Mini Manual Sewing Machine Pocket Handheld Sewing Machine for Home Travel Use

Description: Feature:1. Small Lightweight: Small in size, light in weight, easy to carry, and easy to maintain compared to traditional desktop sewing machines.2. Applicable Scene: This handheld sewing machine is suitable for field maintenance and emergency sewing at home or while traveling.3. Premium Stainless Steel: Made of premium stainless steel material, this handheld portable sewing machine is safe and durable.4. Simple Operation: Easy to use, simple to operate and repair torn pockets without taking off your pants.5. Ideal Gift: With fine workmanship, it is an ideal gift for friends who are interested in DIY crafts or sewing lovers.Specification:Item Type: Mini Manual Sewing MachineMaterial: Stainless Steel, PlasticSpecifications: 1 SetProduct Use: HouseholdScope of Application: Most Scenarios1. Hold the machine: Hold the machine base with the four fingers of the right hand, and place the thumb on the top of the upper cover of the machine body to hold the machine smoothly.2. Threading: Gently pull out the thread on the spool. Pass through lead diagram.A. and then introduce the tensioning tab.B. Go through the lead wire again.C. The thread that has been drawn is temporarily placed besides the needle, and the threader is passed through the needle hole from the front of the needle (to the body joint), and then the thread is introduced into the small hole of the threader, exit the threader and pull out the head thread About 2-3 cm pressure plate can be pressed.3. Placing the cloth: Use the index finger of the right hand to lift the pressing plate, put the fabric to be sewn (thickness not more than 0.8 mm) under the pressing plate, and gently put it back on the pressing plate to press the fabric4. Sewing operation: Hold the fabric with the left hand, press the top of the upper cover gently and quickly with the thumb of the right hand, and press the top of the cover to the bottom, and then press the thumb down again. Repeatedly, the cloth feeding mechanism automatically sends the sewing material to the left. The right hand of the machine is gradually moved to the right, and the left hand is holding the cloth to gently move the sewn material to the left according to the sewing rhythm, until the sewing ends;5. End: When sewing is over, cut the thread with scissors, and gently pull up the pressure plate to take out the fabric. From the reverse side of the fabric to be sewn, pull out the last section of thread, make it pass into the following section of the loop, pull it tight and tie a knot, the stitch will be firm, do not pull the thread by hard pulling the fabric at the end of sewing head, so as not to damage the needles and pins6. This machine can automatically feed the cloth and adjust the tension between the pins, but it is necessary to pay attention to the following points:A. The pins are too tight, adjust the pressure nut slightly counterclockwiseB. The pins are too loose, adjust the pressure nut slightly clockwiseTie the correct pin tension as shown. If the stitches are larger, the left hand can be slightly faster to pull the cloth. If the stitches are denser, the left hand can be slightly slower to pull the cloth7. Change the spool; if you use a large spool, you can connect the spare extension rod to the spool shaft and put it into the large spool. Put the spare plastic cover on the end of the rod to fix the large thread ball, then re thread the thread, adjust the tension of the thread, and then sew, it is very effective to use 50#-90# cotton thread or synthetic thread;8. Needle change: Loosen the fixing screw and take out the broken needle. Install a new needle as shown, be careful to make the flat face of the needle face up to the fixing screw, do not install it backwards. Needle type DHK 14.Package List:1 x Mini Manual Sewing Machine1 x Threader1 x Long PoleNote:1. There is an error of 1 to 2 inches (about 2.5 to 5.1 cm) in manual measurement, please understand.2. Due to the difference between different monitors, the actual color may be slightly different from the picture.On Sep 1, 2024 at 19:47:07 PDT, seller added the following information:

Price: 8.9 USD

Location: California

End Time: 2024-10-02T02:19:23.000Z

Shipping Cost: 0 USD