knob control to adjust the degree of attenuator. Using attenuator to lower level for a clean sound. Using the Signal Pad anywhere in your effects chain. The light flashing when working. True bypass in order to protect signal integrity when the pedal is not engaged. Foot-switch toggle controlling on/off condition. Input Impedance: 1M ohm Output Impedance: 1K ohm Working Current: 20mADEC Buffer BoosterFull metal shell, exquisite and big sound.Single knob control to adjust the degree of booster.volume =0: clean buffer.volume >0: clean boost.Offering excellent, stable buffering and a fantastic clean boost.The light flashing when working.True bypass switching in order to protect signal integrity when the pedal is not engaged.Foot-switch toggle controlling on/off condition.Input Impedance: 1M ohmOutput Impedance: 1K ohmWorking Current: 20mAPower Supply: 9V DC Charger (Not included)Clean BufferGuitar buffer effect pedal with 1/4″monaural input/ output jacks. Mini size, durable zinc-aluminum alloy body. Decreasing the loss of guitar signal and tone effectively. Pure signal path, ON/ OFF LED indicator light. Allows you to use long cable, effect pedals and speakers with your guitar without any signal degradation. Material: Zinc-aluminum alloy Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9VMINI SCREAMER Tube OverdriveOverdrive guitar effect pedal with true bypass switch. Mini size, durable zinc-aluminium alloy body. With Drive, Level and Tone control knobs. Offers smooth, natural overdrive and boost effects. Single 1/4″monaural input and output jacks. With ON/ OFF LED indicator light. Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9VPlexi-m DistortionElectric guitar distortion effect pedal for guitar players. With 3 functional knobs(Tone/Level/Gain) for adjust the performance of the distortion effect. True bypass foot-switch for switching between distortion effect and bypass status. LED light for indicating effects or bypass status. Functional Knobs: Level knob: adjust the level of overall output Tone knob: adjust the tone color of the distortion sound Gain knob: adjust the gain of the distortion sound Input: 1/4 inch monaural Jack Output: 1/4 inch monaural Jack MM Sliver Overdrive4 functional knobs(Gain/Volume/Bass/Treble) for adjust the performance of the overdrive effect. True bypass footswitch for switching between overdrive effect and bypass status. LED light for indicating effects or bypass status. compact size, durable and portable. Input: 1/4in monaural Jack Output: 1/4in monaural Jack Power Supply: DC 9V AC adapter (center minus plug)(not included)Dual Foot-switchDesigned for using in anywhere a dual momentary foot-switch is needed. With two momentary foot-switch and one 1/4" stereo jack. Compact size with full metal shell, lightweight and durable. Please note that it can not switch channels. Connector: 1/4"Pure BufferFor completely eliminating cable capacitance and tone sucking. With it, your guitar will sound like it's plugged directly into your amp with a short cord. With 1/4" input & output jacks. Compact size with full metal shell, lightweight and durable. Powered by DC 9V power adapter.(not included) Connector: 1/4" jackAMP TURBOMulti-functional guitar effect pedal, can be used for overdrive, boost and pre-amp pedal.With smooth, round, balanced and low-to-medium gain overdrive effect.With separate controls for bass and tone.The boost and overdrive channel can be switched independently by the foot-switches.Compact size and full metal housing, portable and durable.Input: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)CRAZY TONE Distortion MP-50 High-quality distortion guitar effect pedal with true bypass. 2 switches: Vintage/Modern Switch & Boost Switch; --Vintage/Modern Switch: for setting the overall voicing of the pedal's frequencies, to be either darker with a classic tonality or brighter and more modern. --Boost Switch: for altering the internal gain structure of the pedal to bring much more drive, heavier and more aggressive distortion. 