Description: Linear AK-11, ACP00748 Stand Alone Exterior Surface-mount Digital Keypad Linear AK-11, ACP00748 Stand Alone Exterior Surface-mount Digital Keypad The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code. The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad, each relay will assume the state it was in when power was removed.Two indicators show the status of the entry system. The left indicator lights red to indicate power, then turns green when access is granted. The right indicator lights yellow when the keypad is in lockout condition (from too many incorrect code entries). The keypad’s courtesy light illuminates the keys. The light can be programmed to activate indefinitely, or for 1, 2, 3, or 4 minutes after the last key press, or not light at all. An internal sounder beeps when each key is pressed.The DOOR SENSE/INHIBIT input can be used two ways. If programmed for “door sense”, a switch on the door detects forced entry or door ajar situations. If programmed for “inhibit”, the input can be wired to a “service” switch or automatic timer that will disable the Relay #1 when required.The REQUEST-TO-ENTER input can be wired to a pushbutton or fire access keyswitch to provide codeless entry for authorized personnel. The “anti-passback” feature prevents using the same code twice before the programmed time elapses.The ALARM SHUNT output activates when access is granted. This output can be wired to shunt alarm contacts on the access door/gate to prevent triggering of an alarm when authorized access occurs. Two solid state outputs, capable of switching 100 mA to common, are programmable to signal forced entry, door ajar, lockout, alarm circuit shunting, request-to-enter, and keypad active conditions.The AK-11 is powered from a 12-24 Volt AC or DC source. Power can be obtained from the access device or a separate power supply. The EEPROM memory retains all entry codes and programming, even without power.FeaturesSelf-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilitiesRugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestalFour independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry codeUp to 480 programmable input codes of one to six digits each for activating either or both relaysTwo LED indicators show system statusKey operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockoutProgrammable courtesy light illuminates keypad for 1, 2, 3, or 4 minutes, or always onTactile and audible feedbackKeylock secures keypad to mounting backplate4″ W x 5.5″ H x 3″ DOrder number: ACP00748AK-11Dimensions:4.0″ W x 5.5″ H x 3.0″ D (101.6 x 139.7 x 76.2 mm)ELECTRICALVoltage:12-24 Volts AC or DC (AC supply must be transformer isolated)Current:10 mA typical, 150 mA maximumOUTPUTSMain Relay:Form “C” 5 Amps @ 28 Volts maximumAuxiliary Relay:Form “C” 1 Amp @ 28 Volts maximumSolid State Outputs:Short-to-common 100 mA @ 24 VDC maximumENVIRONMENTALTemperature:-22° F to +149° F (-30° C to +65° C)Humidity:5% to 95% non-condensingAccessories for use with the AK-11ModelDescriptionGNB-1Burial Mount GooseneckGNC-1Curb Mount Gooseneck Payments & Returns Policy
Price: 236.16 USD
Location: Miami, Florida
End Time: 2023-11-01T00:48:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Type: Digital Keypad
Brand: Linear
Compatible Brand: Linear
Manufacturer Warranty: 1 Year
Model: LINEAR ACP00748
MPN: ACP00748