Description: This extremely lightweight polymer magwell will make your load and reload much faster. The magwell is designed to improve your grip and shooting performance by giving the bottom of your hand and pinky finger more support, which adds comfort as well. Magwell for Glock fits Gen 1,2 and 3. 17/22/23/24/37/38/31/32/34/35/41/ Fits with 9mm .40 .45 and 357 Sig Gen 1-3 MAGWELL DOES NOT FIT POLYMER 80 MODELS MADE IN USA!!! Made from a proprietary glass filled nylon and carbon fiber for extreme durability. Very easy to install, No alterations to your gun! Magwell protects your pistol if it gets dropped and lands on the butt of the gun. Includes allen wrench for installation. This product is not compatible with oversize magazine base plates, including Vikers Tactical. DOES NOT FIT POLYMER 80 Free returns Installation 1. Remove any existing grip plug from the back of the grip. 2. Push the grip plug (provided) in the hole of the back of the grip about 1/2" down,so that the brass insert is facing down into the gun. 3 Place magwell up to the bottom of the grip. Make sure your hole from the magwell lines up with the threads from the grip plug. 4. Push the magwell up by hand as far as you can. NOTE: Push the front and back at the same time using a lot of force until it stops. 5.Place screw into the hole of the magwell and thread it into the grip plug with the provided allen wrench, until you feel tension. Once you feel tension, take about a full turn more for a tight fit. DO NOT OVER TIGHTEN!!! Please note: Some grips are different than others, so magwell might fit different and require a tighter fit. The Recoil buffer pads FOR Glock Generation 1-3 are designed to eliminate the metal slide from contacting the polymer frame each time the weapon is fired. The buffer will come in contact with the frame instead of the metal slide, resulting in less recoil, better muzzle control and a longer service life This buffer is made out of a durable polyurethane material, and is easily installed between the recoil spring guide and the end of the slide. This part is to be replaced every 1,000 rounds. Will not fit Generation 4 models. Fits on the following Models: 17,17L,18,19,20,21,22,23,24,31,32 & 37
Price: 10.25 USD
Location: Norwalk, California
End Time: 2024-09-07T19:05:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: PMC Defense
Model: Glock Buffr Gen 1-3 17, 17L, 18,19,20,24,22,24,31,
MPN: PDGB6G1-3
Country/Region of Manufacture: United States