4 control knobs: Tone, Contour, Volume and Gain; --Tone: for adjusting the frequency emphasis on the highs. It interacts substantially with the Contour knob and Vint./Modern switch. --Contour: for adjusting the frequency emphasis overall. It interacts substantially with the Tone knob, and is affected by the Vint./Modern switch as well. --Volume: for adjusting the output level. There's plenty of volume on tap in either standard or Boost mode. --Gain: This control, in conjunction with the Boost switch, lets you dial in anything from a classic, almost laid back early rock tone all the way to modern high-gain. With LED light for indicating effects or bypass status. Compact size with full metal shell, portable and durable. Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9V adapter (negative polarity inside)TAP SWITCH Can be used with a variety of pedal types. Perfect for pairing with other tap pedal, such as Delay. With one normally open momentary foot-switch and one 1/4" output jack. Compact size with full metal shell, lightweight and durable. Connector: 1/4" jack Item Size: 5 * 5 * 3cm / 2 * 2 * 1.2inGold Horse Overdrive Guitar overdrive/ boost effect pedal , with 2 modes of voice to choose(Normal/ Soft).3 functional knobs(TREBLE/OUTPUT/GAIN) for adjusting the performance of the overdrive effect.True bypass foot-switch for switching between overdrive effect and bypass status.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable.Input: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3inItem Weight: 147g / 5.2ozPackage Size: 11.5 * 6.5 * 6cm/ 4.5 * 2.6 * 2.4inPackage Weight: 180g / 6.3ozSilver Horse Overdrive Guitar overdrive/ boost effect pedal , with 2 modes of voice to choose(Normal/ Soft).3 functional knobs(TREBLE/OUTPUT/GAIN) for adjusting the performance of the overdrive effect.True bypass foot-switch for switching between overdrive effect and bypass status.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable.Input: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3inItem Weight: 147g / 5.2ozPackage Size: 11.5 * 6.5 * 6cm/ 4.5 * 2.6 * 2.4inPackage Weight: 180g / 6.3ozCE-NANO ChorusElectric guitar chorus effect pedal for guitar players.With 2 functional knobs(RATE/DEPTH) for adjust the performance of the chorus effect.True bypass footswitch for switching between chorus effect and bypass status.LED light for indicating effects or bypass status.Functional Knobs:--RATE knob: adjusts the speed of the chorus effect--DEPTH knob: sets the depth of the chorus effectInput: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Item Weight: 145g / 5.1ozNoise Reduction Gate MP-40Eliminates hiss and excess noise from your effects chain.Designed with a single gate knob to set the volume threshold.Reducing noise capability up to 26 dB.True bypass switch providing clearest tone, with a LED indicator to state working condition.Single 1/4″monaural input and output jacks, 9V DC adapter power supply.Color: GoldEffect Type: Noise GateMaterial: MetalSignal Input: 1/4″Monaural JackSignal Output: 1/4″Monaural JackPower Supply: DC 9VItem Weight: 125g / 4.4ozGreen Drive Overdrive MP-53Premium quality classic blues/rock pedal, works well with complex and compressed over-driven amp sound.Offers smooth, natural overdrive and boost effects.With Body, Volume and Drive knob for adjustment.True bypass switch gives you transparent tone, with a LED indicator.Single 1/4 inch monaural input and output jacks, 9V DC adapter power supply.Effect Type: Little Green DriveColor: Indigo blueMaterial: zinc aluminum alloySignal Input: 1/4 inch Monaural JackSignal Output: 1/4 inch Monaural JackPower Supply: DC 9VItem Weight: 142g / 5.0ozLOOP BOXChannel selection Product Description Make any effect True-Bypass! The Loop Box Pedal solve some common signal path scenarios. There are three basic ways to use this: -It can serve as a switch to enable an effects loop in between the Send and Return paths. Plug your guitar signal into the IN input and then switch on and off your effects all as one switch. -It can be used to switch from multiple instruments. One instrument is plugged into the IN jack and a second instrument can be plugged into the return. Switch between them without having to unplug instruments and quietly. -Can be used to split one signal to two amps. Features: Loop Switch / Effects Loop Pedal IN, OUT, SEND and RETURN Jacks Signal passes passively through pedal when not engaged from IN to OUT When engaged, signal is sent through the SEND output and received to the RETURN and then forwarded to the OUT Jack. Material: Zinc-aluminum alloy