LUXMAN LMC-5 MC type phono cartridge Turntable Record Audio Genuine product NEW

Description: LUXMAN LMC-5 MC type phono cartridge Turntable Record Audio Genuine product NEW From Japan Description■Stylus and power generation circuit・The power generation mechanism is an MC type that can reduce the weight of the armature.・Uses a Shibata needle with less auditory noise and more information.・Uses an aluminum cantilever that is compatible with the Shibata needle and produces a straightforward tone.・The LR generator coil is symmetrically wound in a series-wound cross-shaped coil to reduce weight and reduce sensitivity differences between channels.・Magnetic circuit structure with small loop area to reduce intrusion of external noise・The coil uses UEW with a diameter of 30 μm, which is the thinnest in the range that is resistant to disconnection, and the direction of the wire is fixed.・Low-distortion structure that uses a single-point support method using piano wire to clarify the point of the vibration system ■Body structure and design・The stylus unit is considered to be acoustically equivalent to a microphone, and resonance and reflected sound around the unit are thoroughly suppressed.・Beside the stylus unit, there is an outer wall that also protects the cantilever.・Structural walls with inverted egg-shaped curves to reduce resonance and reflected sound・Body structure stripped down to only the base and minimal outer walls to reduce weight and prevent resonance- Body design anodized in deep red, Luxman's corporate color. specificationPower generation method: MC (MOVING COIL) typeInternal impedance 4.7 ohm (1kHz)Appropriate stylus pressure 2.1 to 2.3g (2.2g standard)Output voltage 0.4mVPlayback frequency range 10Hz to 35kHzChannel separation/balance 28dB (1kHz)/0.5dB (1kHz)Recommended load resistance (when connecting head amplifier) 40Ω or moreRecommended load resistance (when connecting step-up transformer) 2.5 to 10ΩDynamic compliance 8×10-6 cm/dyne (100Hz)Needle tip/shape: Solid diamond/Shibata needleCantilever φ0.5mm aluminumVertical tracking angle 25°Magnet samarium cobalt BH20Coil 30μm UEWTerminal Φ1.2mm, White: L(+)/Blue: L(-)/Red: R(+)/Green: R(-)Magnetic circuit constituent material Pure ironBody aluminum A6063External dimensions, shell mounting holes 17.0(W) x 18.3(H) x 21.3(D) mm (excluding terminals), M2.6mm x 2Mass　8.5gAccessories Owner's manual, shell mounting screws/washers, hex wrench, stylus protection coverShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Price: 2103.52 USD

Location: Otaru-Shi

End Time: 2024-09-16T01:43:38.000Z

Shipping Cost: 0 USD