MARIO BOO GHOST V2 Vinyl Decal Sticker Window Car Truck Drift JDM

Description: We ship our decals on the same day or the next business day following the purchase (Monday – Friday). Orders placed after 5PM AZT on Friday – Sunday, will be shipped on the following Monday. Multiple items will be combined for lower shipping costs to you. Tracking information (if available) will be uploaded after item has shipped. To purchase tracking, please select USPS First Class option on checkout. Note: Please make sure that your shipping address is correct. All items will be delivered to the address that is listed on the account used for payment. If the item is not received or lost in shipping, please contact us for assistance in this matter. We accept payments through eBay (Credit Card, eCheck, Debit). We ask that all payments be made within 48 hours of purchase. If you purchased the item by mistake or no longer are interested in the item, please be sure to let us know as soon as possible so a cancellation can be initiated. Customer Satisfaction is our number one priority. If for any reason you are unhappy with your purchase, you can return it within 14 days and we will give you credit towards the purchase of a different item OR refund the purchase price. Note: Buyer is responsible for the return shipping costs. In order to qualify for a refund, the decal must be returned in NEW and ORIGINAL condition. Decals can be applied to any smooth clean surface. Examples: • Windows • Laptops • Macbooks • Tablets • Helmets • Skateboards • Mirrors • Toolboxes • Computer Cases • Vehicle Body Panels Application Instructions Clean the area of application with a damp clean cloth. Removing dirt, dust and grease will ensure better adhesion of the decal. To ensure that the decal is properly stuck to the transfer tape, before installing the decal, take a squeegee application tool, or 2 credit cards back to back and press firmly over the whole surface of the face of the decal while it is still laying flat on the table. Apply a long piece of masking tape along the top of the decal with approx half of the tape on the decal and half on the vehicle surface. This will make a large hinged 'flap'. The hinged flap will make installation much easier. For long thin designs, you can cut the decal in half (up and down between the lettering) once it has been taped to create two flaps for even easier installation. Raising the large hinged 'flap', and begin to peel the wax paper backing off the decal (exposing the sticky side for the decal). Be sure to only expose half of the decal. DO NOT ALLOW THE STICKY PART OF THE DECAL TO TOUCH THE VEHICLE SURFACE. With the wax paper backing peeled half way downward, begin to apply the sticky side of the decal to the vehicle surface with the squeegee or credit card. Once the entire sticky side of the decal is applied to the vehicle, go over the decal with the application squeegee, with increasingly harder strokes. Then begin peeling the transfer tape covering the decal. Finish removing the transfer tape covering, peeling from one side to the other. Any small bubbles can be removed using a small razor blade. Take the razor blade and poke a small hole in the vinyl at the source of the bubble. Then with the squeegee, push the remaining air out of the bubble. Most bubbles will dissipate within 3 weeks of installation due to sunlight.

Price: 3.25 USD

Location: Gilbert, Arizona

End Time: 2024-03-19T20:12:13.000Z

Shipping Cost: 0 USD