Signal Input: 1/4″Jack Signal Output: 1/4″Jack Power Supply: DC 9V Uses standard 9V Boss style adapter (not included)XP BoosterFull metal shell, exquisite and big sound.Single knob control to adjust the degree of booster.Use the highest quality parts available with a discrete FET design and low impedance output.XP booster provides up to +20dB of unadulterated boost with multi-dimensional shimmering that highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings.The light flashing when working.True bypass in order to protect signal integrity when the pedal is not engaged.Foot-switch toggle controlling on/off condition.Model: XPInput Impedance: 1M ohmOutput Impedance: 1K ohmWorking Current: 20mAPower Supply: 9V DC or 18V AC Charger (Not included)Item Weight: 124g / 4.4ozBLUE DELAYAnalog delay guitar effect pedal with true bypass switch. Mini size, durable zinc-aluminum alloy body. Can adjust the level of delayed signal mixed with straight guitar tone. Supports controlling the delay time from 25ms(fully CCW) to 450ms(fully CW). Allows adjusting the repeats of the delay signal. Specifications: Material: Zinc-aluminum alloy Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9VTW DistortionThe TW: the tightest, thickest highest gain distortions ; it sounds more like a 5150® amp to them than a distortion pedal,With a solid three band EQ (you can scoop out those mids without it peeking out the lows and highs like so many other pedals) you can emulate some of your favorite high gain tones – but, as this pedal is so versatile you can easily find a distinctive tone all of your own.There are two distinct voices in the TW, Hard and Brutal. The Hard gives you that warmer thump high gain whereas the Brutal allows a little more sparkle to creep in, giving it that more recent, full audio spectrum feel.So, we’ve already put in loads of gain, maybe more than you need, so let’s stick in a boost switch. What? Putting a boost switch on an already high gain pedal may sound crazy but you’ll be amazed at how well it works. It gives you two options via the Boost Contour blend control. With the boost on and it dialed round to counter-clockwise, your distortion is multiplied and you have the solo sound you have always wanted. Pinch harmonics are just there, in places you’ve never found them before. With it dialed round to clockwise, your pedal turns into a fuzzy monster… Tweak the EQ and you can get tone that will remind you of the Smashing Pumpkins right round to some Pink Floyd kind of fuzzy solo tone. It’s all there, waiting for you.Features:Hand-built effect ,High quality capacitors, resistors, IC.The TW: the tightest, thickest highest gain distortions amp to them than a distortion pedal, With a solid three band EQ,can emulate some of your favorite high gain tones, versatile.There are two distinct voices in the TW, Hard and Brutal. It gives you two options via the Boost Contour blendcontrol.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable. Specifications:Material: MetalInput: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Package Size: 15 * 15 * 7cm/ 5.9 * 5.9 * 2.8inPackage Weight: 530g / 18.7oz Super Rat DistortionDescription:The SUPER RAT is based on the RAT Distortion Pedal ,LM308And Improvements based on the original circuit adds two effects ,Use a three-position toggle switch to change the effects: classic rat ,big boost ,turbo rat.So it can use as distortion ,boost ,pre-amp,.Features:One three-position switch. C- classic rat distortion.B- big boost.T- turbo rat distortion.Tone( Filter) controlGain(Distortion)controlVolume controlTrue bypass switch100% analog signal pathOn/Off LED indicatorDimensions (W/D/H): 112mm X 65mm X 38mmWeight: 0.6 lbs. (280g)Power Consumption: 9VDC/10mABattery Type: 9VDC x 1AC Adapter (Optional): 9VDC, Negative Tips (Regulated recommended) (not included)Input Impedance: 500k ohm (min)Output Impedance: 10k ohmBlack RatFeatures:High-quality distortion guitar effect pedal with true bypass.2 switches: Vintage/Modern Switch & Boost Switch;--Vintage/Modern Switch: for setting the overall voicing of the pedal's frequencies, to be either darker with a classic tonality or brighter and more modern.--Boost Switch: for altering the internal gain structure of the pedal to bring much more drive, heavier and more aggressive distortion.4 control knobs: Tone, Contour, Volume and Gain;--Tone: for adjusting the frequency emphasis on the highs. It interacts substantially with the Contour knob and Vint./Modern switch.--Contour: for adjusting the frequency emphasis overall. It interacts substantially with the Tone knob, and is affected by the Vint./Modern switch as well.--Volume: for adjusting the output level. There's plenty of volume on tap in either standard or Boost mode.--Gain: This control, in conjunction with the Boost switch, lets you dial in anything from a classic, almost laid back early rock tone all the way to modern high-gain.With LED light for indicating effects or bypass status.Compact size with full metal shell, portable and durable.Specifications:Material: MetalSignal Input: 1/4″Monaural JackSignal Output: 1/4″Monaural JackPower Supply: DC 9V adapter (negative polarity inside) (not included)Item Size: 11.5 * 6.5 * 3.8cm / 4.5 * 2.6 * 1.5inItem Weight: 320g / 11.3ozDynaCompressorElectric guitar dynamic compressor effect pedal for guitar players.2 functional knobs(OUTPUT/SENS) for adjust the performance of compression.True bypass foot-switch for switching between compressor and bypass status.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable.Specifications:Input: 1/4" monaural JackOutput: 1/4" monaural JackPower Supply: DC 9V AC adapter (center minus plug)(not included)Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3inItem Weight: 140g / 4.9ozD 250 X Pre-amp OverdriveDescription:D250X Based on DOD 250 Pre-amp OverdriveThe DOD Overdrive Pre-amp/250 (2013) has Gain and Level controls.Gain controls the amount of distortion, from just a touch of grit to all-out grind. Level dials in some subtle body for "always on" performance or huge amounts of boost for boosting solos above a dense stage mix. With the Gain all the way down, crank up the Level to boost your sound and cut through during your solos. True bypass allows your guitar tone to remain pristine even when the D250X is off.Two Models (D/M) to choose .100% True Bypass Switching.Features:Dimensions (L/W/H): 92mm X 38mm X 36mmWeight: 158gPower Jack: 9VDC, Negative Tip (Regulated recommended)Obsessive OverdriveFeatures: Overdrive guitar effect pedal with true bypass switch. Mini size, durable zinc-aluminum alloy body. With Drive, Volume and Tone control knobs. Supports High-Peak (HP) and Low-Peak (LP) functions. The HP function can increase distortion and thicken the sound. The LP function will give you a more accurate rendition of the sound. Specifications: Material: Zinc-aluminum alloy Signal Input: 1/4″Monaural Jack Signal Output: 1/4″Monaural Jack Power Supply: DC 9V Item Size: 3.5 * 9 * 3cm / 1.4 * 3.5 * 1.2in Item Weight: 145g / 5.1oz Package Size: 6.2 * 11.5 * 6cm / 2.4 * 4.5 * 2.4in Package Weight: 185g / 6.5ozCH-VIBE ChorusFeature:The Pedal Chorus/Vibe is a Chorus/Vibrato pedal for making that vintage modulation sound simple.If you combine it with a classical distortion effect you can recreate the enthusiasm of the late 60s. Unlike the expensive,hard-to-find original model, it's compact, simple, easy to use, and can be easily carried around so you can enjoythat "vibe sound."It's not limited to classic tones. For example, if you combine it with an expansive dreamy reverb type effect or other digitaleffects, you can create your own unique new sounds.It's a compact pedal with just 3 control knobs and toggle switches. Experience the sound I'm talking about.True-Bypass Switching CircuitTrue bypass means that when the effect is off your guitar tone will not be affected at all. The true bypass circuit makes sure you haveabsolutely no tone loss or signal reductionthrough the choruspedal in the off/bypass mode. This switch makes sure you have absolutely no tone loss or signal reductionthrough the chorus even in the off mode.Specification:Input impedance: approx. 500KOutput impedance: approx. 10KCurrent consumption: 500mA at 9V DCDC supply voltage range: 9 VDCDimensions (L/W/H): 94(L)MM x 39(W)MM x 32(H)MMPower: 9VDC, Negative Tip (Regulated recommended)(not included)Weight: 165gRC5 6-in-1 Combined effect pedal with 6 effects, including reverb, chorus, distortion, overdrive, booster & buffer. With true bypass for eliminating any signal interference when all switched off.Reverb-- Based on Malekko Omicron SPRING reverb, and supports output level(VOL), dry/wet signal ratio(MIX) and reverb rate(DWELL) controls.Chorus-- Premium all-analog circuitry with bucket-brigade line. RATE and DEPTH knobs provide fine sound adjustment, create some fresh and extensive chorus effects.Distortion-- Based on MXR distortion, the distortion pedal gives you magical classic distortion tones, and supports output volume(LEVEL), and distortion amount(DISTORTION) controls.Overdrive-- Gives you access to warm and amp-like overdrive that's touch sensitive, and supports output volume(LEVEL), frequency(TONE) and overdrive amount(DRIVE) controls.Buffer & Booster-- knob=0: clean buffer, knob>0: clean boost. The buffer is an active electronic circuit that keeps your guitar signal strong and preserves the frequencies of your guitar sound. The buffer-booster offers excellent, stable buffering and a fantastic clean boost.BP BoosterBased on X EP booster Pedal.Uses the highest quality parts available with a discrete FET design and low impedance output, the BP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue.The internal DIP switches let you choose the boost frequencies, and EQ settings.LED light for indicating effects or bypass status.Full metal shell and compact size, durable and portable.Specifications:Internal DIP switchesInput Impedance: 1M ohmOutput Impedance: 1k ohmPower Supply: 9VDC or 18V (center minus plug)(not included)Package Size: 12 * 7 * 7cm/ 4.7 * 2.8 * 2.8inPackage Weight: 196g / 6.9ozSKY Reverb & DelayFeature:The three effects :Digital delay,Digital Delay-verb,Digital ReverbTwo independently modules: Digital Delay-verb,Digital ReverbDigital delay-verb module provides the delay time of 1300msDigital reverb module is multi-parameter adjustableDigital reverb module provides atmosphere reverb with long timeSpecifications:Input Impedance 1MΩOutput Impedance 1KΩPower Supply : DC9V 100mADimension(L*W*H):11.5*6.5*5CMWeight:300gSol918 Multi EffectsFeatures:Multi-Effects Pedal: Reverb+Delay+FX Loop+Overdrive+Distortion, 5 effects in 1 unit.Distortion: based on SHUR RIOT distortion, the distortion is a versatile high-gain distortion pedal with the sonic characteristics and touch sensitivity of a high quality 100 watt tube amplifier. The distortion will transform a super clean amp into an authoritative rock tone that inspires all of your favorite riffs.Overdrive: based on analogman king of tone overdrive. so you can use the full range of the DRIVE knob and it has a little more drive at the top than a normal gain KOT. The mode is improved though, for a louder, stronger distortion sound.FX Loop: the SEND and RETURN jacks let you expand your board with other pedals, the FX LOOP point is positioned between the Delay and Overdrive modules.Delay: based on Mad professor deep blue delay, the delay is a natural sounding digital/analog delay, with the analog direct signal path. containing just the basic delay features: Delay Time, Delay Level and Repeat controls. It was designed to work as an ambiance delay; like that of a vintage tape echo and the repeat , the formation was specifically designed to allow easy setting and less critical setting of delay time.Reverb: based on Malekko Omicron SPRING Reverb, the Spring Reverb Emulator sports a dwell circuit that gives it nearly bottomless depth and a Mix control for wet/dry.True Bypass: for eliminating any signal interference when all switched off.Application Range: suitable for guitar, bass and other electroacoustic musical instrument.Specifications:Material: MetalPower Jack: 9VDC, negative tips (regulated recommended)Item Size: 230 * 69 * 36mm / 9.06 * 2.71 * 1.42inItem Weight: 494g / 17.43ozPackage Weight: 571g / 20.16ozPackage Size: 25 * 8.5 * 6.5cm / 9.84 * 3.35 * 2.56inClassic AC-30Built in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response aswould be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with thefrequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound.GUIDE TO CONTROLSLEVEL: Adjusts the output level of the unit. This control has an exceptionally wide range for maximum compatibility with a variety of equipment.LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.VOICE*: Voiced differently for each pedal in the series. It sweeps through varioustonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style. Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control. -Input Impedance 1MΩ-Output Impedance 1KΩ-Power Supply : DC9V 100mA,Center negative-Dimension(L*W*H):11.5*6.5*5CM-Weight:300gClassic F-DERDescription:CLASSIC F-DR based on Tech21 SansAmp Character Series Blonde Built in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound. GUIDE TO CONTROLS: LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment. LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model. DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive. VOICE: Voiced differently for each pedal in the series. It sweeps through varioustonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control. Pecification: -100% brand new and high quality.-Input Impedance 1MΩ-Output Impedance 1KΩ-Power Supply : DC9V 100mA,Center negative-Dimension(L*W*H):11.5*6.5*5CM-Weight:300gClassic M-SADescription:CLASSIC M-SA based on Tech21 SansAmp Character CaliforniaBuilt in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound. GUIDE TO CONTROLS: LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment. LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model. DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive. VOICE: Voiced differently for each pedal in the series. It sweeps through various tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control. Pecification: -100% brand new and high quality.-Input Impedance 1MΩ-Output Impedance 1KΩ-Power Supply : DC9V 100mA,Center negative-Dimension(L*W*H):11.5*6.5*5CM-Weight:300gClassic M-ShallFeatures: *100% brand new and high quality.*Built in speaker simulation is an integral part of the CLASSIC Series circuitry. *Each model is tuned to match the speaker/cabinet of that amplifier. *It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.*The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.*The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound. GUIDE TO CONTROLS-LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment.-LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.-DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.-VOICE: Voiced differently for each pedal in the series. It sweeps through various tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control. Product parameters: Input Impedance 1MΩOutput Impedance 1KΩPower Supply : DC9V 100mA,Center negative(Not included)Dimension(L*W*H):11.5*6.5*5CMWeight:300g (approx.)Blue Ocean ChorusProduct Features:True-Bypass Switching Circuit.True bypass means that when the effect is off your guitar tone will not be affected at all.The true bypass circuit makes sure you have absolutely no tone loss or signal reduction.through the chorus pedal in the off/bypass mode.Full metal shell and compact size, durable and portable.Specifications:Input impedance: approx. 400KOutput impedance: approx. 2KCurrent consumption: 40mA at 9VDCPower Supply: DC 9V adapter (center minus plug)(not included)Package Size: 12 * 7 * 7cm/ 4.7 * 2.8 * 2.8inPackage Weight: 196g / 6.9ozMini C4 CompressorFeatures:Rotate sustain, attack, level, clipping--4 knobs to adjust, control, finally get desired sound.True bypass provides transparent tone, perfectly retains the original guitar tone.Solid durable aluminium alloy shell; glitter silver coating, rust-proof, long lasting; whole, classic, simple, nice.Compact compressor guitar effect pedal, pocket size, light weight, convenient to anywhere.Work stable, well, effectively reduce dynamic range, make the tracks sound more polished, provide round smooth tone.Specifications:Material: Aluminium alloyColor: SilverItem Size: 94*39*32mm / 3.70*1.53*1.25inItem Weight: 165g / 5.82ozPackage Size: 11*6.5*6cm / 4.33*0.25*0.23inPackage Weight: 180g / 6.34ozNote: Power supply not included. Please use a 9V DC power adapter whose polarity is negative center otherwise, the product may not work properly. Package List: 1 * Effect Pedal 1 * User Manual(English & Chinese) 1 * Year warranty through our store No Duty to Canada and USA FAST 'N FREE USA Shipping (typically about 4 days via USPS ) Ships from Canada *Just to be clear on DUTY, (regardless of what ebay warns buyers of ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty.

Price: 19 USD

Location: Brantford, Ontario

End Time: 2024-08-17T19:12:23.000Z

Shipping Cost: 0 USD